similar to: hw question: asus dsbf-de sata ports?

(lspci-output added at the end of this mail!) Hi specialists, I''m trying to pass an HP Surestore USB-drive to a domU. I''m hiding the pci-device in the dom0, and capturing it in the domU. Although this works fine I receive the following lines in /var/log/syslog of the dom0 after a reboot ======================================================================= Aug 8

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3+deb7u1 Severity: important Dear Maintainer, We are having a problem on several Supermicro servers (I'll include more details on the configuration later) : when booting Linux 3.2 linux-image-3.2.0-4-amd64 (Wheezy) as a DOM0 on Xen 4.1 (xen-hypervisor-4.1-amd64 from Wheezy), the system hangs after : [ 3.716174] scsi1 : ata_piix [

Hi there, I''m running Xen 3.2.1-rc1-pre on a Ubuntu 8.0.4 server (kernel 2.6.24-19-xen). I have some network cards which are passed through to the DomUs. ''Normally'' everything works quite well. but sometimes when a DomU crashes or has to be shutdown, the pci interrupt of that DomU gets disabled in Dom0. After that happend there is no way (at least I haven''t

Dear folks, We are installing a large diskless cluster using CentOS 5.1. The hardware is pretty new - Supermicro X7DWT boards with Harpertown CPUs. Unfortunately we have some PXE-related problems described by the following scenario: 1) Set up DHCP, TFTP and NFS on a server, prepare PXE kernel and initrd - fine. 2) Start up the node using PXE for the first time - fine. 3) Reboot the node - PXE

Hi ,Guys I installed CentOS5.2-x86_64 on my Dell PowerEndger 1950 with virtualization component ,when reboot the system halted at: /////////////////////////////////////////////////////////// Red Hat nash version 5.1.19.6 usb 1-5: device not accepting address 4 ,error -110 usb 1-5: device not accepting address 5, error -110 usb 1-5: device not accepting address 6,error -110 usb 1-5: device not

I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. lines from /var/log/messages: > Oct 22 18:54:49 station2 kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2 > Oct 22 18:54:49 station2 kernel: usb 1-2: configuration #1 chosen from 1 choice > Oct 22 18:54:49 station2 kernel: scsi4 : SCSI emulation for USB Mass Storage

hi all . i am facing a issue with centos recently : after every boot i receive the following message in terminal : > Sep 19 13:13:02 station2 kernel: irq 50: nobody cared (try booting with the "irqpoll" option) > Sep 19 13:13:02 station2 kernel: [<c044e6fa>] __report_bad_irq +0x2b/0x69 > Sep 19 13:13:02 station2 kernel: [<c044e8e7>] note_interrupt +0x1af/0x1e8

Hello, I have an issue with my XEN system. I suspect that it might be a bug, but I''m no linux expert, so I don''t know. Here is my problem: I have an ASUS P7P55D-E Premium motherboard, and a Western Digital Caviar Black SATA-III 1TB hdd. I am trying to use AHCI. The dom0 is an Arch Linux. The dom0 boots fine until Intel VT-d is enabled in the BIOS. When I enable it Arch

On 10/02/2020 07:38 AM, H wrote: > On October 1, 2020 11:58:11 AM EDT, Bruce Ferrell <bferrell at baywinds.org> wrote: >> On 9/30/20 8:52 AM, H wrote: >>> 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset >> Family USB 3.0 xHCI Controller >> My system has these: >> >> 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series

I have a current RELENG_7 running on: http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm with the -3+ IPMI card. I can interact with the BIOS, etc, but no joy once we get past the loader. Anyone have ideas? Attached is the kernel config, and the /var/run/dmesg.boot file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683

On 9/30/20 8:52 AM, H wrote: > 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller My system has these: 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1d.0 USB controller: Intel Corporation 8

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

On 10/28/2017 02:55 PM, Gregory P. Ennis wrote: > Date: Sat, 28 Oct 2017 12:03:51 -0700 > > On 10/28/2017 11:30 AM, Gregory P. Ennis wrote: > > On each of these units I am using the video from the mother board > > which > > is : > > > > Base Board Information > > ?????????Manufacturer: ASUSTeK COMPUTER INC. > > ?????????Product Name: B150M-A/M.2

On October 1, 2020 11:58:11 AM EDT, Bruce Ferrell <bferrell at baywinds.org> wrote: >On 9/30/20 8:52 AM, H wrote: >> 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset >Family USB 3.0 xHCI Controller >My system has these: > >00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >Family USB xHCI (rev 05) >00:1a.0 USB controller: Intel

On Tue, Sep 4, 2018 at 2:43 PM, Mika Westerberg <mika.westerberg at linux.intel.com> wrote: > Yes, can you check if the failing device BAR is included in any of the > above entries? If not then it is probably not related. mtrr again for reference: reg00: base=0x0c0000000 ( 3072MB), size= 1024MB, count=1: uncachable reg01: base=0x0a0000000 ( 2560MB), size= 512MB, count=1: uncachable

First off, the current state of support for Maxwell (GM107/NV110) is not very useful to end-users. It's especially not useful if it's a 3d accelerator card without outputs (as yours appears to be), since acceleration is not supported in 3.15 out of the box. You'd have to figure out how to extract the context switching firmware from the blob driver and load it in nouveau. I'm told

On 10/28/2017 02:55 PM, Gregory P. Ennis wrote: > Date: Sat, 28 Oct 2017 12:03:51 -0700 > > On 10/28/2017 11:30 AM, Gregory P. Ennis wrote: > > On each of these units I am using the video from the mother board > > which > > is : > > > > Base Board Information > > ?????????Manufacturer: ASUSTeK COMPUTER INC. > > ?????????Product Name: B150M-A/M.2

Yes, you are right - the Intel-chip is connected to the display, it just offloads 3D work to do to the nVidia-chip, which isn't even to tell how to get the EDID. I just wanted to try it out, simply for two reasons: 1. I heard that nouveau now "supports" the chip, and since I got the hardware, I wanted to try it out - just for the fun of it. :) 2. As far as I am informed, a way to

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

Hello, guys. First apologize my flaws, I am not a native English speaker and thus am prone to stupid errors. My box is an ASUSTek Notebook with Optimus capability (no, this is NOT about Optimus, I don't try to use Optimus yet, so please don't switch off here) with a running Gentoo. The first GPU is an Haswell-based Intel chip, the second one is a nVidia GeForce GTX 850M, the chip is a