similar to: VPN address of the remote host

I'm trying to figure out how exactly v2.0 should be parsing configuration files. The most annoying part is if it should always just "use whatever comes first in config" or try some kind of a "use most specific rule". The "most specific" kind of makes more sense initially, but then you start wondering how to handle e.g.: 1) User logs in to imap from 192.168.0.1.

Hi Jeff, Thanks for your reply! Regarding grouping by remote address, I understand and for now I'll keep a close eye. Maybe it's an option to group by /24 for ipv4 and /64 for IPv6? We currently do that based on the logs but the OpenMetrics endpoint seem a lot easier. A slight hijack of the original question: but I tried to log only IP addresses (+ result) of failed login attempts but

Hi to everybody, I want create a VPN with some PC clients and only one server, instead of LAN-to-LAN, but I'm not very sure how to do this. For example, I need to have: - Server LAN -------- (192.168.0.1/24) ---- tinc-VPN ---- (192.168.100.1/24) - Client-01 LAN --- (192.168.50.1/24) ---- tinc-VPN ---- (192.168.100.10/24) - Client-02 LAN --- (192.168.80.1/24) ---- tinc-VPN ----

Hi, I am setting up a dovecot instance to host a bunch of virtual domains, with ldap backing for auth. I am using a single hostname for test purposes, with a couple of entries in the diectory. If I use auth binds I get a result, but this does not suit the end purpose of the server. If I use ldapsearch with the same base, search filter, and credentials as the ldap auth config I get the correct

On 9/13/2016 10:00 PM, Edgar Pettijohn wrote: >> I'm attempting to capture a core-dump file, and gdb reports >> > >> > warning: core file may not match specified executable file. >> > > I believe this means the core file doesn't match up to the executable. I would delete the core and try to reproduce with your new executable then run gdb with a core

On Mon, Dec 08, 2014 at 11:02:24PM -0500, md at rpzdesign.com wrote: > The self contained example is tricky because I created 4 ip-address on > the eth0 device (192.168.1.30/31/32/33) so I could test a 4 node VPN > that lives entirely within a single server. That's quite hard to do, it's far easier to run four instances of tinc on four different ports on the same machine. >

Hello All, I took a break from trying to get Tinc working and have come back to it now with the release of 1.0.11. I have 2 Windows computers connected behind firewalls and everything seems to be correct, except I cannot seem to get any data past the server TAP interface. I can ping the Server TAP interface from the client, but no data will move through the TAP interface to the Internet. I have

Hi, with the latest dovecot-ee version (2.2.25.4 (5cb7c97)) if I run ?doveadm quota recalc -u alessio at skye.it? dovecot return a ?Segmentation fault? (but the quota is update fine). Since dovecot version 2.2.24.3 (55cdc32) works fine. This is my quota backends configuration: plugin { quota = maildir:UserQuota quota2 = dict:Quota Usage::noenforcing:proxy::sqlquota } dict { sqlquota

Hi All, I am trying to setup the site-to-site VPN with TINC for connect my home network to company network. Here is the IP allocation and configuration for your reference. Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, 10.0.0.1) ?----------------? INTERNET ?-------------? COMPANY (Windows 7 PC,192.168.2.1, 10.0.0.2) ?------------? COMPANY (SERVER ZONE) ?----? SERVER A

Hi all, After having read most of the available documentation I still have got problems interconnecting two networks in router mode: My configuration consists of two private home networks that I want to connect: Vienna 192.168.0.0/24 - Internet gateway 192.168.0.1 Berlin 192.168.1.0/24 - Internet gateway 192.168.1.1 VPN Devices are configured as 192.168.3.1 (Vienna) and 192.168.3.2

Hello, I have been reading through the documentation and trying to set up a very small VPN as a test for a larger rollout that I would like to complete in the future but cannot get this working. The configuration seems like it should be relatively simple, so I'm most likely missing something basic but I just cannot see what I'm doing wrong. At the moment I am trying to get this working

Hello; I was reading the message "how to config dovecot for multiple domains, multiple SSL certs, and conditional IP access -- with passwd-file passdb?", and i was wondering if Dovecot could support the SNI extention of TLS ? SNI is Server Name Indication where during the TLS negotiation, the client set the name of the server it tries to reach I dont know if any imap/pop client

Hi, after trying for days I ended up with a working tinc configurazion of 2 subnets, now my goal is to add 2 more subnets and comunicate. I might seem dumb at this point but honestly I don't work in IT or Networking stuff, and so I dont have that deep knowledge. A little explanation of my configuration is HOST A (VPN server) Public IP: 1.2.3.4 tun0 Subnet = 192.168.10.0/24 tun0 IP =

I am not sure if this desired feature or not but when we are behind a local proxy ie. Nginx/Varnish then the new ShowException middleware doesn''t seem to properly detect the remote IP address and it appears as if every browser gets a local error page with a stack trace, etc. I''ve opened up a ticket on the rails bug tracker but I also would like to verify that this is in fact a

Hello there, I have been trying to make the patch work for libwrap(TCP Wrappers) posted on http://dovecot.org/patches <http://dovecot.org/patches%20Patch%20of%201.1> Patch of 1.1 but could not get it work. Any help will be highly appreciated. After compiling and running it I get error "Error: login_tcp_wrappers can't be used because Dovecot wasn't built with

Hi folks, Sorry to trouble you all - I'm having some trouble getting tincd up and running - I suspect I'm having problems with subnets. Any help would relaly be appreciated! At the moment I'm trying to get two linux boxes, both of which are running as NAT routers for their respective networks to talk. My goal is to allow staff to connect to the corporate network from their laptops

Hi, Being a beginner with Tinc I browsed the mailing list archive in order to see if other people were experiencing the same problems as I was. And there is. But the answers given to them never actually seemed right to me (at least regarding what it is said on tinc's website). My problem is that in order to run a simple VPN between two machines I had to manually add the "route add

I just found that the VPN Netmask option in the pfSense tinc GUI is related to the "netmask" option in /usr/local/etc/tinc/tinc-up ifconfig $INTERFACE 192.168.117.1 netmask 255.255.0.0 What exactly is this line doing? Is it assigning the address that my lan adapter has to the tunnel interface as well? I'm interested in using tinc in production, so I'm trying to learn as much

My intention is to set up tinc so that I can connect from home to an office network. All CPUs are running MacOs X, 10.2.8 or 10.3.5. I have read the tinc manual, tincd.8 and tinc.conf.5. However, I am still unclear about a few issues. First and foremost, how to I setup the VPN interfaces on the hosts, on MacOs X? Which file do I have to alter and what is the exact syntax on Os X to setup

Me and my son are running Tinc over 5 nodes, 3 of them got public address and we using them as server. Each node has its own Lan subnet 192.168.0.0/24. Originally we ran network on Openwrt routers with Tinc many years without any problem, but due to limited RAM on routes and change of one router to not Openwrt supported model, we decided to transfer Tinc installation on Raspberry Pi-s in LAN. In