similar to: [PATCH v3 0/9] drm/nouveau: support for GK20A, cont'd

Latest patches for GK20A, taking comments received for v3 into account. Changes since v3: - use only pfn_to_page() and page_to_pfn() in GK20A's FB. These functions are present on every arch and the physical address to page frame number conversion is also consistently a shift of PAGE_SHIFT. This part will probably be replaced by something nicer in the future anyway. - fixed a warning on

Hi everyone, Way overdue v2 of the final patches that enable basic GK20A support. Hopefully all the issues raised with v1 have been addressed. Changes since v1: - Use gk20a clock driver by Ben instead of twiddling nv04's - Name new classes after gk20a instead of nvea - Addressed comments about BAR initialization code factorization - Removed non-essential code which only purpose was to avoid

Hi everyone, Here is the second batch of patches to add GK20A support to Nouveau. This time we are adding the actual chip support, and this series brings the driver to a point where a slightly-tweaked Mesa successfully runs shaders and renders triangles on GBM! Many thanks to Thierry Reding and the people on the #nouveau IRC channel for their help without which we would not have reached this

Hello everyone, GK20A is the Kepler-based GPU used in the upcoming Tegra K1 chips. The following patches perform architectural changes to Nouveau that are necessary to support non-PCI GPUs and add initial support for GK20A. Although the support is still very basic and more user-space changes will be needed to make the full graphics stack run on top of it, we were able to successfully open

Some BARs (like GK20A's) do not support being ioremapped write-combined. Add a boolean property to the BAR structure and handle that case in the Nouveau BO implementation. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- drivers/gpu/drm/nouveau/core/include/subdev/bar.h | 3 +++ drivers/gpu/drm/nouveau/nouveau_bo.c | 17 ++++++++++++----- 2 files changed, 15

On 6/27/14 8:56 PM, "Ben Skeggs" <skeggsb at gmail.com> wrote: >On Sat, Jun 28, 2014 at 4:51 AM, Ken Adams <KAdams at nvidia.com> wrote: >> quick note re: tegra and gpu bars... >> >> to this point we've explicitly avoided providing user-mode mappings due >>to >> power management issues, etc. >> looks to me like this would allow such

Hi, This is a try to have some simple DVFS (Dynamic Voltage and Frequency Scaling) support for GK20A. Instead of relying on other existing frequency scaling framework, we create a simple subdev in Nouveau for the same purpose. That's because we don't want to make the DVFS implementation for GK20A far more than enough in the beginning and hinder the implementation for dGPU in the future.

On Thu, Dec 18, 2014 at 8:13 PM, Vince Hsu <vinceh at nvidia.com> wrote: > Hello Ben, > > On 12/18/2014 05:34 PM, Ben Skeggs wrote: >> >> On Thu, Dec 18, 2014 at 4:28 PM, Vince Hsu <vinceh at nvidia.com> wrote: >>> >>> This patch creates a subdev for DVFS (Dynamic Voltage and Frequency >>> Scaling) >>> support in Nouveau. This

Second version of the gk20a clock patches. I have tried to keep the therm and volt devices mandatory in the clock driver, but unfortunately they are too tied to bios to allow this, at least for the moment. Consequently this version is mostly a port of the first version to Ben's tree. Ben, please let me know what I have done wrong in terms of integration to your tree, as the main purpose of

On Thu, Dec 18, 2014 at 4:28 PM, Vince Hsu <vinceh at nvidia.com> wrote: > This patch creates a subdev for DVFS (Dynamic Voltage and Frequency Scaling) > support in Nouveau. This subdev refers to the status information provided by > the NVIDIA hardware and tries to adjust the performance level based on the > calculated target. Only the GK20A is supported right now. Hey Vince,

This series adds support for reclocking on GK20A. The first two patches touch the clock subsystem to allow GK20A to operate, by making the presence of the thermal and voltage devices optional, and allowing pstates to be provided directly instead of being probed using the BIOS (which Tegra does not have). The last patch adds the GK20A clock device. Arguably the clock can be seen as a stripped-down

There might be some callers of nouveau_clock_astate(), and they are from inetrrupt context. So we must ensure that this function can be atomic in that condition. This patch adds one parameter which is subsequently passed to nouveau_pstate_calc(). Therefore we can choose whether we want to wait for the pstate work's completion or not. Signed-off-by: Vince Hsu <vinceh at nvidia.com> ---

Some Tegra drivers might be complied as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> --- v2: add more description why we need this patch drivers/soc/tegra/fuse/fuse-tegra.c | 1

We will use this subdev to disable temperature reading on cards that did not get a sensor calibration in the factory. Signed-off-by: Martin Peres <martin.peres at free.fr> --- configure.ac | 1 + drm/Kbuild | 4 ++ drm/core/include/subdev/fuse.h | 1 + drm/core/subdev/fuse/base.c | 1 + drm/core/subdev/fuse/g80.c | 1 +

Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> Acked-by: Alexandre Courbot <acourbot at nvidia.com> Acked-by: Thierry Reding <treding

Some very trivial comments below: On Fri, Jan 31, 2014 at 10:16 PM, Alexandre Courbot <acourbot at nvidia.com> wrote: > Add support for initializing the priv ring of GK20A. This is done by the > BIOS on desktop GPUs, but needs to be done by hand on Tegra. > > Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> > --- > drivers/gpu/drm/nouveau/Makefile

On Tue, Dec 23, 2014 at 5:40 AM, Vince Hsu <vinceh at nvidia.com> wrote: > This is a workaround to avoid the instmem backup/restore during the suspend > and resume process in nv50 instemem driver. > > Signed-off-by: Vince Hsu <vinceh at nvidia.com> > --- > drm/Kbuild | 1 + > nvkm/engine/device/nve0.c | 2 +- >

Commit "ltc/gf100-: fix cbc issues on certain boards" moved the setting of the large page size bit from bar/nvc0 to fb/nvc0. GK20A uses its own FB device and the change was thus not applied to it - fix this. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- nvkm/subdev/fb/gk20a.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git

Signed-off-by: Vince Hsu <vinceh at nvidia.com> --- nvkm/subdev/volt/base.c | 67 ++++++++++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 29 deletions(-) diff --git a/nvkm/subdev/volt/base.c b/nvkm/subdev/volt/base.c index 32794a999106..26ccd8df193f 100644 --- a/nvkm/subdev/volt/base.c +++ b/nvkm/subdev/volt/base.c @@ -101,6 +101,41 @@ nouveau_volt_set_id(struct

Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> Acked-by: Alexandre Courbot <acourbot at nvidia.com> Acked-by: Thierry Reding <treding