similar to: routed subnet problem

Hi, Sorry if off topic, but is anyone here on this list using it? I am currently searching for a good router for my home network wich supports SIP. Many thanks!

I've been running Tinc on my routers for several years. I thought I'd do an integration of tinc with gui in Tomato firmware because I find it useful. It's been working well for me, but I'm sure there's there's a bug or two, or something I've overlooked. Let me know of anything and I'll correct it in a future release. I created a tutorial for Tomato users here.

I have tried everything I could possibly think of to get printer driver download working with Samba 2.2.3a-6 and CUPS 1.1.15-4 (latest Debian unstable packages). I am wondering if anyone else has go this to work at all (with newer versions of samba or cups?) -- if so please let me know to give me some hope. Or else I am thinking this is officially 'broken'. CUPS is working perfectly

Dear all, I am trying to configure a basic TINC vpn between two sites using OpenWRT routers. The link seems to work, the ping between the two routers is ok, but I can't ping hosts between the subnets behind the routers. This is the configuration: ======== SITE 1 (CLIENT) - polimnia (subnet 192.168.4.0/24, gw 192.168.4.1) tinc.conf ------------- Name = polimnia ConnectTo = calliope

I have done it... added on both routers a new firewall zone covering the tinc interface, policy in accept, out accept, fwd accept, interzone forwarding from/to LAN.... when I do it, I am not even able to ping the routers between them, even though the PING PONG is ok in the tinc debug.... 2018-05-24 20:28 GMT+02:00 Naemr . <naemrr at gmail.com>: > did you add a forwarding allow rule from

G''Day All, I''m putting together a PSARC case to begin integration of the DTrace network providers. I''ve drawn up a rough plan which splits this project into over a dozen smaller steps, as documented on the network provider page: http://www.opensolaris.org/os/community/dtrace/NetworkProvider#Plan Below is a draft PSARC document for task 1, IP provider send/receive

Hello everybody, To make all clear; I am newbee in shorewall, but... I''ve tried to connect two computers by Mandrake Connection Sharing facility. (Mandrake 9.1). Briefly, the problem is that after all that auto-configuration activities the network is completely down, just because shorewall. The result of calling `shorewall debug start` by hand is available at the end of the

Hi; How I can make my configuration to allow the sip phones only from specific IP addresses range (for example from 192.168.10.1 - 192.168.10.50) to be allowed to connect for asterisk? In other words, in addition to be authenticated based on the username and password, it is required that the IP address of the Phone to be from this range. How? Regards Bilal

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Hi, I have been messing arroudn with tinc for a while and now I got a configuration working like the example (4.7) from the manual I have 3 systems, in my case system a is the only one that can be accessed directly. B and C connect to A I have 3 subnets A 5.1.0.0 gw 5.1.0.1 B 5.2.0.0 gw 5.2.0.1 C 5.3.0.0 gw 5.3.0.1 This work fine and the gateways are ip number son t he interfaces of the 3

How does one specify two different ports in the same host file? When lapops are hardwired versus when mobile on a totally different lan. address0 71.17.72.27 address1 192.168.2.27 port0 22755 port1 655

Hi list! I've got a debian "etch" box running samba 3.0.24. The server is a firewall (running Shorewall 3.2.6) with five NICs: eth0 -> DSL (it has a public IP address and it allows all the people browse by masquerading other interfaces) eth1 and eth3 -> bond0 (IP address is 192.168.1.1/24) eth2 and eth4 -> bond1 (IP address is 192.168.2.1/24) BTW, bond+ refers to an

Hi folks, I have a strange situation. When I add branches to the tree, everything goes to the default class. The error might be obvious, but I cannot find it. I would really appreciate your help. this works, nothing goes to "1:9999": ############################################################################# /sbin/iptables -F -t mangle /sbin/tc qdisc del dev eth1 root >

I have a server running Centos4. I found I was seeing some network problems so I tried "route" and found there was no routing. I thought reboot would solve it but it didn't. I had to manually enter a route to the default gateway, there is still no route to the loopback interface. How is this possible? I thought there was default routes built into the kernel, taken from

Hello, I'm running a few tests here with two locations. site1: server-site1.gsg.local subnet 192.168.200.0/24 site2: server-site2.gsg.local subnet 192.168.190.0/24 both are connected via VPN. I migrated an samba3 domain at server-site1 it gets Default-First-Site-Name assigned. Then I joined the new samba4 domain withe server-site2. Both servers work and i can join and access them with

Hi all! Do anybody has a full working environment using externip on an asterisk box behind a nat? I tried with two diferent boxes (Elastix-1.4.24 e Trixbox-1.4.22-3)and the asterisk do not replace neither contact, neither sdp headers info with the externip informed on sip.conf general parameters. I used these two statements: externip=XXX.XXX.XXX.XXX localnet=192.168.200.0/255.255.255.0 Do

Hello everyone, I have a problem regarding gre tunneling, I have two linux box both of them has a private network and the linux A is connected to the internet via wireless radio and the other linux B is connected to the internet via lease line. Here is the setup of my two linux box Linux A eth0 = 203.189.x.1 (internet) eth1 = 192.168.1.1 (going to hub private network) Linux B eth0 = 205.198.x.1

Hi, after trying for days I ended up with a working tinc configurazion of 2 subnets, now my goal is to add 2 more subnets and comunicate. I might seem dumb at this point but honestly I don't work in IT or Networking stuff, and so I dont have that deep knowledge. A little explanation of my configuration is HOST A (VPN server) Public IP: 1.2.3.4 tun0 Subnet = 192.168.10.0/24 tun0 IP =

So i was playing around with Samba multi channel and it was not working as i originally expected it. I have two hosts: my workstation running up to date Windows 10 with 2 interfaces my server running Gentoo with Samba 4.5.4 with 2 interfaces (all connected to the same network) workstation has IPs 192.168.2.114, 192.168.2.115 server has 192.168.2.16(enp2s0f0),192.168.2.17(enp2s0f1) i'm

did you add a forwarding allow rule from tinc interface to lan and vise versa on both ends? even with firewall off default is to not forward till told to do so. On Thu, May 24, 2018, 10:07 AM Davide L <davide.lovreglio at gmail.com> wrote: > Dear all, > > I am trying to configure a basic TINC vpn between two sites using OpenWRT > routers. The link seems to work, the ping