similar to: Feature suggestion - USB Debug

Hello Geert Thanks for replying.. But i think i can?t use it, as i don?t reach the point where the debug module will be available.. it just pulls the lpxelinux.0 and tries to get the next download-- the ldlinux.c32 and it fails...and freezes. And the next step would be other modules i think.. if i?m wrong.. excuse me 8-).. yesterday i managed to get ipxelinux working from ipxe.org.. so the nic

On Wed, Jul 8, 2020 at 8:46 AM H <agents at meddatainc.com> wrote: > > I believe I mentioned that the UPS has the serial port, the computer thus > has USB. > > yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ? the former do NOT use the rx/tx data of the serial port at all, they ONLY use the serial port control signals, and they probably

On Wed, Jul 08, 2020 at 01:40:27PM -0500, Chris Adams wrote: > Once upon a time, John Pierce <jhn.pierce at gmail.com> said: > > yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ? the > > former do NOT use the rx/tx data of the serial port at all, they ONLY use > > the serial port control signals, and they probably will NOT work with a

Hello Gene, >>>They're flags to indicate the behavior of the UNDI interface. >>>Unfortunately, my first suspicion appears to be wrong. A flags value of 0x81b does not indicate that the UNDI interrupts should be used. So we/you or i am on a dead end to get it running or debugged ? is there hope to get it more debugged , with a special build or so ? someone wanting to port

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The

O.K Here we go: 8-) Pxelinux 4.10 4.10-pre22 Copyright ..... !PXE entry point found (we hope) at 9073:00F6 via plan A UNDI code segment at 9073 len 216A UNDI data segment at 9059 len 01A0 UNDI: baseio ec00 int 11 MTU 1500 type 1 "DIX+802.3" flags 0x81b Getting cached Packet 01 02 03 MY IP addr seems to be 172.31.126.10 UNDI : IRQ11(0x73):0a63:4f9b -> 0000:8de2 Mac: Addr: 80 ee 73

Hello! At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger). The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one). So i decided to try it with wine/darwine. Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch

Yes I do have Linux. I have assigned the ups.conf file as seen below.. [testups] Driver = usbhid-ups Port = /dev/ttyUSB0 When I try to start the ups driver I get the following error... $ sudo upsdrvctl start Network Ups Tools - UPS driver controller 2.7.1 Network Ups Tools - Generic HID driver 0.38 (2.7.1) USB communication driver 0.32 No matching HID UPS found Driver failed to start (exit

I've got a USB to serial adapter that I picked up from Radio Shack earlier this year. The updated pl2303 driver is already in the mainstream kernel as per https://bugzilla.redhat.com/show_bug.cgi?id=429652 but I'm not getting much traction from Red Hat as far as them updating the kernel. So every time there's an updated kernel, I have to rebuild the srpm. I figure that this is the

I have a USB to serial converter attached to my box. pl2303: Prolific PL2303 USB to serial adaptor driver if I login to the box and send/receive serial commands over this unit it works without error EVERY time. however, if I run the same command set from with-in the extensions.conf with System() I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed submitting read urb, error

On Sat, Oct 26, 2013 at 4:08 AM, Petry Roman, SHS-S IT-TS <Roman.Petry at shsservices.org> wrote: > Hello Geert > Thanks for replying.. But i think i can?t use it, as i don?t reach the point where the debug module will be available.. it just pulls the lpxelinux.0 and tries to get the next download-- the ldlinux.c32 and it fails...and freezes. You're right. Since you can't

Misters, Happy New Year to you. Let me introduce myself : Guillaume FORTAINE, Engineer in Computer Science. I am currently working on a Cloud Computing Firmware in an Infrastructure-as-a-Service context. The product is an UEFI Hypervisor. It puts virtualization exactly where it belongs: Into the firmware [0] Customers will be able to deploy their appliances and products directly to new

Misters, Happy New Year to you. Let me introduce myself : Guillaume FORTAINE, Engineer in Computer Science. I am currently working on a Cloud Computing Firmware in an Infrastructure-as-a-Service context. The product is an UEFI Hypervisor. It puts virtualization exactly where it belongs: Into the firmware [0] Customers will be able to deploy their appliances and products directly to new

Dear Rusers, I would like to color different sections of a histogram different colors. I have an example that was done by "brute force" given below. Has anyone implemented something like this in general? If not, any suggestions/pointers on how to write a general function to do so would be most appreciated. Alan-

Hello, after spending some time searching the mailing list and chatting via irc with some nice people i have to come to the list to ask for help. First thanks again to some IRC guys: genec for taking some time and to Ady2.. First some background. I need to boot a 250mb initrd to some(later all) of our thinclients , at the moment i?m using tftp but as we all know performance is bad. I

This patch series adds support for network buffering in the Remus codebase in libxl. Changes in V3: [1/5] Fix redundant checks in configure scripts (based on Ian Campbell''s suggestions) [2/5] Introduce locking in the script, during IFB setup. Add xenstore paths used by netbuf scripts to xenstore-paths.markdown [3/5] Hotplug scripts setup/teardown invocations are now

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

Hello, everyone - I have an old Windows app - a ship navigation program - that needs to see GPS input on a serial port (it was written in the pre-USB days.) My laptop, however, has no serial ports - but this same program, when run on a friend's Windows box, can read the GPS info from the USB-connected GPS via the "USB-Serial Driver". This is one of the frustrating bits of this

Estimados usuarios: Estoy intentando reproducir el ejemplo 6.4 de Thomas Lumley. Complex Survey. Editorial Wiley. 2010 (ver la página en google:

A few recent revisions will likely break your builds, since svn is having trouble with the deletion and then addition of $SHS/vop. If you have errors when updating, try removing $SHS/vop and then update again. Andrew