similar to: [PATCH] gk20a: add LTC device

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. This version is mostly identical to v2 but fixes an important issue: the drvdata must be set to the drm_device for sysfs to work, so the platform device structure now includes the

Hi, This series includes some pieces of fixes to complete the GK20A power on/off sequences and add the suspend/resume support. The patches 1/11 - 4/11 are based on the linux-next-20141219. The patches 5/11 - 11/11 are based on the branch "linux-3.19" of Ben Skeggs's tree (http://cgit.freedesktop.org/~darktama/nouveau). Thanks, Vince Vince Hsu (4): (linux-next-20141219) ARM:

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. Thanks to the input received for v1, this version is more self-contained and shares less stuff between nouveau_drm and nouveau_platform. The major change is that nouveau_platform is now

nvkm_mm_fini() was not called when exiting the driver, resulting in a memory leak. Fix this. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- drm/nouveau/nouveau_platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drm/nouveau/nouveau_platform.c b/drm/nouveau/nouveau_platform.c index 3691982452a9..f83aa12ee5c6 100644 --- a/drm/nouveau/nouveau_platform.c +++

This patch series is the final (?) step towards the initial support of GK20A, allowing it to be probed and used (currently at a very slow speed, and for offscreen rendering only) on the Jetson TK1 and Venice 2 boards. The main piece if the first patch which adds platform devices probing support to Nouveau. There are probably lots of things that need to be discussed about it, e.g.: * The way the

nouveau_platform.c was still using the old nouveau_dev() macro, triggering a compilation error. Fix this. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- Hi Ben, This one should probably go for 3.17 as Linus' tree currently does not compile if NOUVEAU_PLATFORM is selected. :( drm/nouveau_platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git

Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> Acked-by: Alexandre Courbot <acourbot at nvidia.com> Acked-by: Thierry Reding <treding

On Tue, Dec 23, 2014 at 5:40 AM, Vince Hsu <vinceh at nvidia.com> wrote: > This is a workaround to avoid the instmem backup/restore during the suspend > and resume process in nv50 instemem driver. > > Signed-off-by: Vince Hsu <vinceh at nvidia.com> > --- > drm/Kbuild | 1 + > nvkm/engine/device/nve0.c | 2 +- >

op 26-06-14 07:33, Alexandre Courbot schreef: > Add a platform driver for Nouveau devices declared using the device tree > or platform data. This driver currently supports GK20A on Tegra > platforms and is only compiled for these platforms if Nouveau is > enabled. > > Nouveau will probe the chip type itself using the BOOT0 register, so all > this driver really needs to do is

A series I have waited too long to submit, and the recent refactoring made me pay the price of my perfectionism, so here are the features that are at least completed Patches 1-3 make the presence of a RAM device optional, and remove GK20A's dummy RAM driver we were using so far. On chips using shared memory, such a device can confuse the driver into moving objects where there is no need to,

Changes since v3: - Use a single dma_attr for all DMA-API allocations in instmem instead of one per allocation - Use device.info.ram_size instead of pfb->ram to check whether VRAM is present outside of nvkm Changes since v2: - Cleaner changes for ltc - Fixed typos in gk20a instmem IOMMU comments Changes since v1: - Add missing else condition in ltc - Remove extra flags that slipped into

Hi, Generally the the imported buffers which has memory type TTM_PL_TT are mapped as small pages probably due to lack of big page allocation. But the platform device which also use memory type TTM_PL_TT, like GK20A, can *allocate* big page though the IOMMU hardware inside the SoC. This is a try to map the imported buffers as big pages in GMMU by the platform IOMMU. With some preparation work to

Thanks Ilia for the v2 review! Here is the v3 of this IOMMU support for GK20A series. Changes since v2: - Cleaner changes for ltc - Fixed typos in gk20a instmem IOMMU comments Changes since v1: - Add missing else condition in ltc - Remove extra flags that slipped into nouveau_display.c and nv84_fence.c. Original cover letter: Patches 1-3 make the presence of a RAM device optional, and remove

Changes since v1: - Add missing else condition in ltc - Remove extra flags that slipped into nouveau_display.c and nv84_fence.c. Original cover letter: Patches 1-3 make the presence of a RAM device optional, and remove GK20A's dummy RAM driver we were using so far. On chips using shared memory, such a device can confuse the driver into moving objects where there is no need to, and can trick

Some Tegra drivers might be complied as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> --- v2: add more description why we need this patch drivers/soc/tegra/fuse/fuse-tegra.c | 1

Add a platform driver for Nouveau devices declared using the device tree or platform data. This driver currently supports GK20A on Tegra platforms and is only compiled for these platforms if Nouveau is enabled. Nouveau will probe the chip type itself using the BOOT0 register, so all this driver really needs to do is to make sure the module is powered and its clocks active before calling

Signed-off-by: Vince Hsu <vinceh at nvidia.com> --- nvkm/subdev/volt/base.c | 67 ++++++++++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 29 deletions(-) diff --git a/nvkm/subdev/volt/base.c b/nvkm/subdev/volt/base.c index 32794a999106..26ccd8df193f 100644 --- a/nvkm/subdev/volt/base.c +++ b/nvkm/subdev/volt/base.c @@ -101,6 +101,41 @@ nouveau_volt_set_id(struct

Hello Vince, One minor question inline. Op 28-11-14 om 12:13 schreef Vince Hsu: > The voltage value are calculated by the hardware characterized > result. > > Signed-off-by: Vince Hsu <vinceh at nvidia.com> > --- > > Resend this patch with the fuse change and proper patch prefix > per Thierry's request. > > drm/Kbuild | 1 + >

Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> Acked-by: Alexandre Courbot <acourbot at nvidia.com> Acked-by: Thierry Reding <treding

This series adds support for reclocking on GK20A. The first two patches touch the clock subsystem to allow GK20A to operate, by making the presence of the thermal and voltage devices optional, and allowing pstates to be provided directly instead of being probed using the BIOS (which Tegra does not have). The last patch adds the GK20A clock device. Arguably the clock can be seen as a stripped-down