similar to: bug in syslinux 6.01 with gigabyte GA-P31-DS3L

Hello, I didn't try 6.02-pre15, I will do and I will post the results, my keyboard is a PS/2 model, the "legacy USB storage option" is enabled, I tried also an USB keyboard but there is no change, so it's not a keyboard problem, it probably something in syslinux ( ldlinux.sys ? ) who create a serious bug with my motherboard, I tried also with a USB HDD ( not a flash drive )

On Aug 2, 2013 3:45 AM, "Barto" <mister.freeman at laposte.net> wrote: > > Hello, > > I notice a bug in syslinux 6.01 ( bios version ) when I install it in a > USB flash drive ( FAT32 partition ) and when I want to boot this USB > flash drive with a gigabyte motherboard ( GA-P31-DS3L ), > > I setup my usb flash drive ( 4 Gb ) like this in windows XP : >

> Hello, > > I notice a bug in syslinux 6.01 ( bios version ) when I install it in a > USB flash drive ( FAT32 partition ) and when I want to boot this USB > flash drive with a gigabyte motherboard ( GA-P31-DS3L ), > > I setup my usb flash drive ( 4 Gb ) like this in windows XP : > > syslinux.exe -m -a -i -d /boot/syslinux H: > > then I create a syslinux.cfg

I have just tried the 6.02-pre15 version of syslinux and good news : the bug is fixed with this version, now I can boot without system freezes with my motherboard gigabyte GA-P31-DS3L Le 02/08/2013 11:53, Barto a ?crit : > Hello, > > I didn't try 6.02-pre15, I will do and I will post the results, >

[This email is either empty or too large to be displayed at this time]

To all.. I was using a Gigabyte motherboard, and the board seems like a bad choice. What do you guys recommend for a decent server board that would use a Dual Core processor and DDR2 ram. I dont want to replace the CPU and Mem i already have, just find a decent board that supportsthe existing.. Thanks, Ryan Nichols -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am having some difficulties installing centos 5.3 on the gigabyte GA-MA790FX-UD5P motherboard. Has anyone got centos booting on this motherboard? so far I have tried the following. + disabled the jmicron controller as this caused errors on booting JMB363 bad irq(0): will probe later error (this error caused the installation to stop at this point) + tested all components in another

Hi Gang! I've got this (now old) Gigabyte motherboard (GA-7N400 Pro2), I've had it for just over 3 years. I use it, so far, with only PATA devices. I'm toying with the idea of buying a matched pair of SATA drives and when I install Centos 5 (hopefully soon), building it with software raid (using the two drives as mirrors of each other). Now, I wouldn't have ever even thought of

In message <CAD0Rxe=p2gHHN9U3Zjn34Y71-KTxk5v+WzG7V3VH0ZNGCzqSvA at mail.gmail.com> Gene Cumm <gene.cumm at gmail.com> wrote: >On Fri, Jan 10, 2014 at 9:35 PM, Ronald F. Guilmette ><rfg at tristatelogic.com> wrote: >> In message <BLU0-SMTP145A44932CB6CC2DB4621568BB30 at phx.gbl>, >> Ady <ady-sf at hotmail.com> wrote: > >>>I don't know

Am 22.01.2014 09:27, schrieb Ronald F. Guilmette: > In message <BLU0-SMTP46982596DE9C2639CEB6B078BA40 at phx.gbl>, Ady wrote: > >> I am going to repeat what Genec requested at some point. Please post >> the result of (replace 'sdX' with the adequate device): >> >> 'fdisk -l -c=dos -u=cylinders/dev/sdX' >> and >> 'fdisk -l

Hi, I recently changed my motherboard to Gigabyte GA-7DPXDW+ and I can't get onboard AC97 sound to work. I added 'device pcm' to my kernel config file and sndstat returns FreeBSD Audio Driver (newpcm) Installed devices:", nothing ;( Any hints ? I'm running FreeBSD 4.8-STABLE

I have successfully created bootable USB flash drives containing the following bootable products: 1) Clonezilla (recent version) 2) Ultimate Boot CD (recent version) 3) OpenELEC (recent version) All of these apparently use SYSLINUX as part of the boot process. All three boot up just fine and with no problems at all on virtually all of the various systems that I have here at my

In message <BLU0-SMTP47F18ED7837B2CE7C672C88BBE0 at phx.gbl>, Ady <ady-sf at hotmail.com> wrote: >@Ronald, > >I have to admit I am a little bit frustrated. lol Join the club! I've invested hours and hours and hours on this little project, and all I have at the end is a board that _still_ has a brain damaged BIOS that won't boot things that everything else I own

> > In message <BLU0-SMTP1383C5798F6C577E5FFF368BA40 at phx.gbl>, > Ady <ady-sf at hotmail.com> wrote: > > >> With respect to all of the actually important stuff however, I may have > >> missed it all, but I don't recall having read or seen an explanation of > >> what Ady & everybody else finally figured out about all this... > >

In message <BLU0-SMTP145A44932CB6CC2DB4621568BB30 at phx.gbl>, Ady <ady-sf at hotmail.com> wrote: >> Is there something specific I should try? /boot/syslinux ? >> > >>From the syslinux boot prompt in UBCD you could try: >/boot/syslinux/config.c32 /boot/syslinux/syslinux.cfg /boot/syslinux/ > >(Yes, it is the same basic absolute path, three times, all

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

I've tried the pre version, also the today's pre15. Also not working. I've checked it with wireshark, here is the output: No. Time Source Destination Protocol Length Info 1 0.000000 192.168.3.13 192.168.3.1 TFTP 97 Read Request, File: rescue/dev-64/vmlinuz, Transfer type: octet, tsize\000=0\000,

> > It looks like Clonezilla and Ultimate Boot CD both prescribe > special installation procedures for USB stick. > isohybrids can be put onto stick just by e.g.: dd of=/dev/sdb > Make a backup of the stick if you later want to restore its > partitioning. > The (recent yet not latest) versions of Clonezilla that used Syslinux 5.xx will fail in some systems when writing

> >Are you willing to dd such image (*not* using Windows OS) and provide > >feedback? > > Yes. More broadly, I am willing to dd and try *any* image you might > ask me to try. > Hi Ronald, You posted in a recent email in this same email thread, about successfully booting an ArchLinux USB. Among several differences in comparison to your prior tests, you used a

> > Both sticks show very unusual factors for heads and sectors > > which are hardly intentional. If BIOS gets confused like fdisk, > > then the failure to find files is quite plausible. > > > > ------------------------------------------------------------- > > > > Could you please exercise what is described for Linux in > >