similar to: RESEND 8/8: DDR2 MR generation

Patch 1 and 2 implement wait-for-vblank, required to remove flicker when reclocking memory Patch 3 and 4 allow me to do things between waiting for VBLANK and disabling FB, like pause PFIFO and wait for the engines to idle. This minimises the time PFIFO is paused, thus maximises performance. The rest of the patches speak for themselves. As the actual memory reclocking script is still somewhat prone

V2: Always disable DLL reset Signed-off-by: Roy Spliet <rspliet at eclipso.eu> --- drivers/gpu/drm/nouveau/Makefile | 1 + drivers/gpu/drm/nouveau/core/subdev/fb/priv.h | 1 + drivers/gpu/drm/nouveau/core/subdev/fb/sddr2.c | 96 ++++++++++++++++++++++++++ 3 files changed, 98 insertions(+) create mode 100644 drivers/gpu/drm/nouveau/core/subdev/fb/sddr2.c diff --git

Following a series of patches that implement memory reclocking for NVA3/5/8 with DDR2, DDR3 and GDDR3 on board. I tested these patches on 6 different graphics cards, but I expect reclocking now to work on many more. Testers can pick up these patches and test it by enabling pstate (nouveau.pstate=1). They should then be able to change clocks by writing to /sys/class/drm/card0/device/pstate. Correct

Signed-off-by: Roy Spliet <rspliet at eclipso.eu> --- drivers/gpu/drm/nouveau/Makefile | 1 + drivers/gpu/drm/nouveau/core/subdev/fb/gddr3.c | 117 +++++++++++++++++++++++++ drivers/gpu/drm/nouveau/core/subdev/fb/priv.h | 1 + 3 files changed, 119 insertions(+) create mode 100644 drivers/gpu/drm/nouveau/core/subdev/fb/gddr3.c diff --git

Adds reclocking for NVA0, and a whole lot of work for other cards. Had these patches collecting dust for a little, but tested them with both my NVA0, and Martin's a while back. Success not guaranteed, but should be quite a leap forward. Happy reviewing and testing. Cheers, Roy

In bulletpoints: - Add some support for G94 and G96 reclocking. Has been tested on literally two cards, which is hardly adequate as "full coverage". On the other hand, the changes were small enough to make me confident this might work for others as well. - Fix NV50 wait for VBLANK when no monitor is plugged in. - Voltage related inprovements for GT21x. - Slightly improve Keplers

Signed-off-by: Roy Spliet <rspliet at eclipso.eu> --- drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/ramcfg.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/bios/rammap.c | 3 ++- drivers/gpu/drm/nouveau/nvkm/subdev/bios/timing.c | 2 ++ drivers/gpu/drm/nouveau/nvkm/subdev/fb/gddr3.c | 6 ++++-- 4 files changed, 9 insertions(+), 3 deletions(-) diff --git

Patch 1 fixes nva3 bailing due to not finding the right ramcfg Patch 2 is a resend rebased on 3.17.0-rc4 for setting the vblank period Patch 3-5 handle writes to per-partition registers, for which NVA3 does not have special broadcast regs available. Patch 6 removes local structs from NVA3 reclocking in favour of the already existing "ram->base." variables, like in NVE0 As always,

We get 2 warnings when building kernel with W=1: drivers/gpu/drm/nouveau/nvkm/core/firmware.c:34:1: warning: no previous prototype for 'nvkm_firmware_get' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/core/firmware.c:58:1: warning: no previous prototype for 'nvkm_firmware_put' [-Wmissing-prototypes] In fact, these functions are declared in

Hello, Attached a small patch that correctly identifies the DLLoff bit for >=GF100. Marked RFC because I haven't seen any GDDR5 samples that *enable* the DLL. I'd like to verify whether the DLL should be reset when enabled. Could increase likelihood of succesfull reclock. Ben: could you do some experiments with this bit to see if GDDR5 needs some DLL reset logic? Thanks, and happy

Fix typo introduced when converting to core infrastructure. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin at mentor.com> --- drivers/gpu/drm/nouveau/core/subdev/bios/i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/i2c.c b/drivers/gpu/drm/nouveau/core/subdev/bios/i2c.c index 5fcce5d..ad577db 100644 ---

We get a few warnings when building kernel with W=1: drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr2.c:60:1: warning: no previous prototype for 'nvkm_sddr2_calc' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr3.c:69:1: warning: no previous prototype for 'nvkm_sddr3_calc' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/subdev/volt/gpio.c:35:1: warning: no

Am Samstag, den 01.02.2014, 12:16 +0900 schrieb Alexandre Courbot: > Add a clumsy-but-working FB support for GK20A. This chip only uses system > memory, so we allocate a big chunk using CMA and let the existing memory > managers work on it. > > A better future design would be to allocate objects directly from system > memory without having to suffer from the limitations of a

Am Samstag, den 01.02.2014, 18:28 -0500 schrieb Ilia Mirkin: > On Sat, Feb 1, 2014 at 8:40 AM, Lucas Stach <dev at lynxeye.de> wrote: > > Am Samstag, den 01.02.2014, 12:16 +0900 schrieb Alexandre Courbot: > >> Add a clumsy-but-working FB support for GK20A. This chip only uses system > >> memory, so we allocate a big chunk using CMA and let the existing memory >

On Wed, Dec 10, 2014 at 5:53 PM, Pierre Moreau <pierre.morrow at free.fr> wrote: > (This is a v3 of patch "drm/nouveau/fb/nv50: Add PFB writes") > > This fix a GPU lockup on 9400M (NVAC) when using acceleration, see > https://bugs.freedesktop.org/show_bug.cgi?id=27501 > > v2: > - Move code to subdev/fb/nv50.c as suggested by Roy Spliet; > - Remove arbitrary

[PATCH 4/8] HVM save restore: vcpu context support Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> save/restore HVM vcpu context such as vmcs diff -r ee20d1905bde xen/arch/x86/domain.c --- a/xen/arch/x86/domain.c Thu Jan 11 16:40:55 2007 +0800 +++ b/xen/arch/x86/domain.c Thu Jan 11 16:46:59 2007 +0800 @@ -573,6 +573,7 @@ int arch_set_info_guest( else {

We get a few warnings when building kernel with W=1: drivers/gpu/drm/nouveau/nvkm/core/firmware.c:34:1: warning: no previous prototype for 'nvkm_firmware_get' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/core/firmware.c:58:1: warning: no previous prototype for 'nvkm_firmware_put' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr3.c:69:1: warning: no previous

It's my megabyte, I want to use it! At this point in init vbios is copied over already, so there's no reason it cannot used to hold other data now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst at canonical.com> --- diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnvc0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnvc0.c index cf97c4d..507d35d 100644 ---

We get some warnings when building kernel with W=1: drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf117.c:222:1: warning: no previous prototype for 'gf117_grctx_generate_main' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxnv50.c:255:1: warning: no previous prototype for 'nv50_grctx_fill' [-Wmissing-prototypes] drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxnv50.c:265:1:

From: Martin Peres <martin.peres at labri.fr> This should fix a deadlock that has been reported to us where fan_update() would hold the fan lock and try to grab the alarm_program_lock to reschedule an update. On an other CPU, the alarm_program_lock would have been taken before calling fan_update(), leading to a deadlock. We should Cc: <stable at vger.kernel.org> # 3.9+ Reported-by: