similar to: HP ProLiant DL380 G5

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct?

I have two openvz servers running Centos 6.x both with 32GB of RAM. One is an Intel Xeon E3-1230 quad core with two 4TB 7200 SATA drives in software RAID1. The other is an old HP DL380 dual quad core with 8 750GB 2.5" SATA drives in hardware RAID6. I want to figure out which one has better random I/O performance to host a busy container. The DL380 currently has one failed drive in the

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Hi all, I''ve a Xen server (Xen 3.1 compiled from sources [stable downloaded last wed...], CentOS 5 as the host OS, HP Proliant G5 6Gb ram with Broadcom NetXtreme 2) with 4 guests, each running Windows 2003 just installed, with nothing else. Network is configured with the default bridging script, no changes. I''m using 1 network card only for the moment. All guests run apparently

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP

Hi, i have a proliant dl380 g5, with an amd as1000. I try to install centos8 with gui, but when try to start the new installed system, the xserver don't start. There is a throuble with the amd es1000 driver. This grafic card, seems not supported more from amd. I need a minimalistic gui for study for rhcsa certification. The gui is mandatory for the exam. Any help? Paride

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Hi folks, We use CentOS 5.2 (with latest errata) 64bit on DL380 G5 and trying to install psp-8.11.rhel5.x86_64.en.tar.gz. After installing dependencies (like kernel-devel, rpm-devel, etc): # ./install811.sh Saving user-defined agent thresholds... [ Done ] Checking system for required packages... [ Done ] ./hpplduioss: error while loading shared

This may or may not be ext3 related but I am trying to find any pointers which might help me. I got a number of HP Proliant DL380 g5 with a P400 controller and also two qla2400 cards. The OS is RedHat EL4 U5 x86_64. Every time during reboot these systems panic after the last umount and I believe before the cciss driver is getting unloaded. The last messages I am able to see are: md: stopping

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

I've been seeing some random Proliant DL380 G4 64bit crashes. Each time, on the console are messages relating tojbd2/cciss and something about a waitfor 120 seconds. Is anybody else seeing anything like this? Oddly, I can't seem to find this in the logs. I guess it can't write when this happens. -- John Hinton 877-777-1407 ext 502 http://www.ew3d.com Comprehensive Online

I setup a CentOS 6 server to use with KVM/QEMU, and I am getting the following error a good bit, granted it doesn't seem to be causing any trouble. I figured I would post and see if anyone has any ideas on the issue, or if I can just dismiss it. If I look at my logging/dmesg, I see: do_IRQ: 19.217 No irq handler for vector (irq -1) do_IRQ: 3.178 No irq handler for vector (irq -1) do_IRQ:

Hello List, i downloaded centos6 x86_64. With DVD-iso1 i made a booteable usb-stick (universal usb installer 1.8.5.7). When i boot my HP ProLiant DL380 G4 from the stick, the CentOS boot screen comes up and and the message "Automatic boot in xx seconds..." appears. * When i do not hit any key, the seconds are counted to zero an then it starts again at 10 seconds - again and again. *

A customer is looking to replace or augment their Sun Thumper with a ZFS appliance like 7320. However, the Thumper was used not only as a protocol storage server (home dirs, files, backups over NFS/CIFS/Rsync), but also as a general-purpose server with unpredictably-big-data programs running directly on it (such as corporate databases, Alfresco for intellectual document storage, etc.) in order to

Greetings, Can anyone relate experience(s) installing CentOS on Compaq rack mount servers units please? Easy no problem, easy some issues, or ghastly do not do it under any circumstances... ;) Basically, I'm looking at some used/refurb dual PIII units and will run RAID on Compaq built in SCSI or is it easy to pop in some 3ware SATA in them? Let me know in terms of CentOS 3 and/or 4 please.

Hi, i''am trying to build a Gentoo Dom0-kernel booting a HP DL380 G6. Has anyone twiddled a working kernel configuration for this hardware? i do have the linux-2.6.32-xen-r1 sources checked out by portage and tried some configurations. Olaf _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users