similar to: Multicast RTP

I am using 11.17.0 - and MulticastRTP. Doesnt seem to work with polycom phones as other devices receive my multicast just fine. Is there something special to do to get multicast working with polycom phones? (other than enable multicast on the actual phone). Thanks Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings everyone, I was wondering if there was a way to change the codec that Asterisk uses when streaming via MulticastRTP. Or perhaps a way to transcode the multicast stream. In the CLI, when I have a multicast stream in progress, I am typing 'core show channel MulticastRTP/0x7f7........' to get lots of helpful information. I have noticed that when I do a MULTICAST page and send data

Hello everyone, A month ago I took on an issue on the Asterisk issue tracker (https://issues.asterisk.org/view.php?id=11797) dealing with multicast RTP paging. This is the ability to send audio to phones (the phone must support it) and have it played out the speakerphone. Using multicast RTP is great for this because it does not incur the cost and weight of setting up a potentially short call.

I am using a cyberdata "sip paging adapter" and with the Dial(MulticastRTP/basic/IP:port) and with tshark I see the RTP data, my device looks like its accepting the data and I hear a click for my relay on my device so it would seem its accepting the call, however - I hear no audio... Asterisk 11.11.0 is what I am using. What might be wrong here? Thanks, jerry -------------- next part

HI Guys, I am trying to use the RTPPage application on asterisk 1.4 using the Snom 320's?? My goal is to do the paging using a multicast IP address. I tried the app_rtppage.c and i can only do unicast on the snom's and i was unable to do a multicast. https://issues.asterisk.org/view.php?id=11797 http://svnview.digium.com/svn/asterisk?revision=101218&view=revision My dialplan

Hi everyone, I am sending out a multicast page using the following in my dialplan: Page(MulticastRTP/linksys/${MULTICAST_IP_ADDR}:6061/${MULTICAST_IP_ADDR}:6061,q) Everything works great, but I had a question about SIP and SDP: Should I be seeing a SIP/SDP message from the asterisk server containing media information and the multicast IP address? On wireshark, I see SIP/SDP from the admin

> I am using 11.17.0 - and MulticastRTP. Doesnt seem to work with > polycom phones as other devices receive my multicast just fine. > > Is there something special to do to get multicast working with polycom phones? > (other than enable multicast on the actual phone). Didn't see if anyone had answered you or not on this, but Polycom uses their own form of MulticastRTP. It

Hey, I have a few dids with callcentric. They seem to work fine most of the time but at some points I get "handle_request_invite: Failed to authenticate user <sip:PSTNnumber" This happens intermittently. The way I understand it the insecure=port,invite should tell asterisk not to authenticate users coming from that host. But its not working for some reason. This is my sip.conf

Hello there, I appreciate any help about this problem that I can't figure out... I need to record all my calls: this is pretty easy using Monitor() before the Dial(). eg: exten => 425,n,Monitor(wav49,/var/spool/asterisk/monitor/425/${EPOCH}_${CALLERID(num)}_in,mb) exten => 425,n,Dial(${PHONE1},10) Now, I want to create a call group: I mean, I want a number (eg 800) that makes

I have an asterisk 11.4.0 server with two interfaces, eth0 and eth1. Eth0 has a default gateway on it, eth1 is connected the subnet that has my phones registered. I'd like to use the multicastRTP driver to do paging. However, when a phone dials an extension with multicastRTP, the multicast stream goes to the primary interface (eth0) and it really needs to go to eth1. Is there a

I've had years of experience using ODBC for CDR, SIP, and extensions with Asterisk. One thing that has been problematic in the past is with documentation as far as database tables changing between versions (even within minor releases, though that was back in the 1.4 days). I was excited to see there is a plan for better managing that on Asterisk 12 via Alembic. All that being said, are

Hi, I would need to bridge a SIP call with a multicast RTP channel. Both sides are receiving and transmitting RTP. Googling, I saw that an app_rtppage, which was in the SVN for a while and its not there anymore. It did, I think, only partly what I need (it sent from SIP to the mcast ... not the other way around), but it was a start. Any idea how to do this? I also could use

Hi all, Does anyone know of a method of sending a raw G711 stream to an address in Asterisk. For example, an application that takes a argument of a phone and a port. The reason? I have found a method to paging on Zultys ZIP2 and ZIP4x4 handsets. Basically it involves sending a stream of RTP data to port 3771 to multicast address 224.0.0.1. Would it need to involve me writing my

Hi List, Merlin Magix hardware v02 I'm trying to get asterisk to act as a voicemail server for a lucent merlin magix PBX that we purchased used. We have 4 FXO channels between the two PBXs on a Sangoma A200 card. The 770 dialgroup is working properly, in that calls to 770 are answered by Asterisk. The magix is sending mode codes in the format #XX#XXX#, where the 2nd block of digits

Is there a recommended way to find out the cause of DIALSTATUS = CONGESTION for PRI/BRI channels? Currently I am evaluating the DIALSTATUS variable and I also count the active ISDN channels for the ISDN trunk in question. Counting the active ISDN channels seems somewhat clumsy as the mapping to a specific trunk must be done by hand (or write even more code). I have a setup where outgoing calls

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

The Asterisk Development Team has announced the release of Asterisk 13.11.0. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk The release of Asterisk 13.11.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following are the issues resolved in this release: New

https://bugs.freedesktop.org/show_bug.cgi?id=78441 Priority: medium Bug ID: 78441 Assignee: nouveau at lists.freedesktop.org Summary: X does not start under kernel 3.13.x QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: aebenjam at opentext.com

In my * box I've configured two queues and incoming number and whenever any one calls those number call comes to my *box and it sends call to my agents in queue. but if no agent is available it still answer the call. Is there any why when my agents are not available I don't want call to get answered. Here is my dialplan: exten => xxxx,1,GotoIfTime(*|*|20|dec?ccagents,xxxx,6) exten

I'm building a paging system composed of roughly 10 switches in daisy chain, with an embedded box with a speaker and a microphone for each switch. The embedded box runs my software. I need the system to be resilient to any network partition, so that anyone can send announces from any mic to all the reachable clients. I'd need also to page a subset of all the speakers. I'm