similar to: handset forwarding Diversion header cannot be set on Local channels

Hello! I want to thank everyone who helped me out with tips for load balancing asterisk machines in a cluster. I have encountered a new problem that is related to SIP diversion headers in the INVITE. I make calls through the manager interface and now want to add a SIP-Diversion header that changes the CallerID of a number that is not available on the trunk, the CallerID to be visible externally

Hi, Is anyone aware of SIP Diversion header ? It seems currently supported by Comverse (formely NetCentrex) softswitch and some hardphones (Thomson ST2030). An old draft (draft-levy-sip-diversion-08.txt) mentions this header. ha I'm wondering if this could be used -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Richard Thank you > You need to set more redirecting information [1]. > > In sip.conf send_diversion=yes needs to be in effect. You also need > to setup > the from party id information (at least the from number) to indicate > where you > are redirecting from. You should also increment the redirecting > count. > > Richard > > [1] >

Hello, Is there any way to identify an incoming session based on the Diversion header? In my scenario, I have some unregistered endpoints (mobile phones) that make calls through our Asterisk, which controls the external call rights based on the endpoint's context. In a normal call, their number will be in the From header and the destination in the To an RURI, but when they make a call

Hi out there To play the correct announcement in app_voicemail I whould be able to read the SIP Diversion Reason which ist sent by another PBX: Invite contains: Diversion: <sip:+41315995003 at 157.161.10.190>;reason=no- answer;privacy=off;counter=1 Asterisk Logs: RDNIS for this call is is +41315995003 (reason no-answer;privacy=off;counter=1) From what I see in the source of chan_sip

Hi all, I’m trying to rewrite Diversion header when call forwarding is done on the phone. The phone sends "302 Moved Temporarily" response and sets Diversion header to a local number, but before Asterisk sends this call towards TSP provider I need to change Diversion header to a full PSTN number. I am using PJSIP_HEADER in a pre-dial handler (configuration is below). On the same

Hi Folks, This is a totally off-topic diversion that I thought people might find fun. I've been working on a small parser framework that I'm integrating into Obversive to provide code analysis of R scripts and stuff. It is still a work in progress, but the parser currently can parse R code and produce an XML output file representing the Abstract Syntax Tree. I thought it would be

Minor update - use the following: > if (strcasecmp(data, > "x-Asterisk-Request-URI-pseudo-header")==0) > { > ast_copy_string(buf, p->initreq.rlPart2, len); > -----Original Message----- > From: Steve Langstaff > Sent: 23 October 2006 09:58 > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [asterisk-users]

Hello List Next question where google did not spit out an unsable answer. When redirecting a call with Transfer, I would like to correctly indicate the reason. I did try this: exten => XX,1,NoOp(Call to ${EXTEN} from ${CALLERID(all)}) exten => XX,n,Dial(SIP/ZZ) exten => XX,n,set(REDIRECTING(reason)=cfb) exten => XX,n,Transfer(SIP/YY) I did try with 'reason'

Hi, After a long discussion with a friend, I would like to ask here: 1.According SIP RFCs, is possible/recommended to have different values in >From and P-Asserted-Id fields ? For instance, From field showing 123456789 and P-Asserted-Id showing 987654321 (beside privacy considerations) ? 2. When Bob forwards to Cory a call coming from Alice, would expect Diversion/History-Info header to

2018-06-05 15:27 GMT+02:00 George Joseph <gjoseph at digium.com>: Thank you very much, George for replying. > > > On Tue, Jun 5, 2018 at 3:35 AM Olivier <oza.4h07 at gmail.com> wrote: > >> Hi, >> >> After a long discussion with a friend, I would like to ask here: >> >> 1.According SIP RFCs, is possible/recommended to have different values in

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile

Hi Ian, thanks a lot for this information. I have forwarded this also to the "pkg-xen" team, because there is some real progress in bringing xen3 to debian. It might be interesting for them too. regards, Ralph Am Mittwoch, 1. M?rz 2006 16:57 schrieben Sie: > Because I didn't feel like compiling my own libc and then maintaining > the resulting system, I wrote a script to

Hello, I'd like to find a way to probe a SIP phone for forwarding information before I actually Dial() it. For instance, if an absent user entered a forwarding number in his (Cisco or Polycom) phone, it will anwser a Dial() with a REDIRECT and asterisk will comply if the context allows. However I'd like to intercept that REDIRECT, get the number and use the telco's call deflection

Hello, AFAIK the feature CD (call deflection) is only possible on point-to-multipoint links, is this correct? I've heard about the feature "partial rerouting" which should do the same on point-to-point-links. Is this implemented in either bristuff or chan-capi(-cm)? Thanks in advance, Karsten

I'm playing with phone ci$co 7941 with sip image (8.02SR1), strange is, that phone displays caller id number with ip address of asterisk server like "8210@172.20.24.11" I think, this is some bug in firmware, but I would like to find some workaround, maybe using SIP_HEADER function, but seems, that this can be used only when calling from SIP to SIP, i.e. not possible to use

Hi all, i do have the following setup ISDN BRI Line -> openVOX Card/Asterisk 1.6.2.6/libpri 1.4.11.2 -> Dialplan Dial DAHDI -> ISDN PBX -> ISDN Equipment The user on the ISDN Equipment das enable call forwarding - Teilrufumleitung / Call deflection - so that call will get forwarded by the telco switch - and not using b channels. The forwarding request is coming in on asterisk (i

Hi! Anyone got a patch for call deflection for Zaptel/libpri drivers? Thanks! /hanna -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080415/c69ecdd2/attachment.htm

--- Daniel Aleksandersen <aleksandersen+xiphlists@runbox.com> wrote: > Hi list, > > I am trying to compile and install flac 1.2. I $ ./configure(d) and $ > > make(d) without any errors or warnings. However I get the following > error > when $ make check(ing): > > > Testing 24-bit full-scale deflection streams... > > fsd24-01 (--channels=1 --bps=24 -0

On 2007-09-15, Josh wrote: > --- Daniel Aleksandersen <aleksandersen+xiphlists@runbox.com> wrote: > > Hi list, > > > > I am trying to compile and install flac 1.2. I $ ./configure(d) and $ > > > > make(d) without any errors or warnings. However I get the following > > error > > > > when $ make check(ing): > > > Testing 24-bit