similar to: Bayes Factor

I was surprised to find that just changing the base level of a factor variable changed the number of significant coefficients in the solution. I was surprised at this and want to know how I should choose the order of the factors, if the order affects the result. Here is the small example. It is taken from 'The R Book', Crawley p. 365. The data is at

Dear all, first I would like to tell you that I've been using R for two days... (so, you can predict my knowledge of the language!). Yet, I managed to implement some stuff related with the Long-Tail model [1]. I did some tests with the data in table 1 (from [1]), and plotted figure 2 (from [1]). (See R code and CSV file at the end of the email) Now, I'm stuck in the nonlinear regression

Dear all, I would like to ask you if R has a library that can work with different GPS formats For example  I have a string of this format N50° 47.513 E006° 03.985 and I would like to convert to GPS decimal format. that means for example converting the part N50° 47.513 to 50 + 47/60 + 513/3600. Is it possible to do that with R? What is the name of such a library? I would like to thank you in

Hi Everyone, I want to make 3 lines on the same graph (not as subplots, all in the same window, one on top of each other) and I want them to be quantile-quantile plots (qqplot). Essentially, I am looking for the equivalent of Matlab's "hold on" command to use with qqplot. I know I can use 'points' or 'lines', but these do not give me a qqplot (only appear to work

Given a set of integers of different values how do I calculate the minimum number of the largest of integers that are required, when summed, to equal 50% of the total sum of the the set? For example, > length(myTable$lgth) [1] 303403 > sum(myTable$lgth) [1] 4735396 I know through brute force that the N50 of the following set is 42 but I don't know how to solve this without iteration

Hola comunidad XD, necesito ayuda con estola idea es que para cada valor del frame x4 si es cero ponga cerosino que ponga un valor del frame Nsinel cual tiene una estructura como % | n25% | 150% | 275% | 3100% | 4 y x4 tiene una cierta cantidad de valores en 0 (poco menos de la mitad pero varian aleatoriamente) y los demas un valor aleatorio entre 0 y 1Tomando en cuenta que si el

Hi, i just want to know whether there are any alternative file systems for HP SFS. I heard that there is Cluster Gateway from Polyserve. Can anybody plz help me in finding more abt this Cluster Gateway. Thanks and Regards, Ashok Bharat -----Original Message----- From: lustre-discuss-bounces at lists.lustre.org on behalf of lustre-discuss-request at lists.lustre.org Sent: Tue 2/12/2008 3:18 AM

Hi all, I''m trying to come up with a lens for the zabbix agent config files. I find the lens language untransparent at best, so I''m struggeling to figure out what''s up. The debugging possibilities are extremely limited. Here''s what I have now: zabbix.aug: ==== (** An adjusted copy of the postfix_main module **) module Zabbix_agent = autoload xfm

Don't know how much control you have over the remote situation but some UPSes have their own logs which should show this. Also, some UPSes have add-in boards providing network connections with various services. If these outages are costing enough money and the remote UPS doesn't have the add-in card but does have the capability of adding one you might be able to justify the expense.

On 10/30/2016 01:12 AM, Hadi Motamedi wrote: > Dear All > I am using a centos server for cdr billing and mediation device on a remote > network. I am experiencing problem that I am suspicious it comes from main > supply power cut at the remote site. The power supply to the remote site > comes from battery charger that will be automatically switched in circuit > under main supply

It appears that interfaces participate in STP's forwarding delay even when STP is disabled for a given bridge. I can remedy by setting the FD to 0 for each new bridge, but I'm wondering if this is by design or oversight. [root@ ~]# brctl show bridge name bridge id STP enabled interfaces br0.690 8000.00065b8bce3e no eth1.690

Hi! Are these results i got from my benchmarking "normal" or is there something strange happening in my system? This box is going to be a mailserver, so i tested various fs to decide on which i should utilize. I personally dislike reiserfs because it has proven somehow unreliable on our servers (although it got better in the more recent kernels), ext3 would be quite good (fsck'ing

Hi, I have a weird problem with RSync: On a NAS are about 1,2 TB data. When I plug in a harddisk and make a backup with RSync, "df -h" shows the backup disk filling up to nearly 1,2 TB. But after RSync has finished, there are only 3.7 GB on the backup disk. System: Linux nas 2.6.37-gentoo-r4 #1 SMP Tue May 3 19:54:31 CEST 2011 x86_64 Intel(R) Atom(TM) CPU 330 @ 1.60GHz GenuineIntel

I am having problems with trying to run R from a crontab job. I have a c-shell file that calls the R script. I get an error concerning the X11 display (see below). I have included the c-shell file and the output from the crontab job. It appears that my DISPLAY environmental variable is not set. Is that necessary, even when the output of the plot command is to a png file? Can someone tell me how to

Dear All I am using a centos server for cdr billing and mediation device on a remote network. I am experiencing problem that I am suspicious it comes from main supply power cut at the remote site. The power supply to the remote site comes from battery charger that will be automatically switched in circuit under main supply power cut but cannot provide adequate power for more than 2 hours . I am

I have glusterfs 3.1.2 running on Debian, I'm able to start the volume and now mount it via mount -t gluster and I can see everything. I am still seeing the following error in /var/log/glusterfs/nfs.log [2011-02-04 13:09:16.404851] E [client-handshake.c:1079:client_query_portmap_cbk] bhl-volume-client-98: failed to get the port number for remote subvolume [2011-02-04 13:09:16.404909] I

̨ʤÏòÄãÎʺÃ! ÎÒ¹«Ë¾³¤ÆÚ´Óʹú¼ÊóÒ×,ΪÍÚ¾òÊг¡Ç±Á¦¡¢À©´ó¾­Óª¹æÄ£,ÒâÔÚ¹óµØ Ñ°ÕÒÁôÒ×´°¿Ú,Ìؽ«´Ë¼Ûͬ±í³Ê¹óµ¥Î»²Î¿¼.ÎÒ˾ÌṩһÁ÷Æ·ÖÊ,Ò»Á÷·þÎñ,ËÍ»õÉÏÃÅ, »õµ½¸¶¿î, ÅúÁí¾ù¿É.»¶Ó­¸÷½çÅóÓÑÀ´µç´¹Ñ¯¼°Ö§³Ö.¶àл!!! ̨ʤ¹«Ë¾ ÖйúITóÒײ¿ :ÇØ Áú ͼ ÇëÎðÖ±½Ó»Ø¸´£¬ÓÐÒâÕßÇëÀ´µç ------0139-59726696 Ò»:±Ê¼Ç±¾µçÄÔ(È«ÇòÁª±£µ¥,ÈýÄê) ±Ê¼Ç±¾µçÄÔÊÖ»úÉÏÍøרÓÃPC¿¨----------1450Ôª A . Ë÷Äá SONY SR/27K(4500Ôª)

̨ÕýÏòÄãÎʺÃ! ÎÒ¹«Ë¾³¤ÆÚ´Óʹú¼ÊóÒ×,ΪÍÚ¾òÊг¡Ç±Á¦¡¢À©´ó¾­Óª¹æÄ£,ÒâÔÚ¹óµØ Ñ°ÕÒÁôÒ×´°¿Ú,Ìؽ«´Ë¼Ûͬ±í³Ê¹óµ¥Î»²Î¿¼.ÎÒ˾ÌṩһÁ÷Æ·ÖÊ,Ò»Á÷·þÎñ,ËÍ»õÉÏÃÅ, »õµ½¸¶¿î, ÅúÁí¾ù¿É.»¶Ó­¸÷½çÅóÓÑÀ´µç´¹Ñ¯¼°Ö§³Ö.¶àл!!! ̨ÍåÕýÈÙ¹ú¼ÊóÒ×¹«Ë¾ ÖйúITóÒײ¿ :Áø½ðÃú ÇëÎðÖ±½Ó»Ø¸´£¬ÓÐÒâÕßÇëÀ´µç ------0138-50738839 Ò».µçÄÔÅä¼þ(RMB.Ôª): A:Ö÷°å: ΢ÐÇ 845Pro2-LE(Socket,i845,SDRAM,AC97Éù¿¨)---530 845Pro

The build would be failed and exit if build-gnu-efi.sh is failed, so we'd better not suppress the output of build-gnu-efi.sh, which is good for debugging. Signed-off-by: Robert Yang <liezhi.yang at windriver.com> --- efi/check-gnu-efi.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/efi/check-gnu-efi.sh b/efi/check-gnu-efi.sh index 85305f8..7d99e9a 100755 ---