similar to: Asterisk IP7960 and MWI Issue

May I please ask again for some assistance with the question below? I hope somebody can help me. Thanks, Ed Greenberg -------- Original Message -------- Subject: Re: [Puppet Users] Using custom facts in Puppet Date: Tue, 16 Nov 2010 13:14:06 -0600 From: Ed Greenberg <edg@greenberg.org> Reply-To: puppet-users@googlegroups.com To: puppet-users@googlegroups.com On 11/16/2010 09:33

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hi list, how does one get a SNOM 200 MWI to work with * ?? When I press the MWI button it doesn't connect with voice mail on my * box. thanks

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and

I have a large group of 7960G's running Asterisk 1.2.4 using SIP 7.5. Most of the time the message waiting indicator works fine. Once or twice a day either an MWI is not sent to the phone or the phone misses it. I have not noticed duplicates being sent and I can't figure out the time, if any, a resend is made. Anyone know why I'm missing, loosing or not sending an MWI to the

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

We've been testing (aim:frziegler and aim:end1r) the Voicemail2 app for a few days now, based on a CVS build from Monday, 5/12/03-23:15. Works good! Thanks Mark! We seem to have found a bug in the MWI (Message Waiting Indicator) logic. By simply creating msg0000.txt files in both structures, e.g.: for extension 4000: voicemail1: /var/spool/asterisk/vm/4000/INBOX/msg0000.txt

On 27.12.18 at 18:14 Joshua C. Colp wrote: > On Thu, Dec 27, 2018, at 1:07 PM, Michael Maier wrote: >> Hi! >> >> I just want to say, that 13.24.1 doesn't fix the problem described in >> the posts above. > > You're going to need to file an issue[1] with traces and actual configuration. > > [1] https://issues.asterisk.org/jira > Before I'm

My cell vm goes to asterisk, not the carrier. Apparently MWI is turned on/off with specially formatted SMS messages. Anyone know how to do this on a Treo 600? Having the phone light from Asterisk would be HUGE ... not to mention extremely cool. dbc.

Hi, I have VoiceMailMain on extention 1001 so it would be nice to get that sent to the phone instead of asterisk@[IP Address] when there is a message waiting.. Is it possible to change the extention that is sent to the phone when MWI is lit up?? Thanks.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by

Hi all, I'm having sudden MWI problems. Everything else on the phone works fine though. I have three Cisco 7940s. Asterisk server is behind a firewall running NAT. (192.168.1.202/24) Phone #1 - On the same subnet 192.168.1.250. Everything works great. Phone #2 - On a different subnet, 192.168.2.0/24. Everything works fine except the MWI. It never comes on. This is over an IPSEC VPN, but

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

Hi ALL, After upgrade 1.8 my MWI wasn't working I do have setting in voicemail.conf. Do i need to do anything else to fix my MWI on polycom 501 ? It was working with 1.2 asterisk. pollmailboxes=yes -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110608/e1f59a92/attachment.htm>