similar to: Centos 6.5 installer failure w/Adaptec 2400A RAID 10

Greetings all. I'm new to the mailing list. Hope to get to know many of you. I'll jump right in with a recent project. I have a machine with RHEL WS 3 - Taroon; plus dual boot to Win 2000 Pro. The RAID card is Adaptec's 2400A w/128 megs cache, running RAID 10 on 4 WD's. I want to migrate to 5.2 Centos and wipe the NTFS partition. I have the 5.2 Centos DVD. Anyone see any

Hi All, I need to install CentOS 4.0 x86_64 using Adaptec ASC-29320A with HostRAID enabled, but it seems my card isn't recognized. I've tried to install the hardware using driver downloaded for RHEL 4.0 from the Adaptec Website, but still it's unrecognized. P.S. I'm able to install RedHat 9.0 using this card before. Is there anyone have any solution for this? Thanks and

We've got this PC PitStop RAID box (they're so proud of it, there's no logo), and what lspci tells me is an Adaptec AAC-RAID (ref 09) controller. I see there's no F/OSS controllers for it, but when I go to Adaptec's site, the search denies all knowledge of such a controller. I'd like to get the correct one, and I really want an x86_64 version; googling found me a 386 rpm.

Hallo, has anyone a hint how to use an Adaptec RAID 51645 under Centos 7? A volume is created using the controller interface but isn't active under centos. Thanks for hintsts Ralf

Here's the situation. I have a dual boot machine - originally had Red Hat and Windows 2000 Pro. The NTFS partition never did seem to 'get along' with the Adaptec 2400A caching RAID controller. Linux always seemed to like the I2O drivers. I went from RH Enterprise to now running Centos 5.5. Works great! I really don't want the 200 gigs worth of NTFS. Can't I just run

Hello everyone, I'm trying to install the CentOS 4.4 Server CD on old hardware. The hardware is a Dell PowerEdge 2300 with Adaptec 7890 and 7860 controllers. It's the first time I've done a Linux install with hardware RAID. However, I'm having trouble getting CentOS (as well as Fedora Core 6) to detect the SCSI hard drives. When it comes to the part where you choose where to

I have a Supermicro SuperServer 6025B-3V with their X7DB3 mobo. It has an onboard Adaptec SAS RAID controller and has been configured as a RAID1 with two Seagate Cheetah 15k.4 disks. Original attempts at installing CentOS4.4 x86_64 appeared to load the aic94xx driver, but then reported something like "No hard drives found...". I grabbed the x86_64 aacraid driver disk from Adaptec

I know I saw some other posts on this in the archives, but I wanted to see if there was any new information. I have MANY Intel servers (SR1200, SR1300, etc.) that are using the Adaptec 2010S, 2100S, 2110S and 2120S SCSI RAID Controllers. They are currently running CentOS3.4 and everything works great. From what I know, these cards should be able to use the i2o_block driver which is part of the

Am 2019-08-05 12:24, schrieb Ralf Prengel: > Hallo, > has anyone a hint how to use an Adaptec RAID 51645 under Centos 7? > > A volume is created using the controller interface but isn't active > under centos. > > Thanks for hintsts > Ralf That's a pretty old RAID controller. Kernel module support for such old cards have been dropped by RHEL. Check the ELrepo for

We are strategizing a set of backup servers and I have been trying to deduce wha the maximum size of each RAID 5 array should be to match the OS we are using. We are currently running CentOS 4.3 64 bit. We have planned a 2 TB RAID 5 array for testing but we will need to set up several larger ones for production. I have poked around and I see people mention limits like 2TB max file size and 32TB

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I've a HP NETSERVER E800 with 1 disk scsi and two sata disk connected to the 1210sa raid controller. i install centos 4 FINAL with "driverdisk" parameter and i choose the 1210sa driver the server think, but even though it's unable to charge... why? as the scsi driver symbios work fine with other disk... Put aside the original

Anybody using these? Pros? Cons? Drivers for CentOS 5? Config / management utility? -- Florin Andrei http://florin.myip.org/

I'm trying to do an fsck on an ext3 partition but I'm seeing abysmally slow disk throughput; monitoring with "dstat" (like vmstat) shows ~1200-1500KB/s throughput to the disks. Even with 24hrs of fsck-ing I only get ~3% (still in pass1). The filesystem is ext3 running "e2fsck -C0 /dev/sda3" and about 3.7TB on an x86_64-based system with 4GB RAM. e2fsprogs is 1.41.9.

I thought I'd be clever and buy a DVD for 5.2 from LinuxOnline.biz. Well, just got around to trying it with the above results. Does the error mean I have a 'bad' DVD disk image? Please advise. Thanks.

Hi! I've performed a Google Scholar Search using a query, let's say "Frank Harrell", and parsed the links to the EndNote references from the resulting HTML code. Now I'd like to download all the references automatically. For this, I have tried to use RCurl, but I can't seem to get it working: I always get error code "403 Forbidden" from the web server.

Just updated 98 packages on this ole hardware raid 10 box - 5.6 final is running just fine. No problems. THANKS. Ed Westphal

Chris: I can consistently reproduce I/O stalls when running fstress (as found in Autotest) against a six volume btrfs filesystem mounted without options. The volumes are independent disks from RAID controllers, and the test systems are eight core Intel and AMD machines running current btrfs-unstable. The stalls occur at variable times into the runs. The affected system ceases to do I/O

https://bugs.freedesktop.org/show_bug.cgi?id=56196 Priority: medium Bug ID: 56196 Assignee: nouveau at lists.freedesktop.org Summary: Geforce GTX 580 unable to boot w/ nouveau, but works with nvidia proprietary (tested in Arch Linux, Ubuntu, Linux Mint) QA Contact: xorg-team at lists.x.org

My desktop updated without a hitch... well, actually, I ran out of disk space after the download completed, so had to clear some space, but the update process continued from where I left off without a hitch -- and that's hardly CentOS's fault. I've still got to update my laptop, but am a little leery, because I think I've a got a hard drive failing. At any rate, thank you *again*

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card