similar to: asterisk multiple ip

Hello everybody: Here is my "network layout": ISP1 ISP2 | | | | +-----eth0---------eth1------+ | | | FC 3 box | | | +-----eth2---------eth3------+ |

I have a rather unusual setup within which I'd like to run samba. At this point I have: a) 3 networks (all private IP's) b) net1, net2 are interconnected by a router. net1 has a host that also acts as a WINS server and is local master, domain master, preferred master for it's group. (linux slack7.0, samba 2.0.5) router between net1, net2 has an IP in each network and samba

Hi, I can''t get traffic shaping working. This is my situation: -------- ------ Net1 ----- |router| -------------------- | TC | ----------- Net2 -------- leased line ------ eth1 eth0 We use the leased line for normal traffic but also for synchronisation between 2 servers. The leased line is 2mbit. The synchronisation

Hi all, I need my servers to decide which network they are in (i.e. dmz), and the only clue is the servers IP-address. I was trying to accomplish it like this, but it doesn''t work: case $ipaddress { "10.1.1.*": { $network = "net1" } "10.2.2.*.*": { $network = "net2" } "10.3.3.*": {

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

I have managed to get it set up so that I can now use net commands to mount shares from my linux box onto my windows box. But I still don't see an icon for my linux box on the network niehborhood. I have waited and waited and tried what seems like everything but can't get that stupid icon to come up. Any ideas??? Scott

Hi, I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly. Just one link works at time, and is always the second in the command ip route add default table 222 proto static. Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian''s one (2.6.18-3-486), same results

I have both cable and dsl service. The router attached to the cable service is 192.168.0.1 and the router attached to the dsl service is 192.168.0.254. I determine which service my computers communicate through by setting the gateway assignment to either of those addresses and it just works. I can connect to my computers from the outside by port forwarding from my routers to the computer that I

A CentOS 6.3 box ("host") runs several KVM virtual machines, each of which has two interfaces attached to the two bridges br1 and br2 (and each thus has two IP's; one on 192.168.0.0/22 and one on 192.168.4.0/22); net.ipv4.ip_forward on the host is 1. Simplified diagram: host +---------------+ |

I have a router with 3 network interfaces like in the following ASCII diagram below. All interfaces are 100mbit. There is tcp traffic being sent from net1 to net3 and from net2 to net3 and the tcp connections consume as much bandwidth as possible. There is a pfifo queue on the egress interface eth0 of the core router with a limit of 10 packets. net1 --> (eth1) router (eth0) -> net3

​The qemu that I am using isn't modified at all. It's the VHOST drivers that are mounted elsewhere i.e., not on default /dev/vhost-net. Here is the command that I use to launch my qemu VM: qemu-system-x86_64 -cpu host -boot order=c -hda /root/Disks/ubuntu1.qcow2 -m 1024M -smp 2 --enable-kvm -name 'client 1' -nographic -vnc :2 -net none -no-reboot -mem-path /dev/hugepages

Hi all, i got the following configuration: * NET1: DSL Line with /28 network, let''s call it 10.1.0.0/28 * NET2: DSL Line with /28 network, let''s call it 10.2.0.0/28 * INTNET: Internal Network with productive servers and workstations, 192.168.1.0/24 Obvisiously the 10er networks are official networks but censored to protect my customer. The routerbox assigns on eth0 all

Ahi Ole, An hany site. http://blogs.msdn.com/b/servergeeks/archive/2014/07/12/dns-records-that-are-required-for-proper-functionality-of-active-directory.aspx greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Ole Traupe > Verzonden: donderdag 12 november 2015 15:33 > Aan: samba at lists.samba.org > Onderwerp: Re:

Hi all, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090722/30afa9ee/attachment.htm

Hi all I''m new to this list, but not exactly to iproute stuff. I''d like to solve a specific problem with bandwidth coming from different external sources towards the internal network (also the other way around, but I figure that''s not so much a problem, since that is egress traffic shaping). The network looks like this: internet ------ ISP-------[shaping/router]

Thanks Wangkai but libvirt infact pre-configures network tap devices and pre-opens /dev/vhost-net file and passes these to qemu as open, ready to use file descriptors. My issue is that my qemu requires that /dev/vhost-net directory is removed and it's kernel module be unloaded. Then it creates a vhost -net device using its own configuration. On 24 July 2014 07:35, Wangkai (Kevin,C)

Hi, Tinc experts I’m on-boarding for Tinc for just quite a few days, and trying to setup the connection between one client to multiple server, where multiple vpn tunnels from the client to different server. From the documentation, it indicate the tinc.conf can support multiple ConnecTo, also the tinc can support multiple netname, like /etc/tinc/net1, /etc/tinc/net2. My question is, for my above

Am 12.11.2015 um 11:22 schrieb Harry Jede: > On 11:06:29 wrote Ole Traupe: >> Hi, >> >> I tested the AD (Samba4) domain log-in on Windows 7 clients and Linux >> member servers with my PDC being offline (plugged the cable). It is >> not working so well. >> >> On Windows it initially takes forever. It works again after rebooting >> the client, which

I would like to do a case statement based on different vlans. If a person does a case statement on $ipaddress provided by facter, can you match regex expressions such as case $ipaddress { "192.168.1.[0-9]+": do something "192.168.2.[0-9]+": do something else } Also, would this best be solved by a case statement or other functionality within puppet? Thanks

hi, i''m trying move from file: based disk to tap:aio but things don''t work i have centos4 dom0 with centos4 domU xen 3.0.4-testing changeset: 13138:d401cb96d8a0 self compiled [root@xen linux-2.6.16.38-xen]# grep XEN_BLKDEV_TAP .config CONFIG_XEN_BLKDEV_TAP=m config disk = [ ''file:/var/lib/xen/test.img,hda1,w'',