similar to: using a USB HID device with WINE?

Hi all I got a usb 2-2.4: Product: Logitech Freedom 2.4 input: Logitech Logitech Freedom 2.4 as /class/input/input4 input: USB HID v1.10 Joystick [Logitech Logitech Freedom 2.4] on usb-0000:00:02.1-2.4 joystick. In linux native games (e.g. targetware ) all 4 axis x,y,rudder,throttle and POV are recognized. KDE calibrator also sees all axis and buttons properly Wine only sees 2 axis (it does

This is a continuation/evolution of what I've been trying to do, get some response from my controller(s) in Guitar Hero 3. I compiled wine (with some help :) and manually copied the dinput_test.exe.so file into my /usr/lib32/wine directory and made it's permissions match the other exe.so files (644). I then run the test to see if dinput is seeing/reacting to my controller, and it seems

Hi Greg, I haven’t but I will give that a shot later this week and advise. Thanks for the tip. Thank you, David Zomaya Technical Support [cid:image007.png at 01D525AF.B38D63F0] 1111 W. 35th Street | Chicago, IL 60609 USA 773.869.1156 | david_zomaya at tripplite.com [cid:image008.png at 01D525AF.B38D63F0]<http://www.tripplite.com/> From: Nut-upsuser

I am trying to use a Guillemot gamepad with PES6 but the buttons are not recognized. In kubuntu system settings I can see my pad, callibrate the joysticks and see the buttons are recognized, but not inside wine (only the joysticks are recognized). I have tried different combinations for the DirectInput entry in the registry but either I have not stumbled upon the correct one or there is another

Hi again, I've succeeded in compiling the svn trunk with the automake tools and wish to say thank you to Charles Lepple for his help. After fixing some parameters in the hotplug script I can now get access to the UPS on /dev/usb/hiddev0 (I added productid and vendorid of my ups to the usermap). I've decided to try the newhidups driver with -x generic parameter and got this response :

Greets all; I was just booted to mdv-2010-x64 where I found my lack of sound problems. Whoopy ding... But when I rebooted to fedora, now the driver cannot disconnect and gain access to the ups. I installed the 52-nut udev file in /etc/udev.d, and it reads that it should setup /dev/hiddev0 like this and with 0664 perms when it finds that ups: crw-rw-r-- 1 root nut 180, 0 2010-01-03 20:51

Hi I recently got my PS3 sixaxis working and its under /dev/input/js1. I am now running ubuntu hardy. It doesn't operate in wine games etc so I need to edit the registry using <joystick name> = <axes mapping> in "directinput" In http://wiki.winehq.org/UsefulRegistryKeys it says to use the command: Code: WINEDEBUG=+dinput wine program.exe 2>&1 | grep

Dear wine user group I removed the whole installation under the root path and reinstalled the application to the user directory -thanks to mr. vitamin. But the effect is the same - the usb interface has not be enabled although the driver works correctly, see jstest /dev/input/js0 -> Driver version is 2.1.0. Joystick (IPACS Ikarus Gamecommander) has 7 axes (X, Y, Z, Rx, Ry, Rz, Throttle) and

Hi, I am wanting to use NUT to connect to an Eaton Powerware 5110 UPS using USB to connect. - I am using NUT 2.0.2 - I have compiled it with USB support - I can see that the UPS is registered as connecting in /var/log/messages eg usb 3-1: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 4 But I don't know how to progress from here.

Hi all, I just got myself 2 APC Back-UPS CS 350 I downloaded the stable nut tar.gz installed it. This is not the first time i install and configure nut so i used the same configuration as on my other server as i always did. Then i made the 2 required modification. I changed these 2 thing: driver = apcsmart port = /dev/hiddev0 # ls -al /dev/hiddev0 crw------- 1 nut nut 180, 96

I've got a Powercom Imperial UPS, with an internal USB<=>serial converter. It implements the same protocol as other powercom devices implements, but only when talking over serial port (there's no such port on the device). Someone wrote a draft version of usbserial driver for it, and the UPS works with this kernel-level driver and with powercom driver from nut (using /dev/ttyUSBx

hi i have a belkin ups here some setting chmod 0600 /dev/hiddev0 chown nut:root /dev/hiddev0 linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl -u root start

Ok, so I have made some progress that seems to suggest the initial “fix” I stumbled upon isn’t required. I haven’t yet worked backwards to figure out reasons why our customers have had similar complaints or solve the problem on the CentOS VM yet, but that is on the todo list. I am hoping it ends up just being not enabling the service on startup, but I can’t say that explains away all the symptoms

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

hi wine user group I try to run a model aircraft simulator (aerofly professional deluxe) with wine. the installation was a success. after that, I can start the simulator but it doesn't identify the usb game commander (at least a 4 channel usb device). but the kde desktop control center detect the right device IPACS Ikarus Gamecommander (/dev/input/js1). how I get support for this device

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

Good day to you wine users I've following problem, I've a cheap joystick which is recognized as DragonRise Inc. - however many of them are I guess. It's some china stuff which is each time labeled different but almost always the same device (or so I've heard). Everything works great except the joystick is recognized as being 7 axis one - I really dont know why it does this. It

Updates on this: 1) Making progress in the related Dev list thread here: https://alioth-lists.debian.net/pipermail/nut-upsdev/2019-June/007440.html I’ll keep that thread up to date with progress as I go. But if there are specific things it would make sense to test here, just let me know. Otherwise, I figure reducing redundancy makes sense? 2) I tried disabling usbcore.autosuspend, but

Greetings: I've been following through the instructions on how to connect an APC BackUPS 650 ES to USB, and have it monitored with NUT... I know my system can SEE the UPS, as DMESG shows this: hiddev96: USB HID v1.10 Device [APC Back-UPS ES 650 FW:818.w1.D USB FW:w1] on usb-0000:00:04.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver I can see

Good Evening, I have an app that is not in the app database entitled RealFLight G4. I have it installed, but ut used the Direct X input method to talk to a hand held joystick like controller in which is embedded security and copy protection. The application is griping about not being able to find the Interlink Controller. In dmesg it shows up and is usable in other applications, so Linux