similar to: asterisk stun setup , not using public ip returned by stun server

Using pjsip 2.7.2 on Asterisk 15.5 Really struggling to make sense of translating these old 1.8 SIP instructions into a neat pjsip_wizard conf suitable for 2018 http://wiki.sip2sip.info/projects/sip2sip/wiki/SipDevicesAsterisk#Version-18 In pjsip_wizard.conf, I have the following, which seems to get me registered, and it responds to an incoming call, but I always get this: [Jul 28 18:32:29]

I'm trying to configure sip2sip, which says: http://wiki.sip2sip.info/projects/sip2sip/wiki/SipDevicesAsterisk "Asterisk, is currently unable to handle more that one result for a DNS SRV lookup, and the Asterisk configuration needed for getting it work with the SIP2SIP service is not trivial" It then gives a complex multi-section workaround in SIP. I remember reading there'd be

Hi, I have to create scenario like following, I have 2 sip soft phone.I configured Asterisk server on local network, on Linux.With two soft-phone , local asterisk sever, i able to communicate.Now i have communicate with other network SIP client.For that i have opened account at @sip2sip.info, they provided me credentials.Then i registered one SIP phone to local Asterisk sever and another to

Would greatly appreciate any input into this currently-unanswered question on the forum: http://forums.asterisk.org/viewtopic.php?f=1&t=96496 I posted it on Jan 6th, have tried so many things, so much forum/list searching and late nights since, but have had to admit defeat. Rather than duplicate it all here, I've posted my logs and conf files on that thread, too. Problem is that while

Hello, I cannot call my server over the internet with SIP anymore. Even when I do a maximum logging on my firewall, I don't see packets coming from outside. I've tried it from an ekiga.net account and an sip2sip.info account. What could be wrong? I would expect incoming traffic on port 5060 UDP... The account is "paul at vandervlis.nl". This should connect trought DNS to the

Hello, We have a sip trunk between our voip operator and our asterisk 1.6.2.9 We have no problem during voice communications. But we can not send any t38 fax via this gateway. We tried to trace the error made some tests.. There are 2 main tests we tried to do. As i learned their voip path is like .. we connect to session border controller..then it routes the call to a cisco media gateway if the

I am having a one way audio issue with xlite clients behind NAT. They can connect to the server and make calls but no audio is heard on the other end. my sip conf [general] context=default bindport=5060 bindaddr=0.0.0.0 srvlookup=yes canreinvite=no[tomfmason] type=friend secret=secret callerid="Thomas Johnson" <XXXX> host=dynamic nat=yes canreinvite=no disallow=all allow=gsm

Probably doesn't help diagnose the problem.... but there were also audio problems experienced with this cvs version even on LAN / sip2sip / no transcoding > > ERROR[1171] UTILS.C:509 TVFIX: WARNING NEGATIVE TIMESTAMP -194931. ... > > I will be looking into this issue later today. __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take

Hi Group, Is there any information available for Asterisk 1.8 dimensioning? I googled but couldn't find helpful data for 1.8. I am trying to figure out hardware configuration for following features implemented in Asterisk 1.8? (1)100 SIP clients. (2)ACD (Around 15 realtime queues) (3)Call recording for all SIP clients. (4)4 port PRI (E1). There would be around 100 concurrent calls.

On 5 February 2017 at 05:36, Jelle de Jong <jelledejong at powercraft.nl> wrote: > What do you guys tinc of wireguards, are there advantages? Jason seems to > have a good grip of what he is talking about. Well if it's kernel only, that rules out anything not Linux, at lest at the moment. I know that may have a big share, but I find that limit. I understand it being in the kernel

I am configuring a sip-phone, receing calls, excellent voice quality. but it does not place calls, please, can some one sort out. here is my debug output, and below that is sip-debug, Jul 16 11:34:32 DEBUG[163850]: Setting NAT on RTP to 0 Jul 16 11:34:32 DEBUG[163850]: Stopping retransmission on 'iiasPlzFribMJMcW' of Response 1: Found Jul 16 11:34:32 DEBUG[163850]: Setting NAT on RTP to

HI all! I'm looking for some infos to configure stun server support for a SIP peer. I've installed Asterisk 1.4.3, but searching for stun support in chan_sip (sip.conf) i've found nothing, only a "misterious" externip = stun... But where i have to put the ip of stun server? No infos around Google and forum! :-) Thank all, regards -- Marco Ciacci Asterisk Admin Windows

I have been trying out several stun servers with Asterisk 1.6.0.9 and 1.6.1.0 and I keep getting the following message: [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]:

is there general documentation on how asterisk behaves as a stun client (besides res_stun_monitor.conf) ? e.g.,: * can asterisk use multiple stun servers ? (im interested in availability, not data parity) * what is the relationship between gtalk.conf's stunaddr and res_stun_monitor.conf ? will duplicate queries be sent ? * Does asterisk provide some call (through AMI,

Hello I was wondering if someone knew of an application that could check that the user has a firewall and a broadband connection that will work OK with Asterisk and VoIP. The app would first perform some bandwith + jitter tests, and will then call a STUN server to check that the firewall isn't symetric. BTW, is Asterisk now STUN-capable, or is it still to map ports manually on the firewall

Having some trouble with sip behind a nat. So tried: stunaddr = numb.viagenie.ca in sip.conf. Didn't help so tried stun debug: asterisk*CLI> stun set debug on STUN Debugging Enabled STUN Packet, msg Binding Response (0101), length: 36 Found STUN Attribute Mapped Address (0001), length 8 Ignoring STUN attribute Mapped Address (0001), length 8 Found STUN Attribute Changed Address (0005),

Howdy, I have the following issue and would like to know if anyone has got around this before. IP Phones - Linksys 942 Sip server - Asterisk 1.4.13 Stun server - Vovida Ok heres the issue. We have multiple client phones on their own network behind a natted connection. We have setup the phones to be natted and also pointing to our stun server. Now when the phones make an outside call to the PSTN

Hi, All I have asterisk installed behind non-symmetric NAT, so I have NAT traversal issues. How can I use STUN or TURN to register with the other end? Or Asterisk doesn't support it? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070718/de87a89b/attachment.htm

I'm working on contributing two things for Asterisk 1) STUN suport, this will allow asterisk to detect any NAT firewalls and enable eventual self-configuration with respet to NAT 2) A GNU "autotools" based build system. This will enable developers to make their code more portable and for features to be enabled/disabled as compile time. As a first step

At 7:36 PM +0200 on 5/22/04, Olle E. Johansson wrote: >>[snip] >Sending NOTIFY to Asterisk is an error, but a workaround. Since Asterisk >can handled the NAT traversal all by itself with Qualify (as John points >out) disabling the NOTIFY will not change anything. > >The NOTIFY will in no way affect the status - unreachable/reachable. > >Another problem with the SIPURA is