similar to: [PATCH v2 0/3] nouveau: support for custom VRAM domains

New revision of this patchset that prevents VRAM objects from being allocated on VRAM-less systems like Tegra. This is required for Mesa to work on such systems. Changes since v2: - Use vram_size to detect systems without VRAM and set the correct domain instead of expecting each chip to set its domain explicitly. Alexandre Courbot (2): nouveau: support for custom VRAM domains nvc0: use

This series is to allow NVIDIA chips with shared memory to operate more efficiently (and to operate at all once we disable VRAM from the kernel driver) by allowing nouveau_screen to specify a domain to use for objects originally allocated into VRAM. If the domain is not overridden, the default NOUVEAU_BO_VRAM is used. A NV_VRAM_DOMAIN() macro is then introduced to be used in place of

On Wed, Nov 19, 2014 at 12:41 AM, Alexandre Courbot <acourbot at nvidia.com> wrote: > Use the newly-introduced NV_VRAM_DOMAIN() macro to support alternative > VRAM domains for chips that do not use dedicated video memory. > > Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> > --- > src/gallium/drivers/nouveau/nouveau_buffer.c | 6 ++---- >

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at canonical.com> --- src/gallium/drivers/nouveau/nouveau_fence.c | 76 ++++++++++++------------- src/gallium/drivers/nouveau/nouveau_fence.h | 22 +++++-- src/gallium/drivers/nouveau/nouveau_screen.c | 9 +++ src/gallium/drivers/nouveau/nouveau_screen.h | 14 ++--- src/gallium/drivers/nouveau/nv30/nv30_context.c | 4 +-

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at canonical.com> --- src/gallium/drivers/nouveau/nouveau_fence.c | 76 ++++++++++++------------- src/gallium/drivers/nouveau/nouveau_fence.h | 22 +++++-- src/gallium/drivers/nouveau/nouveau_screen.c | 9 +++ src/gallium/drivers/nouveau/nouveau_screen.h | 14 ++--- src/gallium/drivers/nouveau/nv30/nv30_context.c | 4

This is enough to enable tessellation support on nvc0. It seems to work a lot better on my GF108 than GK208. I suspect that there's some sort of scheduling shenanigans that need to be adjusted for kepler+. Or perhaps some shader header things. Even with the GF108, I still get occasional blue triangles in Heaven, but I get a *ton* of them on the GK208 -- seemingly the same issue, but it's

Hello Alex, Op 19-11-14 om 06:41 schreef Alexandre Courbot: > Use the newly-introduced NV_VRAM_DOMAIN() macro to support alternative > VRAM domains for chips that do not use dedicated video memory. Should we construct a similar patch for NVAA/NVAC (MCP7x) as well? > > Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> > --- >

Use the newly-introduced NV_VRAM_DOMAIN() macro to support alternative VRAM domains for chips that do not use dedicated video memory. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- src/gallium/drivers/nouveau/nouveau_buffer.c | 6 ++---- src/gallium/drivers/nouveau/nv50/nv50_miptree.c | 4 ++-- src/gallium/drivers/nouveau/nvc0/nvc0_compute.c | 2 +-

This patch-series implements the ARB_viewport_array for nvc0 and does a little house-cleanig afterwords. V2: Add Release-Notes, mark this in GL3 as done for nvc0 Don't mark the scissors dirty when we don't need to do that Tobias Klausmann (3): nvc0: implement multiple viewports/scissors, enable ARB_viewport_array docs: update GL3.txt, relnotes: mark GL_ARB_viewport_array as done

This patch-series implements the ARB_viewport_array for nvc0 and does a little house-cleanig afterwords. Tobias Klausmann (3): nvc0: implement multiple viewports/scissors, enable ARB_viewport_array nvc0: mark scissor in nvc0_clear_{} nv50/ir: Remove NV50_SEMANTIC_VIEWPORTINDEX and its last consumer .../drivers/nouveau/codegen/nv50_ir_driver.h | 1 -

The headers hadn't been regenerated in a long time, and there were a few minor divergences. Among other things, rnndb has changed naming to G80/etc, for now I've not tackled switching that over and manually replaced the nvidia codenames back to the chip ids. However no other modifications of the headergen'd headers was done. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu>

If a transform feedback buffer's size is 0, st_bufferobj_data doesn't end up creating a buffer for it. There's no point in trying to write to such a buffer, so just pretend as if it's not really there. This fixes arb_gpu_shader5-xfb-streams-without-invocations on nvc0. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- src/mesa/state_tracker/st_cb_xformfb.c | 2 +- 1

On Mon, Oct 27, 2014 at 6:34 AM, Alexandre Courbot <acourbot at nvidia.com> wrote: > GK20A does not have dedicated VRAM, therefore allocating in VRAM can be > sub-optimal and sometimes even harmful. Set its VRAM domain to > NOUVEAU_BO_GART so all objects are allocated in system memory. > > Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> > --- >

Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- src/gallium/drivers/nouveau/nouveau_buffer.c | 4 +--- src/gallium/drivers/nouveau/nouveau_context.h | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/src/gallium/drivers/nouveau/nouveau_buffer.c b/src/gallium/drivers/nouveau/nouveau_buffer.c index e308ff4..904e2cc 100644 ---

From: Ben Skeggs <bskeggs at redhat.com> Signed-off-by: Ben Skeggs <bskeggs at redhat.com> --- configure.ac | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac index 4016871..c02ee61 100644 --- a/configure.ac +++ b/configure.ac @@ -73,7 +73,7 @@ LIBDRM_RADEON_REQUIRED=2.4.56 LIBDRM_AMDGPU_REQUIRED=2.4.63 LIBDRM_INTEL_REQUIRED=2.4.61

I went through the gallium-nine tree and picked out nouveau patches that are general bug-fixes. The first bunch I'd like to also get into 10.2. I've reviewed all of them and they make sense to me, but sending them out for public review as well in case there are any objections. Unless I hear objections, I'd like to push this by Friday. Christoph Bumiller (11): nv50,nvc0: always pull

As it turns out, with the proprietary firmware, the VP3 and VP4 interfaces are identical. Furthermore, this is all already implemented for nvc0. So these patches (a) move the easily sharable bits of the nvc0 implementation into the nouveau directory, and then (b) implement the other parts in nv50. The non-shared parts are still largely copies, but there are some differences, not the least of which

From: Ben Skeggs <bskeggs at redhat.com> v2. forgot bump for non-gallium driver Signed-off-by: Ben Skeggs <bskeggs at redhat.com> --- configure.ac | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configure.ac b/configure.ac index b6680d0..965c6f7 100644 --- a/configure.ac +++ b/configure.ac @@ -72,8 +72,8 @@ LIBDRM_REQUIRED=2.4.60

Can you push this to a repo somewhere? I want to see what the final version looks like after all your changes, but it's hard to see that with these patches. On Mon, Feb 15, 2016 at 12:38 AM, Ben Skeggs <skeggsb at gmail.com> wrote: > From: Ben Skeggs <bskeggs at redhat.com> > > Adds support for the new TIC layout that's present on Maxwell GPUs, > heavily based on

From: Ben Skeggs <bskeggs at redhat.com> Signed-off-by: Ben Skeggs <bskeggs at redhat.com> --- src/gallium/drivers/nouveau/nv50/g80_defs.xml.h | 279 ++++++++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 src/gallium/drivers/nouveau/nv50/g80_defs.xml.h diff --git a/src/gallium/drivers/nouveau/nv50/g80_defs.xml.h