similar to: BLF and notifyringing in Asterisk 11

Hello list, I read this in sip.conf : notifyringing = no ; Control whether subscriptions already INUSE get sent RINGING when another call is sent (default: yes) What does this mean ?! Does this mean that when I mark this as "yes", a phone that already has taken a call will be send a second and third call ?! I want that if a phone is in use (calling), the phone does not

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

" Hello, I have been trying to get my Grandstream GXP2000 phones to stop showing ringing state on monitored extensions. But no matter where I put notifyringing=no asterisk still sends the ringing state to the phones. Is this a bug I should report or is there another way around it. Here is how i have my subscriptions setup: extensions.conf [demo] exten => 6100,hint,SIP/100 exten =>

Hi, I set verbose to 3, but I do not see any RINGING notification in the CLI. On the contrary, when the phone goes UNREACHABLE I get: [Dec 13 21:10:06] NOTICE[9988]: chan_sip.c:25533 sip_poke_noanswer: Peer '152' is now UNREACHABLE! Last qualify: 130 == Extension Changed 152[blf] new state Unavailable for Notify User 154 [Dec 13 21:11:08] NOTICE[9988]: chan_sip.c:20196

Asterisk can know that one of the attached phones is both "ringing" and "on the phone". However the sip NOTIFY it sends out to interested parties can only communicate one state, for example with pidf+xml it can either send "Ringing" or "On the phone" and so it sends "Ringing". This makes the "busy lights" less than useful, if a call

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Dear all on a debian amd64 i've installed (from source) asterisk 1.4.30 On the system we have in average 50 concurrent calls in queue and 40 sip members. I'm experiencing an apparently random problem: sometimes some users receive 2 calls from asterisk, apparently ignoring the ringinuse=no settings. It appears on users that are members of many queues As you can see from the log, the

Asterisk 11.1.0 One queue with strategy=leastrecent. (Full queues.conf below.) Occasionally (several times today), a caller will get "stuck" in the queue - there are operators available to take the call, but the caller stays in the queue for a long time. Any idea what might cause this, or where I can start looking to debug it? I'm going to start digging through the queue log

Hello With 1.4.23.1, I can't really see any difference between setting this value to yes or no. Can you explain ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090304/ccf0f222/attachment.htm

Struggling with an IP650 and 7 IP335s this morning. I have the following hints defined (courtesy of FreePBX 2.9): extensions_additional.conf:exten => 300,hint,SIP/300 extensions_additional.conf:exten => 301,hint,SIP/301 extensions_additional.conf:exten => 302,hint,SIP/302 extensions_additional.conf:exten => 303,hint,SIP/303 extensions_additional.conf:exten => 304,hint,SIP/304

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI> sip show subscriptions Peer User Call ID

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Hi, I use asterisk 1.8. My issue is : I have the same SIP members added to two queues. I use realtime configuration and has set the field ringinuse=0 for both the queues. But if an extension is answering the call in one queue, and some new call comes in the second queue, still that extension is ringed. In the queue_log table I am getting RINGNOANSWER events each second for the extension until

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

Hi List, I have faced a problem in asterisk queue implementation. I configured a queue with 'ringall' strategy and 'ringinuse=yes' in queues.conf. If three calls come to this queue in parallel, the logged in queue agent used to get only one call (may be the first one), not all the calls waiting in the queue at a time. Once the agent answers the call the next call is displayed. I

Dear all, I've implemented BLF for use with some Grandstream GXP-2000 phones and it works fine in 1.2.x versions of Asterisk, although I tested it with version 1.4.0 and it doesn't work! Has the needed syntax changed for configure BLF for this version of Asterisk? It it a bug of this version? Or should it be misconfiguration that I'm doing? Thanks, Ricardo.