similar to: Libvirt "tc ingress qdisc" automatically removed by ovs vlan tag setting, how?

After some digging in openvswitch code. My wild guess is that vlan tag reconfiguring triggered iface_configure_qos (vswitchd/bridge.c), which in turn called netdev_set_policing to reset ingress policing rate. Although there's no ingress_policing_rate set in my case, existing ingress qdisc still remove by default. Could some openvswitch guy help to confirm and suggest how to fix or workaround?

On Wed, Jul 17, 2013 at 6:06 AM, Qiu Yu <unicell@gmail.com> wrote: > After some digging in openvswitch code. My wild guess is that vlan tag > reconfiguring triggered iface_configure_qos (vswitchd/bridge.c), which > in turn called netdev_set_policing to reset ingress policing rate. > Although there's no ingress_policing_rate set in my case, existing > ingress qdisc still

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

On Thu, Jul 18, 2013 at 12:15 AM, Ben Pfaff <blp@nicira.com> wrote: > On Wed, Jul 17, 2013 at 6:06 AM, Qiu Yu <unicell@gmail.com> wrote: >> After some digging in openvswitch code. My wild guess is that vlan tag >> reconfiguring triggered iface_configure_qos (vswitchd/bridge.c), which >> in turn called netdev_set_policing to reset ingress policing rate. >>

Hello! How can i operate with openvswitch without root rights? For example - i can add my user to kvm group and create vm from libvirt with my own user, but now i'm failed with creating port. errors in logs: Mar 06 14:04:46 selfip.ru ovs-vsctl[19065]: ovs|00001|vsctl|INFO|Called as ovs-vsctl --timeout=5 -- --if-exists del-port Mar 06 14:04:46 selfip.ru ovs-vsctl[19065]:

Thanks for answers,but as I see libvirt call ovs-vsctl that tries to connect to ovs-vswitchd socket,that have rw to root.how can I specify socket permissions in vswitchd? On Thu, Mar 06, 2014 at 02:05:15PM +0400, Vasiliy Tolstov wrote: > Hello! How can i operate with openvswitch without root rights? > For example - i can add my user to kvm group and create vm from > libvirt with my own

Hi, I have an existing OVS bridge, that I can see in ovs-vsctl and use for other purposes. I've edited the machine's XML as instructed in http://docs.openvswitch.org/en/latest/howto/libvirt/ When I try to start the VM, i get error: Cannot get interface MTU on 'ovsbr': No such device Any ideas? (Note: I can't see the ovs switch in brctl show or any other regular kernel tool,

I have installed OVS from sources using the installation steps mentioned on this link: http://docs.openvswitch.org/en/latest/intro/install/general/ I had installed libvrt, KVM, QEMU and all the necessary packages using apt-get. My KVM-QEMU hypervisor has been running well. To add a VM with the port attached to OVS bridge I changed the XML domain file as per the instructions on this page:

Hi, I have two systems(a laptop and a desktop) connected with an Ethernet cable. Desktop is using the Internet through the laptop wireless LAN. Both systems have Ubuntu 11.10 with XEN 4.1.2 Hypervisor. I have compiled OpenvSwitch-1.5 on both the systems as well. In Linux Bridge mode both can ping each other. Problem: LINUX bridge is used in both systems and both can access the internet but as

Hi list, I'm using OVS as backend for guest networking on my hypervisors. VLAN configuration for each interface is specified into the guest XML definition. When I need to change VLAN configuration of a running guest, I first edit the inactive XML to keep the changes for future boots, then I use ovs-vsctl to instruct the changes on the existing OVS Port. The problem happen when the guest is

I am running NOX controller with a python script that prints out the destination mac and the source mac for each packet arriving at the now controller and then floods it out. So here's what happening: With em1 connected, all the packets that arrive at em1 are coming to the controller and printing out the details. However, without em1 connected to the OVS, when I have the following setup:

On Tue, 2017-07-11 at 14:56 -0400, Laine Stump wrote: > The cleanest way to make this work would be to enhance the function > qemuDomainChangeNet() to know what to do when it detects that the > vlan > tag was changed with a device update ("virsh update-device") - this > command can take effect immediately rather than waiting until the > next > time the domain is

The error that you're showing doesn't appear to be related to permissions; the "ovs-vsctl del-port" command requires that you specify the port that you want to delete. --Justin On Mar 6, 2014, at 2:05 AM, Vasiliy Tolstov <v.tolstov@selfip.ru> wrote: > Hello! How can i operate with openvswitch without root rights? > For example - i can add my user to kvm group and

Hi, my system got updated to libvirt 6.0.0 (from 5.6.0) this morning, and now I'm having problems starting VMs that make use of openvswitch portgroups. When I start a VM, I get this error message on virsh: > virsh # start testvm > error: Failed to start domain testvm > error: An error occurred, but the cause is unknown The system log contains: > Mar 30 09:45:39 tplinux

On 05/13/16 20:04, Laine Stump wrote: > On 05/13/2016 09:57 AM, Richard Harman wrote: >> I've debugged this, and I think the interfaceid stuff in network XML >> isn't doing much besides setting a custom interfaceid in an OpenVSwitch >> table that really has no effect on the operation of OpenVSwitch. I >> think the -- set Interface vnet0

Hey folks, I'm working on setting up a Cuckoo sandbox malware lab at home, and can't seem to get openvswitch and libvirt to work together as-documented. I'm not subscribed to the list, so please reply-all. Thanks in advance! I've debugged this, and I think the interfaceid stuff in network XML isn't doing much besides setting a custom interfaceid in an OpenVSwitch table that

On 30. 3. 2020 11:10, Thomas Pircher wrote: > Hi, > > my system got updated to libvirt 6.0.0 (from 5.6.0) this morning, and > now I'm having problems starting VMs that make use of openvswitch > portgroups. I don't see any changes between 5.6.0 and now done to openvswitch in libvirt (apart from harmless code reworks towards glib). > > When I start a VM, I get this

Michal Prívozník wrote: > Can you please turn on debug logs and share them? > > https://wiki.libvirt.org/page/DebugLogs Thanks for replying, I have downgraded libvirt back to version 5.6.0 (and VMs were again able to start), but I will try to reproduce the problem on another machine in the next few days and post the logs here. Thanks, Thomas

On Thu, Mar 06, 2014 at 02:05:15PM +0400, Vasiliy Tolstov wrote: > Hello! How can i operate with openvswitch without root rights? > For example - i can add my user to kvm group and create vm from > libvirt with my own user, but now i'm failed with creating port. > > errors in logs: > Mar 06 14:04:46 selfip.ru ovs-vsctl[19065]: > ovs|00001|vsctl|INFO|Called as ovs-vsctl

Hi All, First time mailing here. I have installed on a CentOS 7.0 KVM (with DPDK and OVS) one Deep Packet Inspection VM. I have one channel and some virtual traffic generator. The traffic is lost between dpdk vhostuser and the DPI VM. The setup is attached. Any suggestions or ideas? Regarding the OVS+DPDK configuration, the following configuration is already made: - SELINUX is disabled - QEMU