similar to: Creating LiveCD with EFI option? (Michael D. Setzer II)

Wondering what the best process would be to create livecds using the newer version of syslinux. Currently my G4L project has just been upgraded to syslinux 5.10 and works fine with regular 32 and 64 bit systems using the 32bit kernels, but have seen comments about EFI and somethings about 32bit only working with 32bit and 64bit with 64bit? Since I average about 1,000 downloads per week, I

I've been using various versions of syslinux as the boot loader for the g4l project that I have been the maintainer of since 2004. It was already using syslinux, so I've just updated it over the years, and currently have it use 5.10 version, but have done test builds with the 6.x versions. Recently had request from to users about EFI support, and one suggested that virtualbox has

Patrick, I think I've been able to figure out some missing details about your VMware Workstation tests. For a proxyDHCP, I'm using dnsmasq. Could you try to confirm your test was the same basic setup? On VMware Workstation 10 with a VMHWv10 VM set to EFI firmware for x64, I've been able to get mixed results, depending on if a gateway is provided. With a VMHWv9 VM, I see what appear

On 9 Jul 2014 at 6:01, Gene Cumm wrote: Date sent: Wed, 9 Jul 2014 06:01:22 -0400 Subject: Re: [syslinux] isohybrid binary not in 6.03-pre18? (utils bt is in bios/utils?) From: Gene Cumm <gene.cumm at gmail.com> To: "Michael D. Setzer, II" <mikes at kuentos.guam.net> Copies to: Syslinux at zytor.com > > On Jul 9, 2014 5:15 AM, "Michael D. Setzer II" >

Update. I renewed the dns for $16.67? Did the same last year, but it actually showed it was expired last year? This year it just stopped working and dig was showing it not expiring till next year? So, it seems to be back up. Don't have any control on site, but anyone with an account can renew it. Dear Customer, We are pleased to confirm that you have successfully renewed the following

I have dyndns.org account, so added the name below and mapped the IP address to it for now. Rather than having to remember the number. http://hdt-project.dyndns.org/ Not sure what the status is. On 5 May 2016 at 7:02, Pierre-Alexandre Meyer wrote: Date sent: Thu, 5 May 2016 07:02:51 -0400 Subject: Re: [syslinux] HDT site down?? From: Pierre-Alexandre Meyer <pierre at mouraf.org> To:

On Sun, Jun 7, 2015 at 5:09 PM, Patrick Masotta <masottaus at yahoo.com> wrote: >>>> > Patrick, I think I've been able to figure out some missing details > about your VMware Workstation tests. For a proxyDHCP, > I'm using dnsmasq. Could you try to confirm your test was the > same basic setup? > > On VMware Workstation 10 with a VMHWv10 VM set to

On Jul 9, 2014 6:11 AM, "Michael D. Setzer II" <mikes at kuentos.guam.net> wrote: > > On 9 Jul 2014 at 6:01, Gene Cumm wrote: > > Date sent: Wed, 9 Jul 2014 06:01:22 -0400 > Subject: Re: [syslinux] isohybrid binary not in 6.03-pre18? (utils bt is in bios/utils?) > From: Gene Cumm <gene.cumm at gmail.com> > To: "Michael D. Setzer,

Can you detail at what time does HDT locks ? The HDT iso does provides a verbose mode, It would be interesting to get when it locks. 2014-02-13 14:43 GMT+01:00 Michael D. Setzer II <mikes at kuentos.guam.net>: > I've got a user of my g4l project that is having a system that locks with > my > kernels, but also with hdt? The default versions are using the 5.10 > version of

I have a project g4l that uses syslinux and have been working on the next version. I installed the 3.74 pre5, and it worked just fine. But I was doing a test, and booted the systems, and usually pick the default kerenel or one of the other kernels on the CD before it times out with 60 seconds. But this time, I didn't do that. It loaded the default kernel with no problem, but then gives

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Was just working with the latest 3.54, and find that the Makefile in the menu directory didn't work until I added the /include/syslinux to the file. < CFLAGS = $(M32) -mregparm=3 -DREGPARM=3 -W -Wall - march=i386 -Os -fomit-frame-pointer -I$(LUDIR)/include - I$(COM32DIR)/include -I$(COM32DIR)/include/syslinux -Ilibmenu - D__COM32__ -

Just a quick update. The cat.c in the com32/modules directory works fine. Just added a printf("\nPress Enter to Return to Menu\n"); at the end since I had some uses display the messages, and then not release all they had to do was press enter to rerun the menu. The display.c32 still does work, but know it doesn't lock the system so only a hard reset works. Ctrl-Alt-Del works. I

When Kernel.org finally came back up, the boot directory and syslinux were there, and it was the same files as before from what I could tell, but now the boot directory is no longer there? Wondering why it was there, and now gone? +----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center

On 4 Apr 2016 at 8:06, H. Peter Anvin wrote: Subject: Re: [syslinux] hdt error on syslinux 6.0.4-pre1? To: "Michael D. Setzer II" <mikes at kuentos.guam.net>, syslinux at zytor.com From: "H. Peter Anvin" <hpa at zytor.com> Date sent: Mon, 4 Apr 2016 08:06:13 -0700 > On 04/04/16 07:14, Michael D. Setzer II via Syslinux

I sure did check the firewall and selinux as well. As an extreme testing major, they are both turned off. $ systemctl status firewalld firewalld.service - firewalld - dynamic firewall daemon ? ?Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled) ? ?Active: inactive (dead) sestatus? SELinux status: ? ? ? ? ? ? ? ? disabled Actually, now tftp transfers are denied $ tftp 127.0.0.1

I've got a user of my g4l project that is having a system that locks with my kernels, but also with hdt? The default versions are using the 5.10 version of syslinux, but build a special setup using 6.02 and it still locks with both the kernels and the hdt? He was able to get gparted i486 live iso to boot on the machine, so not clear what the issue might be. The system is a Fujitsu T734

Was seeing it I could get any closer with the efi boot using the 6.0.4, and didn't have any more luck. Did a test with it in bios mode and it works for the regular kernels, but when I tried the hdt.c32 I get the following error? Undef symbol FAIL: parse_url Failed to load COM32 file hdt.c32 Only find urlparce.c in the PXE directory, and no reference to it in any files in the hdt

I just upgraded the syslinux on my g4l v0.31 alpha 05 for testing, and it comes up to the syslinux (isolinux) from the boot cd fine. Then when I select the kernel, the screen scrolls with the following lines for many iterations, and then it seems to load the kernel and run OK. 9B3F 9469 A30B 2300 8A79 75A0 F000 followed by 9 "0000" .ERROR: idle with IF=0 I only checked it with the

I just downloaded the pre48 and ran make. It ran fine for everything, but ended with a number of errors related to the syslxcom program. Usually, I only see the messages about the windows build since I am doing the make on a Fedora 10 system. Is there something new that has been added that requires something that I am missing? From looking at the program this isn't related to the isolinux

Somewhat off-topic. I've noticed for some time, when one recompiles the syslinux, that it uses an id that is created by the gen-id.sh script that seems to be a hex string by making the id variable equal to the $tim variable. I had modified the script to append the the prexx of the directory to the $tim variable. Tested it with the pre15 and pre17 that came out today. The first one