Displaying 20 results from an estimated 7000 matches similar to: "'mv: preserving permissions for `all.R': Operation not supported' when installing R 3.1.0 via compiling source code in CentOS"
2024 Jan 12
1
Sys.which() caching path to `which`
On Thu, 11 Jan 2024 09:30:55 +1300
Simon Urbanek <simon.urbanek at R-project.org> wrote:
> That said, WHICH is a mess - it may make sense to switch to the
> command -v built-in which is part of POSIX (where available - which
> is almost everywhere today) which would not require an external tool
This is a bit tricky to implement. I've prepared the patch at the end
of this
2006 Mar 09
1
R2.2.1-patched build failed with PGI 6.1 on x86-64
Hi All,
While attempting to build R-patched using the Portland Group compiler suite
on our dual Opteron 250 box running Scyld 29cz5 (based on RH, kernel
2.4.29), I get:
make[5]: Leaving directory
`/home/andy/Rbuild/R221-pgi/src/library/tools/src'
make[5]: Entering directory
`/home/andy/Rbuild/R221-pgi/src/library/tools/src'
pgcc -I../../../../include -I/include -I/include/CC -fpic
2002 May 01
2
R-1.5.0: compiling package foreign on WinNT failed
Dear R-help,
I was able to build R-1.5.0 on WinNT w/o problem (actually it seems easier
than previous version). However, I encountered problem when trying to
compile the recommended package foreign:
make: Entering directory `/cygdrive/g/rbuild/R-1.5.0/src/gnuwin32'
make DLLNM= FLIBS="-lg2c -lRblas" BUILD=MINGW \
-C G:/Rbuild/R-1.5.0-recommended/R.INSTALL/foreign PKG=foreign
2012 Jul 12
0
HAR-RV-CJ Moedel
I am trying to write a loop to forecast realized volatility over successive
days for the purpose of VaR prediction using the HAR-RV-CJ model which is as
follows:
log(RV_t+1) = ?_0 + ?_CD log(CV_t) + ?_CW log(CV_t-5) + ?_CM
log(CV_t-22) + ?_JD log(J_t + 1) + ?_JW log(J_t-5 + 1) + ?_JM log(J_t-22 +
1) + e_t
where RV is realized volatility, CV is continuous volatility and J is the
jump which is
2005 Apr 07
3
R-beta 2004-04-07 build failed on AIX
I thought I'd give this another shot before the official release. I tried
building R-beta_2004-04-07 on the AIX system that I have access to, and it
seemed to failed at lazy-loading survival. I'd very much appreciate any
pointer on what to try or look for next.
1. I set OBJECT_MODE to 64 for building 64-bit binary.
2. I edited config.site with the following:
CC="xlc_r"
2002 Jun 28
1
windres problem
Hello,
I am trying to build an R package for Windows from an R package
for Linux. There seems to be a "windres" problem somewhere.
Here's what I get.
C:\Temp>Rcmd build --binary VGAM > mm
make[2]: windres: Command not found
make[2]: *** [VGAM_res.o] Error 127
make[1]: *** [src/VGAM.dll] Error 2
make: *** [pkg-VGAM] Error 2
In more details, it goes like the following.
2000 Feb 01
1
plotting spectrum of time series etc
Hi, everyone, I tried to use "spectrum()" or "spec.pgram()" to get a
periodogram of a time series but they didn't work.
Even the examples given in the help file didn't work (all with the same
error message, below). And the 'ts'ibrary was
loaded with "library(ts)" or "library("ts"). I also tried
library(tseries) but got the same problem.
2007 Oct 02
0
patch: allow R CMD build exclude patterns to match symlinks
The following is a patch (svn diff) for the R CMD build script that
calculates exclude patterns after the tar/untar step rather than before. The
perl find() function, used in the calculation of the exclude patterns,
ignores symlinks, which meant that directory symlinks were not considered
for exclusion. Since the tar/untar step resolves (copies) symlinks, this
works around that limitation.
2004 Jan 20
1
problem with rcmd build R-devel
Hi All,
I am having a problem with Rcmd build using R-devel on WinXP. If I try
to build a package using the --binary flag, I get the following error:
Error: cannot change to directory ' 'c:/TEMP/Rbuild.XXXX' '
Where XXXX is some number. I can get Rcmd build to work using R-1.7.1
and R-1.8.0, so I don't think it is a permission problem. I looked at
the build file, and the
2004 Jan 20
1
problem with rcmd build R-devel
Hi All,
I am having a problem with Rcmd build using R-devel on WinXP. If I try
to build a package using the --binary flag, I get the following error:
Error: cannot change to directory ' 'c:/TEMP/Rbuild.XXXX' '
Where XXXX is some number. I can get Rcmd build to work using R-1.7.1
and R-1.8.0, so I don't think it is a permission problem. I looked at
the build file, and the
2002 May 16
3
building packages on windows
Has anyone had success building a package on a windows machine?
I am trying the following command with no luck (perhaps my flags are
incorrect?). At this point I am stuck. Any help greatly appreciated.
Niels Waller
(BTW - I have no idea why it cannot find sh.exe since I have it is a
directory that is specified in a path statement)
H:\R\bin>rcmd build --binary --use-zip h:\taxon2
* checking
2009 Nov 04
1
Building from source under Windows 7
I have downloaded all of the tools and read the readme's that I know about but I am still getting the following error when I try to build from source:
C:\Program Files (x86)\R\R-2.9.2\src\gnuwin32>make all recommended
make[1]: `Rpwd.exe' is up to date.
cp -p etc/Makeconf etc/Rcmd_environ etc/Rconsole etc/Rdevga etc/Rprofile.site et
c/rgb.txt ../../../etc
cp: preserving permissions for
2011 Mar 07
1
Problem building R-2.13 r54683 on Windows
Hi, Unfortunately it looks like this problem has somehow been reintroduced.
I am now trying to build R-devel 54683 from source, again following
the manual. I get the same error as below:
gcc -std=gnu99 -I../../include -DHAVE_CONFIG_H -O3 -Wall -pedantic
-c zutil.c -o zutil.
o
make[4]: *** No rule to make target `Rzlib.def', needed by `Rzlib.dll'. Stop.
make[3]: *** [rlibs] Error 1
2015 Jan 08
0
New version of Rtools for Windows
On Thu, Jan 8, 2015 at 10:48 AM, Hin-Tak Leung
<htl10 at users.sourceforge.net> wrote:
>
> The r.dll crash is easy - you need to be using gcc-ar for ar, and gcc-ranlib for ranlib. I also posted a patch to fix the check failure for stack probing, as lto optimizes away the stack probing code, as it should.
>
> yes, lto build's speed gain is very impressive.
>
>
I
2006 Jun 12
2
about integration of a library into package creation
hello,
i try to create a package , and i call a library in the namespace file
such as : useDynLib(quadprog)
after checking my directory with the command "rcmd check" (i am on
WindowsXP)
i get an error: package / namespace load failed
the path of the library is: D:\R\library\quadprog
the path of the building files is: D:\RBuild\svcR
and the comand i use to compile is: rcmd
2003 May 06
0
supply electric appliances
From:Mr Sander Yuan, G.Manager
Chnze Electric Equipment Co.ltd.
No.17-505 Lumingyuan Lucheng Industrial zone Wenzhou China 325007
Fax:86-577-88776860 Tel:86-577-88776861 or 88776862
E-mail:qunze@mail.wzptt.zj.cn chnze@mail.wzptt.zj.cn
http://www.chnze.com; http://www.electricbase.com
Dear Sir,
We are pleased to introduce ourselves as leading manufacturers and
exporters in
2014 Aug 13
2
[LLVMdev] Efficient Pattern matching in Instruction Combine
Even if you can't implement such an algorithm sanely, ISTM that
auto-generating this code from a table (or whatever), and choosing
canonical results (to avoid a fixpoint issue), rather than what seems
to be hand-additions of every possible set of minimizations on three
variables, is still a better solution, no?
At least then you wouldn't have human errors, and a growing file that
makes
2014 Jan 09
0
Building R on Windows: mkdir of Rtools creates directories with read-only permissions [WEIRD]
This is is an issue that bugged me for a while. I encountered a year
ago (April 2012) when I first tried to build R from source on Windows.
I never figured out what the solution is or if I'm doing something
wrong myself (but I have found a tedious workaround). I'm still on
the same Windows 7 Ultimate machine with NTFS, but I now made sure I
started from scratch so I have a completely
2004 Dec 22
2
Creating packages in windoze: *** [indices] Error 1
Dear R community,
I am running R 2.0.1 on a Windoze XP OS. I recently upgraded from R 1.9x to
2.0.1 and I am currently
upgrading a my personal function packages. My other packages compiled
without
a hitch but I am having a difficult time with my largest package.
Can someone please help me with the following error message
"Error in parse(file, n, text, prompt) : syntax error on line
2014 Aug 13
2
[LLVMdev] Efficient Pattern matching in Instruction Combine
Thanks Sean for the reference.
I will go through it and see if i can implement it for generic boolean
expression minimization.
Regards,
Suyog
On Wed, Aug 13, 2014 at 2:30 AM, Sean Silva <chisophugis at gmail.com> wrote:
> Re-adding the mailing list (remember to hit "reply all")
>
>
> On Tue, Aug 12, 2014 at 9:36 AM, suyog sarda <sardask01 at gmail.com> wrote: