similar to: OT - Is T.38 possible on SPA8800 FXO port ?

I have 2 ip phones linksys spa921 and 1 normal phone connected to a cisco spa8800, all them are internal lines. 1.- spa921, 401 ext 2.- spa921, 402 ext 3.- normal phone connected to spa8800 404 ext. It had a very strange behavior when I was configuring call transfer and call pickup. These are steps to repeat it: 1.- from 401 call to 404 2.- from 404 don't answer it. 3.- from 402 press *8

Hi I'm trying to get the spa 8000 used with a fax machine using t38 passthru i have tried with 1.6.2 and 1.8.3 and is still a no go the provider i use is 012 in israel wich supports t38 (i use it with ffa) could anybody give me a clue how to get this working if it should t38pt is set to yes in sip.conf Thanks, Israel -------------- next part -------------- An HTML attachment was

Hello list, We're currently facing some issues concerning T.38 gateway faxing. This is a device used almost exclusively for receiving faxes. Calls are incoming to asterisk on a SIP trunk (sangoma netborder) using G711A. Gateway mode is activated in the asterisk dialplan towards a Cisco SPA 112 running firmware 1.3.5. We are using asterisk 1.8.13.0 with the T.38 gateway patch applied (I know I

Hi all, I'm getting ready to setup SIP/TLS and SRTP. But I have a few questions. The first one is that I was reading an article at: https://supportforums.cisco.com/docs/DOC-15381 That indicated that Asterisk doesn't support TLS as an OPTIONAL transport. It's either all or nothing. Specifically, this is what it said: ============================================== *Note: There is

Hello, I intend to buy a FXO/FXS device from Linksys. I'm thinking about SPA3102. What you guys think about it. Is ok, is working with asterisk, can i use it like voip peer. Thank you for your advice. Jonson. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070117/93bc7fdb/attachment.htm

Hello everyone, Day before yesterday (i.e. 07-Nov-2007) i got all source(trunk) for asterisk and asterisk-addons. After compiling everything together. i found that there is no voice between mobile phone and asterisk server. Phone <-->(SPA3102) <--> Asterisk <-- bluetooth (CSR chipset) --> Siemens (S55) i can call anyone on mobile network from phone(analog) call establishes

Hi all, With the gamut of FXO cards out there, I'm looking for a recommendation for home use. I have a nicely working Asterisk 1.4 system that just requires an FXO card to connect my NTL PSTN to it. My previous X101P clone seems to have kicked the bucket. Any suggestions would be greatly appreciated. Regards Kyle -- Kyle Gordon kyle@lodge.glasgownet.com http://lodge.glasgownet.com

I have a new dell t105(opty 1210's with 4 gigs of ram..sata hdd's and sata dvd-rom). I can bot to the Cent 5 64 bit dvd fine but once it asks where the install image is i tell it cd-rom..then it rejects the dvd spits it out and tells me it's not there. the same happens on 32 bit. I have downloaded centos5 twice now, md5 verified..and even burned at 1x(that took forever). Any

Hi, I''m runing a Fedora Core 6 on a Power Edge with Xeon Cranford that I planning to running Windows as a guest S.O. and reading "Fedora Xen Quickstar FC6" as document to install Xen on this server. This document recomend a "grep vmx /proc/cpuinfo" test to verify if computer is Intel VT supported. Running this command I don''t find any information about vmx.

The Cisco/Linksys SPA devices are also able to be provisioned automatically. On Wed, Apr 15, 2015 at 3:20 PM, Bryant Zimmerman <BryantZ at zktech.com> wrote: > Alejandro > > All of the Grandstream devices can be remote provisioned if you know what > you are doing. > > Bryant > > ------------------------------ > *From*: "Alejandro" <cdgraff at

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Okay, i'll move my discuss to asterisk-users. Thank you. On 1/17/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com> wrote: > > > On Wed, Jan 17, 2007 at 04:39:03PM +0800, ??? wrote: > > Jonson Player wrote: > > > Hello, I intend to buy a FXO/FXS device from Linksys. > > > I'm thinking about SPA3102. What you guys thik about it. > > > Is ok, is

I have a customer who has an analog PBX that is able to be put in "away mode" such that when an inbound call comes in, it rings their cordless phone. This lets them leave the desk without risking missing a call. However, we'd like to find a black box that would act like the cordless phone as far as the PBX was concerned, but instead of ringing a handset, we want it to dial an

Hi Scott, thanks for the answer, can share some link or documentation about how setup this in SPA3102? I try to get something about this using google, but found comments but nothing useful. Alejandro 2015-04-15 19:28 GMT-03:00 Scott Griepentrog <sgriepentrog at digium.com>: > The Cisco/Linksys SPA devices are also able to be provisioned > automatically. > > On Wed, Apr 15,

I am looking for a simple way to send occasional faxes via the FXO port on my SPA3102 -- without having to connect a fax modem to an ATA. In an ideal world, this would be some sort of "softfax" that runs on my Linux desktop and talks (via Asterisk) to the SPA3102 with T.38. This is one of those things that I thought would be relatively straightforward, but a couple of hours of Googling

OK, thanks again for all your help. I have resolved this, finally. The problem was that I configured VLAN 48 as the native VLAN on the trunk port.That was a mistake as apparently the native VLAN is the one where Cisco does not bother to tag packets. For now I set the native VLAN to VLAN 1 and that works. Cheers, Boris. On Sun, Jan 25, 2015 at 7:13 PM, Boris Epstein <borepstein at

Hy all, Recently a have a little problem with a Cisco device, SPA3102. I use this device with asterisk to dial out with outbound trunk. (SPA3102 has 1 FXO port) It working ok , but the device SPA3102 do this : when a call is placed for outgoing in asterisk and send to SPA3102 , this device "answer and dial the number in the same time" , in my CLI I see the channel is open , but on

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I

Ok, I downgraded spa3102 to 3.3.6. Now when I make a call from pstn and call is established asterisk seems to drop the call. However I still hearing ringback on pstn side, call is established again, and asterisk drops the call again, like a loop. -- Executing [preat_admin at nodo:1] Playback("SIP/PSTN-08214948", "horario-atencion/our-business-hours-are") in new stack