similar to: NetworkManager

My computer has reported failure to even launch the NetworkManager.service (I am unsure if that is the FreeDesktop.org service that I must have enabled in order to connect to WLAN and Bluetooth radio frequencies). After a system reboot following the installation of the official QEMU 9.0.0 commands and upgrade path from QEMU 6.2.0, I no longer have access to WLAN or Bluetooth management. I have

After a long time of trying to get the network working between a linux dom0 and a windows xp domU, I found a hint in the README.SuSE (in the document folder /usr/share/doc/packages/xen of the SuSE rpm-package), that there are problems using bridged mode of xen together with networkmanager. Switching off the networkmanager indeed solved the problems. Are there any patches / workarounds to get

Well I think we all need to look at something like this first. We will be one of the first people in Europe who will be selling this. If anyone is interested do drop me an email. Picture of the phone can be found here. http://cyber-telecom.net/wifi-gsm.jpg GSM / VoIP Over WiFi Dual-Mode Phone CYBER-TELECOM released the world first commercial GSM/VoIP Over WiFi dual-mode smart phone, in

tinc 1.0.19 worked fine on Raspberry Pi as long as my Pi was connected via ethernet cable. Today i changed the connection to wlan. Pi crashed. worse, it was no longer operational, even if connected via cable. recovery from backup before tinc was installed (yes, i had a backup ;) tried again. installed tinc: worked as long as connected via cable. crash after connecting via wlan. no longer

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

Hi, i want to ask about sip.conf & extension.conf the configuration. is it possibility to make sip.conf configuration like this [1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org] type = friend context = tutorial username = 1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org secret = 12345 host = dynamic and the extension.conf like this exten => 1510891531557268 at

Hi All, I Am new to Wine, and I try to get Office 97 to work, but the M$ Office installer dosen't work yet. Se bug 150 on:

Hi! I have some problems with an bridge between wlan0 and eth0 device... It works and I can from both sides ping the router with the bridge device but I cant ping the devices from other net so I cant ping wlan devs from eth net and other way around the wlan card is an atmel usbw11 from linksys and eth is a intel e100 10/100mbit nic I have configured the bridge according to the how to and

Hi! We have an installation with WLAN SIP phones only. Sometimes we have connection drops. What is the best way to debug if we have problems with the WLAN or the SIP devices or the uplink to the IAX Provider. TIA, Mike

To all, I have a firewall with 3 NICS. eth0 connects to the Internet eth1 connects to a wired lan eth2 connects to a wireless lan In my rules, I would like to create a zone loc which encompassed eth1 and eth2 and create 2 sub-zones: lan for eth1 and wlan for eth2. Because I only want to open what I need on that firewall and because that firewall is also used for different services (I know

Hi all, let me see if I can explain my problem in an explicable way. I have written a WLAN driver which runs on a dedicated box (e.g. not a PCMCIA card). The box is plugged into a client that wants WLAN connectivity via Ethernet. E.g.: [ ] Ethernet [ ] RF/WLAN [ Laptop ]------------------[ WLAN adapter ]------------- [ ] [ ]

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I found out problems with dynamic add of hosts to zones. If somebody has idea how to fix it, please do tell. My head is not working on this on properly. Hope you get idea from this message. I''m trying to simplify this as much as possible to get problem clear. Problem is: Zones: vpn wlan net Interfaces: net eth0 wlan eth1 Policies: vpn all

Hi Folks, I'd like to install my USB-WLAN-Stick Netgear WG111v3. Ndiswrapper works correct after installing Kernel-Modules from atrpm ndiswrapper-kmdl-2.6.18-53.1.19.el5.centos.plus-1.52-16.el5.i686.rpm. But by calling wpa_supplicant with wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d machine freezes. My wpa_supplicant.conf:

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at:

Hallo, can I use pxelinux for booting a notebook via WLAN? Viele Gruesse! Helmut

I intend to realize the connection to the Internet by WLAN (at the presen time DSL cable modem). The WLAN DSL-Router should not be the problem. But which wlan- adapter (internally (PCI), USB... whatever) can be recommended for a work "out of is the box" with cent OS 5? Thx Timothy

[desktop] ----- lan ----eth0 [notebook] eth1 192.168.?.? ` ----- wlan ---- [speedport(hub and router)] -- internet 192.168.2.x So on my laptop I have eth0 beeing lan, eth1 beeing wlan ethernet card. When only using eth0/1 everything is fine. Now I want to be able to use internet from both [desktop] and [notebook]. Typically you set up a bridge with

Dear list-members! I am using OpenWRT (www.openwrt.org) on two accesspoints. Within OpenWRT, the wireless interface and the ethernet interface are bridged to one interface (br0). Those two accesspoints are standing quite far from one another. Their WLAN-cells do not cross each other, meaning I have an area in between the two accesspoints, where there is no accesspoint of the two accessible: a

On 04/26/2015 06:31 PM, Peter Larsen wrote: > On 04/26/2015 07:26 PM, Robert Nichols wrote: >> How can I block network setup (via NetworkManager) from changing >> the machine's hostname whenever the network configuration changes? > > Make it a system connection instead of a user connection. Or give the > host a static name on install and don't allow dhcp to override

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface