similar to: Hardware raid health?

On Thursday 02 November 2017 14:10:25 Bowie Bailey wrote: > If you want raid 5 or 6, then you should get a hardware controller. For > raid 1, mdadm should work just fine.? I would suggest trying it before > buying a raid controller.? If it works for you, you save a few hundred > dollars and you have one less piece of hardware to worry about. > > I haven't looked at them in

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

On 1/30/2015 1:53 AM, Gordon Messmer wrote: > On 01/29/2015 05:07 AM, Jatin Davey wrote: >> Yes , it is a SATA disk. I am not sure of the speed. Can you tell me >> how to find out this information ? Additionally we are using RAID 10 >> configuration with 4 disks. > > What RAID controller are you using? > > # lspci | grep RAID [Jatin] [root at localhost ~]# lspci |

On 1/30/2015 9:44 AM, John R Pierce wrote: > On 1/29/2015 7:21 PM, Jatin Davey wrote: >> [root at localhost ~]# lspci | grep RAID >> 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 [Invader] (rev 02) > > to get info out of those, you need to install MegaCli64 from LSI > Logic, which has the ugliest command lines and output you've

On 1/29/2015 7:21 PM, Jatin Davey wrote: > [root at localhost ~]# lspci | grep RAID > 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 > 3108 [Invader] (rev 02) to get info out of those, you need to install MegaCli64 from LSI Logic, which has the ugliest command lines and output you've ever seen. I use the python script below, which I put in

On 2/16/2016 3:23 PM, Zube wrote: > Does anyone know what program can be used to query the RAID status > from the OS for an on-board LSI SAS 2308-4i? the 2308 isn't actually a megaraid, its a simple SAS HBA that has an optional raid mode IF its flashed with IR firmware... this only supports raid 0/1/10. I always(!) flash these with the IT firmware that turns them back into a

I?m running version 2.1.7 under Raspbian Wheezy (and have been for a number of years). I want to allow one of my other computers to remotely issue doveadm commands to my server but can?t seem to find the right way to add an inet listener to permit this. Using ?doveconf -a? I?ve found the default service definition for doveadm-server. So I copied that and added it to the dovecot configuration with

> is there any way with Dovecot to open an admin imap connection and create a brand new mailbox? > With Cyrus imapd I can do this by connecting as the Cyrus admin user and then create a folder "user/newuser at domain.tld". Wouldn't that be dependent on how Dovecot auth worker verifies a user exist and is valid? Such as for one method, database queries. How would Dovecot know

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

hi Tom, i downloaded your speex wrappers and they're really what i'm looking for! i really cannot worry about container support at the moment because i'm working with real-time audio, and hopefully toward VoIP when everything else is in order. im using waveform to capture data from the microphone. the raw PCM sample is stored in the WAVEHDR structure's member lpData, and this

On 2/2/2015 10:32 AM, John R Pierce wrote: > On 2/1/2015 8:25 PM, Jatin Davey wrote: >> >> On 2/2/2015 9:25 AM, John R Pierce wrote: >>> On 2/1/2015 7:31 PM, Jatin Davey wrote: >>>> >>>> I ran your script and here is the output for it: >>>> >>>> Start of the Output*************************** >>>> [root at localhost

On Tue Feb 16 03:35:06 PM, John R Pierce wrote: Thanks to both you and Mark Roth for chiming in and thank you for the lsi-raidinfo script. > On 2/16/2016 3:23 PM, Zube wrote: > >Does anyone know what program can be used to query the RAID status > >from the OS for an on-board LSI SAS 2308-4i? > > the 2308 isn't actually a megaraid, Right, that is in agreement with both

Got a new box I'm trying to set up. I configured the RAID from the firmware, but "fast initialize" was sitting there at 0% (it's about 43 or 45TB). The first time I tried this, I said background, and rebooted the system. And the stupid annoying alarm started up as the system came up. This time, having *finally* figured out how to set up hot spares from the WebBIOS, I suspended

Hi, I have an Alteon in test (a sip/rtp load balancer). This Alteon sends to the asterisk box a "SIP OPTIONS" to know if asterisk is alive. However, asterisk sends me a 404 message and not a response like, for example, a Thomson (200 + SDP) I wrote a very little script (you can find it at the end of the email) to send an Options message to asterisk/phones to try. It works

On Jul 1, 2019, at 7:56 AM, Blake Hudson <blake at ispn.net> wrote: > > I've never used ZFS, as its Linux support has been historically poor. When was the last time you checked? The ZFS-on-Linux (ZoL) code has been stable for years. In recent months, the BSDs have rebased their offerings from Illumos to ZoL. The macOS port, called O3X, is also mostly based on ZoL. That leaves

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

Hi All, I was hoping to pick someone''s brain about the best way of moving a Xen disk image (which has LVM''s inside of it) to a new block-device?  I have the target DRBD device ready but unsure what''s the best &amp; safest way to do it. I was actually tempted to mount the Xen disk image in a dom0, and make it visible via loop devices and promote that DRBD node for

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID