similar to: Volume can not write to data if this volume quota limits capacity and mount itself volume on arm64（aarch64） architecture

Hi When using cut'n paste in word on a 2MB document with different formattings, the paste takes 3 seconds to appear. Tried samba 2.2.8 3.0.1 3.0.2, used different options in speed.txt. Nothing helps. The problem doesn't exsist on a 50KB document, or if i convert the 2MB document to older word 6.0(its size increase to 10MB). Server is SunFire 280R,Antares Quad Gigabit ethernet, Solaris 9.

On Fri, Dec 1, 2017 at 1:55 AM, Ziemowit Pierzycki <ziemowit at pierzycki.com> wrote: > Hi, > > I have a problem joining four Gluster 3.10 nodes to an existing > Gluster 3.8 nodes. My understanding that this should work and not be > too much of a problem. > > Peer robe is successful but the node is rejected: > > gluster> peer detach elkpinfglt07 > peer

Hi, I have a problem joining four Gluster 3.10 nodes to an existing Gluster 3.8 nodes. My understanding that this should work and not be too much of a problem. Peer robe is successful but the node is rejected: gluster> peer detach elkpinfglt07 peer detach: success gluster> peer probe elkpinfglt07 peer probe: success. gluster> peer status Number of Peers: 6 Hostname: elkpinfglt02

Dear all, (please Cc) I am running latest kernel (3.17-rc6) and I see corruption of an usb3.0 device usb stick. Strange errors, impossibility to mount. Repeated unplugging and replugging helps sometimes, in all cases recovery is necessary. Is this a know problem, a problem of my system Debian/sid, uptodate, self-compiled kernel of the suspend program (that initiates the suspend), the usb

Hi Alan, thanks for your answer. > I do not recognize this problem based on your description. Please post > the dmesg log. Here cleaned output of journalctl, removed mainly networkmanager stuff. This is about a wake up after sleep, where before the stick was ok. More details necessary, let me know. Thanks Norbert

Hi All, I'm using gluster as dispersed volume and I send to ask for very serious thing. I have 3 servers and there are 9 bricks. My volume is like below. ------------------------------------------------------ Volume Name: TEST_VOL Type: Disperse Volume ID: be52b68d-ae83-46e3-9527-0e536b867bcc Status: Started Snapshot Count: 0 Number of Bricks: 1 x (6 + 3) = 9 Transport-type: tcp Bricks:

Did you do gluster peer probe? Check out the documentation: http://docs.gluster.org/en/latest/Administrator%20Guide/Storage%20Pools/ On Tue, Feb 6, 2018 at 5:01 PM, Ercan Aydo?an <ercan.aydogan at gmail.com> wrote: > Hello, > > i installed glusterfs 3.11.3 version 3 nodes ubuntu 16.04 machine. All > machines have same /etc/hosts. > > node1 hostname > pri.ostechnix.lan

Hi Alan, sorry for the journalctl output. I have now done the following:L * boot into 3.17-rc7 * mount the usb stick (recovery completed) * unmount, mount, unmount - just to be sure all is fine * started usbmon capturing on bus 3 * mount the usb stick * suspend to ram * wake up now the stick is "officially" mounted (/proc/mounts) * umount error messages pop up * try to mount more

hi All, There is a distributed cluster with 5 bricks: gl0 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.1T 1.5T 75% /mnt/brick1 gl1 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.3T 1.3T 78% /mnt/brick1 gl2 Filesystem Size Used Avail Use% Mounted on /dev/sda4 5.5T 4.1T 1.4T 76% /mnt/brick1 gl3 Filesystem Size Used

I changed /etc/hosts 127.0.0.1 pri.ostechnix.lan pri 51.15.90.60 sec.ostechnix.lan sec 163.172.151.120 third.ostechnix.lan third on every node matching hostname to 127.0.0.1 then root at pri:~# apt-get purge glusterfs-server root at pri:~# rm -rf /var/lib/glusterd/ root at pri:~# rm -rf /var/log/glusterfs/ root at pri:~# apt-get install glusterfs-server root at pri:~#

Op 2013-07-12 om 14:06 schreef syslinux-owner at zytor.com: > Reason: Message body is too big: 1780404 bytes with a limit of 512 KB So previous not on the mailinglist. > Date: Fri, 12 Jul 2013 23:05:05 +0200 (CEST) > From: Michael Szerencsits <szerencsits.michael at gmx.at> > To: syslinux at zytor.com > Subject: efi64 boot fail during download from kernel and initrd

Hello, So I'm seeing a rejected peer with 3.12.6. This is with a replica 3 volume. It actually began as the same problem with a different peer. I noticed with (call it) gluster-2, when I couldn't make a new volume. I compared /var/lib/glusterd between them, and found that somehow the options in one of the vols differed. (I suspect this was due to attempting to create the volume via the

Using the host name of the volume, its related gluster commands can become very slow .For example,create,start,stop volume,nfs related commands. and some time And in some cases, the command will return Error : Request timed out but If using ip address to create the volume. The volume all gluster commands are normal. I have configured /etc/hosts correctly,Because,SSH can normally use the

Hello, i installed glusterfs 3.11.3 version 3 nodes ubuntu 16.04 machine. All machines have same /etc/hosts. node1 hostname pri.ostechnix.lan node2 hostname sec.ostechnix.lan node2 hostname third.ostechnix.lan 51.15.77.14 pri.ostechnix.lan pri 51.15.90.60 sec.ostechnix.lan sec 163.172.151.120 third.ostechnix.lan third volume create command is root at

On Tue, Mar 6, 2018 at 6:00 AM, Jamie Lawrence <jlawrence at squaretrade.com> wrote: > Hello, > > So I'm seeing a rejected peer with 3.12.6. This is with a replica 3 volume. > > It actually began as the same problem with a different peer. I noticed > with (call it) gluster-2, when I couldn't make a new volume. I compared > /var/lib/glusterd between them, and

On Mon, Jan 15, 2018 at 6:30 PM, ?? <chenxi at shudun.com> wrote: > Using the host name of the volume, its related gluster commands can become > very slow .For example,create,start,stop volume,nfs related commands. and > some time And in some cases, the command will return Error : Request timed > out > but If using ip address to create the volume. The volume all gluster >

I'm guessing there's something wrong w.r.t address resolution on node 1. >From the logs it's quite clear to me that node 1 is unable to resolve the address configured in /etc/hosts where as the other nodes do. Could you paste the gluster peer status output from all the nodes? Also can you please check if you're able to ping "pri.ostechnix.lan" from node1 only? Does

Hi All, I am from the packaging team in RBS. We use R DCOMServer Manager 2.0, this application uses RGUI 2.3.0 as one of its components. We are planning to upgrade to the latest version of RGUI 2.8.0 but found that R DCOMServer manager is not compatible with the latest version. Can you direct me from where can I download the compatible version of DCON server Manager? Thanks, Smita Kumar RBS

On Sat, 27 Sep 2014, Norbert Preining wrote: > Dear all, > > (please Cc) > > I am running latest kernel (3.17-rc6) and I see corruption of an usb3.0 > device usb stick. Strange errors, impossibility to mount. > > Repeated unplugging and replugging helps sometimes, in all cases > recovery is necessary. > > Is this a know problem, a problem of my system >

On Sun, 28 Sep 2014, Norbert Preining wrote: > Hi Alan, > > thanks for your answer. > > > I do not recognize this problem based on your description. Please post > > the dmesg log. > > Here cleaned output of journalctl, removed mainly networkmanager stuff. I would have preferred to see the output from dmesg, as I requested. But never mind, there probably