similar to: Dual boot with 2 drives

Hello, I want my CentOS 6.5 computer to have a static IP. Currently I get the IP I want because I have my router assign it on the basis of mac address. I placed the following file as: /etc/sysconfig/networking-scripts/eth0 DEVICE="eth0" BOOTPROTO=static HWADDR=00:1F:D0:9E:AE:67 ONBOOT=yes TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes NETMASK=255.255.255.0 IPADDR=192.168.0.99

Hello, I want to build a lightweight server and install centos. Does anyone have a recommendation for a suitable motherboard? Thank you, Joe

Hi, I just installed Samba on my Centos 6.4 computer. Smbstatus says my version is 3.6.9-151.el6-4.1. My smb.conf file only has a [global] and [homes] section. My configuration works, as expected, from a Win7 Virtual Box computer and a Win8 Virtual Box computer. I can see the share from the Windows file explorer and can map the share to a network drive. The Samba server is not virtual.

On Thu, Feb 20, 2014 at 9:39 AM, Joseph Hesse <joehesse at gmail.com> wrote: > Hi, > I am having interference with my neighbouring wireless networks. > Is there a linux tool that enables me to monitor the ESSID, channel, > power output and other information for neighbouring wireless networks? > I am especially interested in the channel so I can choose a different one. >

I am running Wordpress on a CentOS 6.5 server which is behind a router. The private IP is 192.168.0.99, the public URL is X.com (name changed). I have two virtual hosts in my httpd.conf file. The second one, listed below, is for Wordpress and it is accessed with http://X.com/d4i or http://www.X.com/d4i. They work fine. Actually, not show, I have more Wordpress virtual hosts, and they are

Hi, I am trying to update my system with yum and I keep getting this error message. Thank you, Joe Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * epel: fedora-epel.mirror.lstn.net * extras: centos.mirror.lstn.net * rpmforge: mirror.hmc.edu * rpmforge-extras: mirror.hmc.edu * rpmforge-testing: mirror.hmc.edu *

I am running a Lamp server on a CentOS 6.5 box. It works fine, I am concerned that I may have the wrong file/dir permissions. The directories /var and /var/www are root:root and 755. For /var/www/html and all directories underneath I have apache:apache and 770. For all files under /var/www/html I have apache:apache and 660. Are these these permissions OK? Thank you, Joe

I use an external USB drive and rsync to back up everything in /home. The USB drive has an entry in fstab and I mount it with "# mount /mnt" The rsync command I use is: rsync -av --delete --include='.thunderbird' --include='.filezilla' --include='.putty' \ --exclude='.*' --exclude='Desktop' --exclude='VirtualBox*' /home/* /mnt/home/

Hello, I am using wireless N on a DLink-655 wireless router. It is the "A" hardware version with the latest firmware. I am using a channel that no one in my vicinity is using, according to iwlist. I checked the Statistics from the router web interface and they are shown below for a period of less than an hour. It looks like the errors are excessive, especially the "RX Packets

Hi, A consultant, long gone, set up postfix, dovecot, amavisd and squirrelmail for my wife. It works fine but my wife wants to change the server name from old.com to new.com so the name is more appropriate for her business. My approach would be to use sed to change all occurences of old.com to new.com. Specifically, I used grep to identify the following files where I should make the changes.

Thomas Schmitt wrote: > I ponder whether it would be possible to create a diagnostic MBR > which does not necessarily have to boot but rather tells what the > isohybrid MBR would perceive: Presence of partition table, > EBIOS or CBIOS, block address used with INT 13, content of the block > read by the first INT 13, ... ... > The diagnostic MBR should only use 432 bytes because at

> > Looks like a disk sector to me too. However the partition table > is further on. See: > > https://en.wikipedia.org/wiki/Master_boot_record#Sector_layout So that reference says the "classical generic MBR" partition entry # 1 is offset 0x1BE. Which in this image is right in the error strings (?) section. 00000170 13 59 5A 58 72 09 40 75 01 42 03 5E 0B E2 CC C3

> > The appliance kernel couldn't find any partitions at all on the disk. > > Is it a raw format disk image, or some other format that qemu can > reasonably be expected to read? I used the "Advanced Options" of Macrium Reflect (on Windows 7) to do a raw byte copy. If it is, then yes I'd say the image is corrupted. However you'd > probably want to hexdump

In my Cent OS machine, I have 3 hard drives, an 80, and two 200gig hard drives. One of the drives is obviously starting to fail, but I'm not sure which one. Is there a command line command in Linux that will check the drive integrity on all the hard drives and tell me which one is going bad? Thanks Jim

Hi, funny or enlightening observation: With my qemu-system-i386 it would work if the detected Heads/Cylinder and Sectors/Head factors would change positions ! The effective read operation seems to use H/C = 32 , S/H = 63. The correct LBA would be addressed by H/C = 63 , S/H = 32. -------------------------------------------------------------------------- Reasoning: I have transplanted the

Hi, Because of heavy interference in the 2.5GHz range in my neighbourhood, I want to switch to wireless dual band (5GHZ) and wireless ac. Do you have any suggestions for USB wireless adapters for CentOS 6.5 that work with dual band and ac? Also, if you have any suggestions on wireless routers for these bands I would like to hear about them. Thank you, Joe

I'm having trouble installing CentOS-7 on my HP MicroServer. I've tried with KDE LiveCD and Netinstall (both on USB sticks), and now I'm going to try with the DVD ISO. But I want to be quite sure I can return to CentOS-6.5 if things go wrong, so I'm wondering what precisely I need to copy (eg the MBR and a bit more) so that I could get back to things as they were. Is this

From: Christian Hesse <mail at eworm.de> Both files can be used, so mention both in error messages. Signed-off-by: Christian Hesse <mail at eworm.de> --- dh.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/dh.c b/dh.c index 4c639ac..450f5c4 100644 --- a/dh.c +++ b/dh.c @@ -153,8 +153,8 @@ choose_dh(int min, int wantbits, int max) if ((f =

Christian Hesse <list at eworm.de> on Tue, 2013/10/22 13:14: > Christian Hesse <list at eworm.de> on Tue, 2013/10/22 12:56: > > Gene Cumm <gene.cumm at gmail.com> on Tue, 2013/10/22 06:35: > > > On Tue, Oct 22, 2013 at 5:41 AM, Christian Hesse <list at eworm.de> wrote: > > > > Hello everybody, > > > > > > > > iPXE builds

Hello everybody, setting up a netboot server for a really huge network I decided to go with what will be syslinux 4.10 to get support for http transfers. The setup works on my notebook, booting another notebook directly connected. However it fails with a more complex setup: A virtual machine on the second notebook bridged to the ethernet device does not boot, systems from other networks with a