similar to: lm_sensors and fancontrol

Hi, I have just setup CentOS4 on a system and want to get "fancontrol" working.. I am able to get lm_sensors configured but when I run pwmconfig I am told there are no modules loaded.. What module needs to be loaded for pwmconfig and fancontrol to work? (Board does support PWM in the fans because fancontrol worked on this pc with Ubuntu) TIA

Never used IPMI in my life and while I thought it was cool when I heard about it, had no plans to. Just built a home server (while out of town) using a SUPERMICRO MBD-X10SLM+-F-O I put an nVidia 405 based video card in it but it may be bad. When I power it on, I get some beeps but they are different than the no memory beeps (I intentionally powered on w/o memory to hear those) and I think

I found that lm_sensors got installed because of a dependency on my first Xen VM that I updated to 5.3. lm_sensors doesn't make sense in a VM. I thought, ok let's check after the update who wants it. However: rpm -q --whatrequires lm_sensors no package requires lm_sensors (same for --triggeredby with lm_sensors or the packages below) Trying to remove lm_sensors reveals these packages:

Problem and solution, not sure if correct After upgrading to 5.1 and restarting, lm_sensors complained "General Parse Error." Google pointed here: http://www.lm-sensors.org/wiki/Devices Where I found this under "SENSOR CHIP DRIVERS - STATUS" AMD --> "Since Kernel 2.6.19" Latest AMD K8 processors have integrated sensors which can be read directly without any

I've been monitoring CPU temperature on a few Dell SC1435s running CentOS4 via OpenIPMI and 'ipmitool sdr'. It's been working very nicely, but the upgrade to 4.5 not so long ago seems to have broken something: # ipmitool sdr type Temperature Temp | 01h | ns | 3.1 | Disabled Planar Temp | 04h | ok | 7.1 | 30 degrees C Temp Interface | 53h | ns | 7.1

Hi All, I'm trying to get lm_sensors to work on a Shuttle with an AMD K10. The version of lm_sensors in the main CentOS repo is 2.10.7, which is two years old now. Support for the K10 was added about a year ago. So, does anyone know if there are binaries available for more recent versions of lm_sensors? Also, if anyone has knowledge of the sensors layout for recent Shuttle AMD motherboards,

Hi all, New to the list and (mostly) new to CentOS. We have just moved from running RHEL to CentOS on our main production servers. Anyway, I am configuring a couple of new SunFire v20z servers here at the moment and trying to get the systems' management interfaces to work fully under CentOS. First issue was trying to install the openipmi RPM from the CD that came with the SunFires, this RPM

I've used ipmitool any number of times, but never for more than getting info, or setting the server name on a Dell LCD screen. However, I had a server screaming about intruder alert, intruder alert, er, "Chassis intrusion detected", and I thought there might be a way to shut it up (this after pulling the server and reseating the lid). A quick google found, on the first page, an 8

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Sorry if this has been around many times before, but I've done quite a bit of reading and searching for some type of human readable guide for setting up the lm_sensors for hardware monitoring. I've dorked around with the stuff in the system here, but after looking at the /etc/sensors.conf, I don't think I want to delve into that and try to pull out the right group of settings.

Fred Smith wrote: > On Tue, Jul 11, 2017 at 12:05:55PM +0100, Gary Stainburn wrote: >> I have just installed CentOS 6 i386 onto an old rack server (it's gonna >> be a Bacula storeage server and is a 1U 1/2 depth chassis) >> >> I did a minimum netinstall and so far so good. However, I have one >> problem. >> The CPU fan is going at full speed constantly.

On 05/02/17 21:49, H wrote: > On 05/02/2017 08:01 AM, mark wrote: >> On 05/02/17 06:56, Steven Tardy wrote: >>> >>>> On May 1, 2017, at 8:49 PM, H <agents at meddatainc.com> wrote: >>>> >>>> the computer locks up at random intervals >>> >>> Anything in /var/log/mcelog? >>> Is the "edac" module running?

My Dell PowerEdge T105 running Centos-5.2 has started crashing fairly often (3 times in the last 2 hours). The message on the screen tells me to look at the System Event Log. Is this just /var/log/messages ? I didn't see anything helpful there. As far as I could see, the last messages before the crash were about samba, which is running on the machine. Has anyone had such problems with Samba?

hello, I have problem to install lm_sensors on CentOS 4.5 (Linux 2.6.9-42.ELsmp). I am getting error message "FATAL: Module bmcsensors not found." after I enter "modprobe bmcsensors". I got advice to install http://bmcsensors-26.sourceforge.net/ into my kernel, but I don't know how to do it. Does somebody has experience how to get lm-sensors working on CentOS 4.5 ?

Hey folks, I'm running RHEL 5.3 on 6 boxes - and on every one of them sensors-detect finds nothing. 5 of them are Sun fire 2250 machines, and 1 is Sunfire 4170. Googling and searching this list does not seem to find anything. When I log into the Sun hardware management interface (web interface) I see that it of course is correctly detecting various temperatures of things. But for some

On 05/02/17 06:56, Steven Tardy wrote: > >> On May 1, 2017, at 8:49 PM, H <agents at meddatainc.com> wrote: >> >> the computer locks up at random intervals > > Anything in /var/log/mcelog? > Is the "edac" module running? > Does that model support bundle include any Intel MCA files? systemctl start ipmi ipmitool sel list mark

CentOS Errata and Bugfix Advisory 2012:1309 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1309.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a41983848e162aabb0fe146db72c0aa38189dde131820336cc550c29f2a7cd43 lm_sensors-3.1.1-17.el6.i686.rpm

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 x86_64: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the mirrors: