similar to: Function to get mailbox for a PJSIP Endpoint?

Is there an equivalent to ${SIPPEER(${peer},status)} for PJSIP? The closest I've been able to get is to use AST_SOURCERY to see if they have a contact ${AST_SORCERY(res_pjsip,aor,${peer},contact) but I'm not certain if I'll still have a contact entry after a phone has gone unreachable? -- A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a

Try this for CHAN_SIP: same => n,Set(Peer=${SIPCHANINFO(peername)}) ; Get the peer same => n,Set(MailBox=${SIPPEER(${Peer},mailbox)}); Get the mailbox same => n,VoicemailMain(${MailBox}@LocalSets,s) ; If we have a mailbox defined log into it If you are using PJSIP it's more complex same => n,Set(EndPoint=${CHANNEL(endpoint)}) ; Get the peer same =>

I have this in my sip.conf: exten => *98,1,Verbose(0,CALLERID number is "${CALLERID(num)}") same => n,VoicemailMain(${CALLERID(num)}@LocalSets,s) same => n,Hangup However, my extensions are set up so that they always show the external number, not the extension: [foobar2](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxxxxx callerid=Candace <5555551212>

Hello, I am slightly confused by the difference between chan_sip and pjsip. Especially the new (to me) objects aor and contact. I am having trouble mapping them to the typical SIP configuration settings on a phone. Suppose I have a phone with two line buttons, for two extension numbers. Now, I think that means two 'endpoints' in pjsip right? But what exactly is the difference between

I just realized that you are asking about dynamic AORs, not static Contacts in an AOR. That may be the difference. I have never actually tried giving a dynamic AOR a different name. And you wouldn't want more than one dynamic AOR, you'd just use an AOR that allowed more than 1 contact. On Wed, Apr 1, 2015 at 2:59 PM Trey Hilyard <kctrey at gmail.com> wrote: > I don't know

Joshua, On Sun, Jan 4, 2015 at 6:39 PM, Joshua Colp <jcolp at digium.com> wrote: [..snip..] > Also I notice, an AOR does seem do be directly correlated with an auth >> record, so why are >> they separate in the configuration, why not unify the aor and the auth >> objects? >> > > They aren't at all. Auth = Authentication. Used to authenticate

Thanks for responding, On Sun, Jan 4, 2015 at 5:45 PM, George Joseph <george.joseph at fairview5.com> wrote: > On Sun, Jan 4, 2015 at 3:29 PM, Antonio G?mez Soto < > antonio.gomez.soto at gmail.com> wrote: > >> Hello, >> >> I am slightly confused by the difference between chan_sip and pjsip. >> Especially the new (to me) objects aor and contact.

I am running asterisk 13.1.0 In pjsip.conf, the endpoint section has an aors and an auth field. I can name the auth field anything I want. The key is to set the auth=field accordingly. However, when I try this with the aors field, it never works. It seems I have to name the aors=field to match the name of the endpoint section. Is this correct? Would there ever be a need for multiple aors to

On Mon, Apr 25, 2016 at 11:11 AM, Olivier <oza.4h07 at gmail.com> wrote: > > > > 2016-04-25 18:14 GMT+02:00 George Joseph <gjoseph at digium.com>: > >> >> >> On Mon, Apr 25, 2016 at 10:00 AM, George Joseph <gjoseph at digium.com> >> wrote: >> >>> >>> >>> On Mon, Apr 25, 2016 at 9:29 AM, Olivier <oza.4h07

Hi, I realise this is an old question, but I’m struggling to get my head around it. The ERD suggests that endpoints can link to multiple AoRs In what situation would you actually use this? Given that mapping of inbound calls is primary done to the endpoint, it looks to me like most of the scenarios where this might be beneficial are actually not possible? One example I had envisaged was being

Hi Joshua > The chan_pjsip module doesn't prevent that. You'd need to provide the > full SUBSCRIBE now that it is actually finding the endpoint and coming > in. Ok, let's see if we can solve the mystery.. pjsip.conf [endpt-home](!) type=endpoint disallow=all allow=g722 allow=alaw allow=gsm ice_support=yes context=from-home allow_subscribe=yes

Hello everyone, I have started testing the PJSIP stack. I saw that it is possible to setup statically multiple AOR contacts, setup qualify_timeout and attach it to an endpoint, and then dial using this endpoint. When I setup the configuration I used the cli in order to see the status of the contacts, and it worked fine - whenever a contact is unreachable, the status is updated to Unavailable.

On Sun, Jan 4, 2015 at 8:48 PM, Joshua Colp <jcolp at digium.com> wrote: > Antonio G?mez Soto wrote: > > <snip> > > >> I did not mean they are the same, I meant that there seems to be a >> one-to-one relationship. >> >> So I am wondering, since the auth does seem useless without an aor, but >> an aor >> can exist without an auth, why

Howdy, Is there a way to use realtime with phoneprov.com and pjsip? I've got a working pjsip realtime config currently but I have to add a phoneprov section to my pjsip.conf for each phone I want to provision. I was hoping the Sorcery page in the wiki would help possibly but it's blank :( https://wiki.asterisk.org/wiki/display/AST/Sorcery -- A human being should be able to change a

Hi, In this thread http://lists.digium.com/pipermail/asterisk-users/2008-October/219592.html , I wondered whether SIPPEER curcalls was working. I could test this anew today. Here are my findings : Alice, Bob and Carol ar all using SIP Phones. Whenever Alice is calling Bob, - if Carol is calling Alice, SIPPEER(Alice:curcalls) equals 0 - if Carol is calling Bob, SIPPEER(Bob:curcalls) equals 1

Hello List I am in the progress of migrating from chan_sip to pjsip. I fear I have missed something on how hints need to be specified for pjsip. For chan_sip I have configured sip.conf subscribecontext = localuser and in the dialplan I set: [localuser] exten => 11,hint,SIP/11 Now if a phone subscribes to '11' this works. Now I try to get the same working for pjsip. I understood

Hi Joshua thank you for the quick reply > Have you checked the Asterisk console when PJSIP is loaded to see if > the endpoint did not load for some reason? Does it show up in "pjsip > show endpoints"? Yes, the endpoint shows up. Endpoint: 11/(scrubbed from mail) Not in use 0 of inf InAuth: 11/11 Aor: 11

Here is what I have in my extensions.conf file now. Trustrcid and sendrcid are turned to "yes" in the conf file. I'm not fully sure how the SIPCalledRPID works though. The example I found seems to try and provide the stuff automatically (id and name), but does the SIPPEER stuff even exist? I think this is probably the right track though. Any insight would be much appreciated.

My Apologies Dovid, I think I misunderstood your request. You don't have the time you need to convert in the format of date string, Instead you have your users entering via DTMF when they want something to happen? On Thu, Feb 13, 2020 at 11:08 AM Dovid Bender <dovid at telecurve.com> wrote: > John, > > From looking at the wiki won't STRFIME just give me what I need based

Howdy, I'm trying to get my feet wet with pjsip using the conversion script mentioned on the Wiki on this page: https://wiki.asterisk.org/wiki/display/AST/Migrating+from+chan_sip+to+res_pjsip I'm using the copy of the script that's included with Asterisk 13 /usr/src/asterisk-13.0.0/contrib/scripts/sip_to_pjsip I assume I run it from /etc/asterisk with the input and output file as