similar to: pop3-login segfaulting

Hi Guys, I'm looking for a light on the next problem integrating an Asterisk server with a Panasonic PBX using a PRI. The follow config has been working for two weeks and works almost fine, except for some little problems... 1- PSTN provides the E1/PRI (EuroISDN) 2- Asterisk receives the PRI 3- Asterisk provides a second PRI to Panasonic 4- Panasonic receives the asterisk PRI People can

We have a setup running Asterisk interconnected to a Panasonic TDA200. The Asterisk server has a two port E1 card, one connected to the phone company and the other to the Panasonic. Everything is running fine and we can send and receive calls from the Panasonic and phone company. We are using MFC/R2 for both links on Asterisk 1.4.4 and Zaptel 1.4.3. The only detail we have is that we cannot

Hi, Anybody have an idea how to integrate * with a Panasonic td-1232? We one at the main office, and are installing * in a branch office. We'd like to be able to make calls from * extensions to Panasonic extensions and the other way around. Making outgoing calls from extensions one one side to lines on the other would be nice too. I can put another * machine at the main office, but what is

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

I currently have: Telco-PRI ---- Panasonic DBS576 PBX ---- E&M wink T1 ---- Asterisk. I have configured the Panasonic to forward my Asterisk DIDs to the Asterisk extensions over the T1. I do not get DID nor CID on the Asterisk, so I want to use PRI between the PBXs. I do not want to pay for another PRI card for the Panasonic. (T1 and PRI are different cards) I see this as my least

Dear Pals One customer has a Panasonic PBX KX-T336 with 60 ext. and a E1 (R2) for Trunks working perfectly now, This customer has 10 wireless links to his branches, wireless working great now, no voice at the present MY IDEA : T1Card into the Panasonic (additional to the E1) connected to a T1 Digium Card into Asterisk as far as I know the T1 Card can be configured as E&M to act as

ðÏÞÅÍÕ ÂÙ É ÎÅÔ? ÷ÏÐÒÏÓ ÔÏÌØËÏ × ÔÏÍ, ËÁË Õ ÔÅÂÑ ÂÕÄÅÔ ÓÏÅÄÉÎÑÔØÓÑ ÐÁÎÁÓÏÎÉË Ó ÁÓÔÅÒÉÓËÏÍ. Date: Wed, 30 Jul 2003 20:06:17 +0400 From: Pavel Zheltouhov <pavlo@comlink.ru> To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] asterisk,ata186 and Panasonic TD1232 Reply-To: asterisk-users@lists.digium.com I have Panasonic TD1232 pbx, few cisco ata186 and linux box with asterisk.

Sorry if I post in this forum, this may be not the right one, but I hope to find in here some experts which could help me out. I have in one location 8 extensions from a Panasonic PBX ?KX-TD1232? connected to FXO Ports on an MultiVoIP Gateway from Multitech. On the other location I have 8 SP5100 IP-Phones from Micronet as remote extensions. Between the locations I have a VPN.

Thanks for the information Lee ! Still, something is still strange to me, since this two Panasonic Fax machines are receiving at least 20 multi-paged faxes a day (they are in same office as both Asterisk boxes, and me :) ). Beside that, POTS lines in those two faxes are from same PSTN switch as line in X100P in one of Asterisk boxes, and the ISDN PRI lines in other Asterisk box is from same PSTN

Hello! I have following connections over isdn pri: avaya definity---pri--asterisk--pri-panasonic 500 Just because panasonic 500 can't send user's names. I also want to have reverse callerid for avaya users. But if there is no answer in dial plan: exten => _XXXX,1,Set(CONNECTEDLINE(name)=${DB(names/${EXTEN})}) ;exten => _XXXX,n,Answer exten => _XXXX,n,Dial(DAHDI/g4/${EXTEN})

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

Hi, I have 2 asterisk boxes as Gateway, in this arrangement. (PANASONIC PBX) - [ASTERISK1] - network - [ASTERISK2] - (ANALOG PHONE) everything works great, in both directions (receiving and making calls), but when i get a call on the (ANALOGPHONE), I haven't been able to transfer it to another extension of the PANASONIC PBX using the flash key. I've tried the using the t T options on

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

hi, anybody know how to make a sip trunk between trixbox and panasonic kx tde 100? i've tried, but always failed when calling from trixbox to panasonic. thanks,,, -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130312/1dd5170b/attachment.htm>

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN

Hi. I've searched the archives and found nothing regarding collaborating Asterisk with a Panasonic PBX (TD1232 to be exact) Here's my question: Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX? On the hardware page for the X100P card is says it's great for

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a medium sized business that is interested in implementing * as their PBX system. They currently have a Panasonic system with Panasonic handsets that they are going to replace Asterisk with, as the current system is maxed out, and they don't even have voicemail capabilities. I have been considering using an Adtran Atlas 550 with FXO and