similar to: samba print server and driver snmp request

Hi all, Is there anywhere an API with the different method and descrption of the different JS of SCRIPTACULOUS ? Thanks for your good work in Prototype and Scriptaculous !! -- Cyril --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Spinoffs" group. To post to this group, send email to

Hi NUT-Users, we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This card supports the RFC1628 Definition. So I think this combination work together with NUT and the snmp-driver, correct? I installed the networkupstools on my Debian Sarge with apt-get (nut & nut-snmp). After configuration I start the upsd and upsmon. I get following output in /var/log/syslog: ... Aug 3

Hi I'm trying to build the perl modules of net-snmp-5.4.2. Everything seems to work fine until "make test"[1]. The problem with "DynaLoader.pm" seems to be an old one. The machine is Centos 5.2 i386 I'm trying to build instead of using the one available in the repos because I'll build in other platforms and also in nagios-plugins. Thanks Marcelo [1]

Hi all, I've been trying to build NUT (latest release source) on a pretty "standard" CentOS (RHEL style) linux box, to monitor an APC Symmetra UPS Unit which powers our server room and broadcasts information via SNMP to appropriate clients. I am having some trouble even encouraging NUT to build with snmp support, which doesn't seem to happen by default. I am curious if anyone

Hello, I'm wondering if anyone else is seeing the same issues I'm seeing here. I have recently upgraded one of my systems from 4.4 to 4.5 and ever since then I cannot get snmp to work. I am monitoring the interface traffic. Please keep in mind the firewall/router I do the same thing without any issues for 4 interfaces and it is still at 4.4 and doesn't have any issues. If I

Hai, ? Im?working on the?print server, samba cups, and so fare, looks ok. ? but im seeing messages like. ? [2014/04/08 08:39:29.804575,? 0] ../source3/rpc_server/rpc_ep_register.c:136(rpc_ep_register_loop) ? Failed to register endpoint 'spoolss'! ? [2014/04/07 16:52:12.100752,? 0] ../source3/printing/nt_printing_ads.c:116(nt_printer_guid_get) ? Failed to get GUID for printer

Hi One idea I've had for some time, but unfortunately not had time to implement, is to add a general SNMP agent, which will work with all UPSes supported by nut. The idea is to have the SNMP agent use the "nut API" to fetch values from the UPS. So the SNMP agent will be similar to the "upsc" utility. Whenever the SNMP agent is queried for information, it will use the

Hello. I'm trying to install NUT 2.2.0 stable. The configure script isn't recognizing my NET-SNMP installation. It exits with a "configure: error: "Net-SNMP libraries not found, required for SNMP drivers" I'm running Ubuntu 7.04 64-bit with NET-SNMP 5.2.3-4ubuntu1 and NET-SNMP daemon 5.2.3-4ubuntu1 along with libsnmp9 5.2.3-4ubuntu1 and libsnmp-base 5.2.3-4ubuntu1.

I've tried looking for documentation on configuring NUT for Ubuntu 12.04 over SNMP with a Tripplite UPS, but there isn't a lot of SNMP configurations tutorials out there from what I've seen. I haven't been able to get automatic shutdown to work. The driver I've been using is usbhid-ups which is generic for Tripplite, but I've reviewed several other UPS driver names and some

Hi all I'm working in a MIB to manage virtual machines using SNMP regardless of VMM manufacturer. To demonstrate this MIB, I plan to insert libvirt functions inside an SNMP agent (NET-SNMP agent). Does anyone know if there is some work using net-snmp and libvirt together, or can give advice about this ? Thanks Hillbrecht -------------- next part -------------- An HTML attachment was

Attempting to install the SNMP driver on Enterprise SuSE 10.0. The version of NUT is 2.6.0. To begin with, I installed the net-snmp and net-snmp-devel packages, using YAST. If I do this command: net-snmp-config --version --base-cflags --libs The result is: 5.3.0.1 -DINET6 -O2 -fmessage-length=0 -Wall -D_FORTIFY_SOURCE=2 -g \ -fno-strict-aliasing -fstack-protector-all -Dlinux \

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Hi!. I recently installed NUT on my servers to monitor a Eaton Ellipse UPS. Now I'm planning my next step: Monitor the UPS status with cacti using snmp. I see that there was a nut snmp subagent (I'm not talking about the nut-snmp driver) (http://www.networkupstools.org/server-projects/). But the current link doesn't work (404). I haven't found anything about it in the web. ?Is

System: * Solaris 10 1/13 (X86) in VirtualBox. OpenCSW packages installed: *gcc4core * libltdl7 * netsnmp * netsnmp_dev I'm attempting to run: ./configure --with-snmp --with-wrap --with-snmp-libs="L/opt/csw/lib l/libnetsnmp" And get the following error: configure: error: "Net-SNMP libraries not found, required for SNMP drivers" I'm pasting the whole

Hello all, I recently started seeing these messages on the consoles of three production Centos 5.2 servers. They have been occurring nonstop for the past few days and show up routinely every five minutes. INIT: Id "snmp" respawning too fast: disabled for 5 minutes INIT: Id "snmp" respawning too fast: disabled for 5 minutes INIT: Id "snmp" respawning too fast:

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

On Aug 8, 2018, at 5:36 PM, Garrett Michael Hayes <Garrett at VerbalImaging.com> wrote: > > I guess I wasn't as clear as I thought I was. > > I am NOT asking about how to monitor a UPS using SNMP. > NUT is already configured and monitoring the UPS just fine on a USB connection. > > I'm asking if it is possible to query NUT, using SNMP, *about* the UPS it is

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

I assume this is the best way to get in contact with the developers of the snmp-ups driver for nut. We have a Liebert AP300 Series UPS with an SNMP Card. I'm trying to write a new header file for nut so we can support our UPS with nut. I've got the driver to compile with Nut 2.2.0 source on RedHat EL v4 and some of the info is correct, but the main thing the power/battery status is not.

Hi all - I'm new to both UPS setup and SNMP on linux - so I'd appreciate any help I can get....I'm stuck! I'm running fedora core 5, and have installed net-snmp and nut. I'm trying to get my network connected UPS to this linux machine. My /etc/ups/ups.conf looks like this: [upsnetwork] driver = snmp-ups port = 172.31.254.7 community = public desc="Network