similar to: en01 network

I am trying to specify a static IP on the new dracut format. I was using this: http://man7.org/linux/man-pages/man7/dracut.cmdline.7.html So my grub entry consists menuentry "Install CentOS 8" { linux /boot/vmlinuz noverifyssl ks=https://something ip=192.168.1.3::192.168.1.1:255.255.255.0::eth0:on:192.168.1.1 biosdevname=0 net.ifnames=0 ksdevice=eth0 inst.sshd sshd=1

I installed 7.1 with the command line values biosdevname=0 net.ifnames=0 thinking this would result in ifcfg-eth0 being the file to use... The system still created an ifcfg-eno1 file and that was what is being used for network config information. I remove the ifcfg-eno1 and rebooted - got no network. I then copied back the ifcfg-eth0 to ifcfg-en01 and changed the device name in the file and

I have built a CentOS 8 base image from a kickstart, for use in OpenStack. This image boots fine but the problem I have is that I can't stop udev from renaming the network device from eth0 to ens<something>. I have /etc/sysconfig/network-scripts/ifcfg-eth0 with the correct HWADDR defined in it, and have set net.ifnames=0 and biosdevname=0 in the grub configuration, but nothing I have

On 02/01/2016 07:00 AM, Leroy Tennison wrote: > The issue here may be systemd ... > Web documentation at freedesktop.org says net.ifnames needs to be set to zero, I found just the opposite but if it doesn't work for you try both before giving up. Just to clarify: net.ifnames=0 disables the systemd/udev interface renaming feature. biosdevname=0 disables the biosdevname interface

On Fri, Jun 05, 2015 at 10:35:49PM +0100, J Martin Rushton wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > > > > If I wasn't already swamped with tasks I would offer to help. I > > appreciate all your dedicated hard work. > > > > > Quite apart from the aesthetics, is there any easy way to turn it off > in grub2?

Hi All :) I have three servers, all with centos 7 installed 3 days ago. I need on them "old" naming scheme (ethX) for network interfaces, because of that: # grep GRUB_CMDLINE_LINUX /etc/sysconfig/grub GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-XY/swap rd.lvm.lv=centos_node-XY/root rhgb quiet ipv6.disable=1 net.ifnames=0" net.ifnames=0 was added and afterwards I ran:

Hi, I'm currently experimenting with CentOS 7 on a couple of installations. I'm reasonably proficient with CentOS 5.x and 6.x. I'd like to manage networking using a more traditional approach (Keep It Simple Stupid). Here's what I tried so far, starting from a minimal install: Install net-tools (to be able to use ifconfig). Get rid of NetworkManager: # yum remove

On Thu, 2015-06-04 at 21:18 -0500, Johnny Hughes wrote: > The CentOS theme looks just like the RHEL theme since there was only a 7 > and not any trademark reasons to change that theme. Apologies. I forgot. Centos is the same as Red Hat minus the product branding. If a display is crap in Red Hat, then the Red Hat crap will manifest itself in Centos, minus the Red Hat branding. >

Odd situation: I've mentioned before that I have several users for whom I have to spoof the MAC address, due to a software license. Now, I've got net.ifnames=0 biosdevname=0 on the grub2 command line, and I've got the spoofed MAC address in /etc/sysconfig/network-sctipts/ifcfg-eth0. But he had a serious problem - X froze, and he thought to reboot, rather than call me. It came up with

Hello All, I have one CentOS 6 KVM virtualization server that I built around a year ago (best I can tell it was in October 2012) at which time I would have been installing 6.3 [0]. That particular install used the Consistent Network Device Naming [1] conventions (PCIe NICs are p1p1, p1p2). I started to build out a new KVM virt server (kickstarting a 6.4 install now as compared to 6.3 back then)

There may be ways to force NIC naming, I've done so but only on Ubuntu so you'll need to do the research if it's important to you. Things to look for based on my experience: 70-persistent-net.rules, net.ifnames=0, biosdevname=0. ________________________________ From: CentOS <centos-bounces at centos.org> on behalf of Nicolas Kovacs <info at microlinux.fr> Sent: Sunday,

I am trying to boot a grub entry for CentOS 8 menuentry "Server Install CentOS 8" { linux /boot/vmlinuz noverifyssl ks= https://devgeis.LayeredSolutionsInc.com:443/kickstart/ks_update_to_server8.cfg biosdevname=0 net.ifnames=0 ksdevice=eth0 ip=192.168.1.13 gateway=192.168.1.1 netmask=255.255.255. 0 nameserver=192.168.1.1 inst.sshd sshd=1 initrd /boot/initrd.img

I have just installed 6.3 on a machine that was previously running 5.8. Under 5.8 eth0 was eth0. Now with 6.3 /sbin/ifconfig gives me lo, wlan0 and p4p1 (instead of eth0). I would like to make the ethernet a static IP as I intend to for this to be machine used on my LAN only. However, when I do /usr/sbin/setup -> Network Configuration the device is not listed. Can anyone tell me why this is

Got a problem: a user's workstation froze. He wound up rebooting, without calling me in first, so I dunno. But, and this is a show-stopper, when it came up, it came up with the firmware MAC, not the spoofed one. In /etc/sysconfig/network-scripts/ifcg-eth0, I've got the spoofed MAC address, and a UUID. In the grub.conf, I've got net.ifnames=0 biosdevname=0. But when I logged onto his

On Fri, Aug 26, 2016 at 10:39 AM, Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 08/25/2016 11:35 PM, Phil Manuel wrote: >> >> The relevant kickstart section is:- >> >> part /boot/efi --fstype efi --grow --maxsize=200 --size=20 --ondisk=sda >> bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=sda1 >> autopart

This is my /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/boot/vmlinuz-4.18.0-147.5.1.el8_1.x86_64 root=UUID=c1bef884-0180-4955-a669-c99a8c64f75a ro crashkernel=auto resume=UUID=0fe1a972-9912-4803-b5ec-265a13a888c1 biosdevname=0 net.ifnames=0 rhgb quiet rd.driver. blacklist=nouveau nomodeset nouveau.modeset=0 acpi_backlight=vendor "acpi_osi=!Windows 2013" "acpi_osi=!Windows 2012" Jerry

I am trying to add an efi partition to my working kickstart file. bootloader --driveorder=sda --append="rhgb quiet biosdevname=0 net.ifnames=0" clearpart --all --initlabel part / --ondisk=sda --fstype xfs --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /boot/efi --ondisk=sda --fstype efi --size=1000 --asprimary part /home --ondisk=sda

On 2019-11-18 12:45, Stephen John Smoogen wrote: > On Mon, 18 Nov 2019 at 13:22, Jerry Geis <jerry.geis at gmail.com> wrote: >> >> I am trying to boot a grub entry for CentOS 8 >> >> menuentry "Server Install CentOS 8" { >> linux /boot/vmlinuz noverifyssl ks= >>

Thanks Robert, I was doing that but it was still renaming to ens*. However, I now know why, and have fixed it. For those who are interested, the problem was that when I created the base image from a kickstart I didn't pass net.ifnames=0 to virt-create, and I ended up with an image that had forgotten about eth0 completely. I have now redone the kickstart with net.ifnames=0 and all is well.

Nux! wrote: > Hello, > > ksdevice specifies which NIC to be used during the network install. > > The new naming conventions indeed make this more complicated than it needs > to be. To go back to the old naming scheme (eth0, eth1 ...) just add this > to boot parameters (kernel cmdline): > biosdevname=0 net.ifnames=0 Yes! Actually, the other admin I work with and I were just