similar to: Getting nwfilter to work on Debian Wheezy

Hi, I contact you as i have difficulties to use nwfilter with KVM host. I want to implemente flow filtering between my Linux guests. I created the following filter : cat admin-dmz-internet.xml <filter name='admin-dmz-internet'> <!-- this zone is an SSH ingoing only zone --> <!-- but SSH can go to an other SSH proxy --> <filterref

Dear List! I use a shorewall 2.0.8 on a Debian sarge system. I use a DSL connection to the Internet (ppp0 - eth1 to the modem) and a bridge to the local lan. The bridged config i''ve made with bridge.html from the shorewall site. The Bridge is between local net and a openvpn tap device. This works. I ccan make tunnels, and a can make a lot of things through the firewall. I can get a list

Hello, I''ve installed on a debian squeeze server, xen 4 with one VM which run in route mode configuration with an IP failover. I wanted to create another VM which turn in nat mode, so I make that : - I let my xend-config.sxp with : (network-script ''network-route netdev=eth0'') (vif-script vif-route) because my first VM is the most important.... For the second, I

Hello, I'm having problem setting up filtering traffic for a virtual machine managed by libvirt. Strange thing is, such a setup has been working fine for me on an older version of distro (namely, opensuse 11.3 w/updates, kernel 2.6.34, libvirt 0.8.8) but refused to work on shiny new opensuse 12.4 (kernel 3.7.10, libvirt 1.0.2). The definition of filter in question is pretty simple:

Hello! I am using shorewall shorewall-2.0.11-1 on fedora core2 (iptables-1.2.9-95.7). My box has 2 physical nic´s plus one virt. ipsec interface for a freeswan-vpn connection. A few days ago, portsentry spit out a lot of connections from windows clients (port 135, 445). Ooops. I review my shorewall settings but could not find a mistake. So I took a win-client and established a second

I''ve seen a lot of threads w/ similar problems, but none have posted a resolution. I am using Debian 4.0r1 (Etch). I was using the xen packages from stable, but have tried w/ testing as well and the problem persists. http://pastie.caboo.se/95144 Host is 10.0.0.20 on network 10.0.0.0/24. Dom0 is thus 10.0.0.20 DomU is 10.0.0.30 When the bridge is enabled, DomU can ping everything.

Hi, I've been able to get tinc setup when I flush all my iptables, but after enabling iptables and a delay I get a "Destination Net Unknown". I have three host (HOME10.0.3.2, MASTER 10.0.3.1, WEB 10.0.3.3) MASTER and WEB are in Digital ocean in the same data centre. HOME <---> MASTER <---> WEB I've tried multiple forwarding/masquerading/etc rules and

Hi My situation: I have two pc''s with public ip''s (192.159.56.206(webserver) and 84.196.123.65(mail-gateway)) in the dmz. The firewall (84.196.123.66) is configures with proxyarp, so nothing is changed on the pc''s from when they were not behind the firewall (i.e. they don''t have the firewall as gateway (and they each have different gateways, only 84.196.123.65

I have searched your FAQ''s and read the documentation on your site as well as googling. I am not able to figure this out. If you have any ideas can you please help. I am using the linux-ha failover with redundant firewalls. As part of the function of the linux-ha software consists a service called heartbeat which is a connection from each failover node through a serial cable or ethernet.

Good day to all. I don''t like to Post unless I am really stuck. Guess what? Redhat with Shorewall. Been using this for years. I have a new client that we have setup with Redhat and Shorewall. The problem is that his outside address (ETH0 = NET) is dynamic (i.e. DHCP enabled). All the rules work fine when we use a STATIC address on Eth0, so we know the rules, filters, tos etc work fine

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

Hi, I have a install of shorewall I have 2 interfaces(I think) ppp0[connection device] and eth0 [LAN device], I want to allow all traffic from the the internet in or aleast port 80 and CVS and webmin and mail and everything normal to the main machine with shorewall on it. I changed to policy file but it just gave me errors as to double interfaces. I also what still to alow connection sharing

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

I''m having a problem with the Shorewall firewall and CUPS printing interfering with each other. My Linux firewall machine is acting as both a CUPS server and client for all of my tests. Shorewall 2.0.13 CUPS 1.1.22-2 Linux kernel 2.6.9 CUPS was working fine to print to my Epson C84 (network connected via a Netgear PS101 print server using lpd://PS101.IP.address/raw ) until I

Can you post your Tinc configuration too? El lun., 30 ene. 2017 a las 11:42, Dave Albert (<dave.albert at gmail.com>) escribió: > Here is an extract of my current iptables that are not working: > > iptables -L -n -v > > Chain INPUT (policy DROP 8 packets, 1120 bytes) > pkts bytes target prot opt in out source > destination > 0 0

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

(If this is a double post, I apologize, my email client crashed when I first sent it) I need some help to configure a secure network on my Xen server. I have been looking online and it seems a I need a routed network. But I am having a terrible time implementing it. My setup: Xen 3.4.2 CentOS 5.5 Dom0 1 NIC (eth0) All guests will be HVM What I want to do is something similar to a firewall

Hi, Trying to figure out why I cannot get access to dell.com Their site is up because I can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer