similar to: ACPI reboot-issue (CentOS 4)

Hi all, Same system as my previous mail - Asus P5N32-E SLI motherboards, CentOS 4 x86_64. The kernel-supplied forcedeth driver works in kernel-smp-2.6.9-55.0.9.EL (both with and without acpi=off), but after upgrading to kernel-smp-2.6.9-67.0.4.EL, networking does not start. After trying dhcp, ifconfig reports 17 dropped TX packets (all other counters are empty). Ethtool reports the same

Hi all... First of all, I'm new to this list. Thanks in advance for the help I surely will get here ;) I have installed a CentOS 5.2 64 bit on a computer, and I can't get it to boot. The box is a custom built computer, with this components: - ASUS P5N64 WS Pro motherboard (nForce 790i Ultra SLI) More details here:

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

For those who haven't seen my several previous postings about problems with this (now not quite so) new PC, I have an ASUS P5N32-SLI Deluxe motherboard. The boot drive and primary filesystems are on an SATA disk and I'm having no problem with that. However, I recently plugged in a couple of IDE drives salvaged from my old PCs and I'm running into trouble with one of those. The drive

Hi, I just tried the live CD for CentOS 5.0 on a desktop computer and decided to see if suspend worked. It seems it did, but I'm unable to start the machine again. It's a DIY system with an Asus K8V-X motherboard[1], an AMD Clawhammer 3200+ and 1 GB of Kingston ECC RAM. The system has been perfectly stable despite being utterly abused on a daily basis for almost 3 years. I've tried:

I've just installed CentOS 4.2 on a brand-new PC. It appears to be working fine except for one thing: When the system is first powered on, the boot sequence hangs after Starting udev: Initializing hardware ... storage network audio If I then hit the reset button, it reboots and successfully proceeds. Looking at rc.sysinit and the output of kmodule, it would appear that the problem is

Did somebody can give me some advises on hardware for building a Centos linux server? --- Michel Donais -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110213/3c928cc9/attachment.html>

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

What socket AM2 motherboards out there work well with xen (i.e. support > 4G ram, sata and lan chipsets work). I''m looking to probably run one of the lowpower Athlon 64 X2 4200''s in it. I''d also like to see atleast 4 ram slots. Anyone have any recomendations? Thanks, Doug _______________________________________________ Xen-users mailing list

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hi all, I've upgraded my mysql-installation from the previous 4.1.12 version to the new 4.1.20 version, and I've found that a daemon I'm using suddenly can't log into the database anymore. I've verified the problem with the mysql command; [root at sciream ~]# mysql -upostfix -p mysql Enter password: ERROR 1045 (28000): Access denied for user

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do

Hi people, I ran into one of these silly issues I'd like to share as I think the reason behind it may be a flaw in the current initrds. The setup; Dual-Xeon Intel-chipset motherboard. SATA-disk attached to ICH, onboard Adaptec SCSI-controller. Installed system, updated packages, no problems. Basic, non-LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

Hi List, I've started looking into iSCSI, and I'm wondering if there is an iSCSI target (I've found the initiator in iscsi-initiator-utils) that ships with CentOS, or if not, what the recommended target would be. I'd like to export either a partition or (preferably) a file-as-a-partition. Yours, -S -- Simen Thoresen, Wulfkit Support, Dolphin ICS

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any