similar to: fromdomain not honored on outbound INVITE request

I have an Asterisk 11.5 system, using SIP Realtime and operating as a ITSP. One of my customer's endpoints is a NetVanta 7100 PBX system that has a SIP trunk connection to my Asterisk box. The NV 7100 has a public IP on it that doesn't have any NAT between it and my Asterisk system. When the customer transfers a call from one handset to a voicemail box, the NV 7100 sends a RE-INVITE to

Asterisk 1.2.7 RedHat 9.0 I frequently have the need to redirect calls that come in on a DiD provisioned by my ITSP, back to the ITSP so that they can terminate the call on the PSTN. For example when an external call comes in, I often have to send it to a cell phone. I believe that this is referred to as "hairpinning" the call. I do this by answering the incoming call and then I use

Asterisk 1.2.7 RedHat 9.0 I frequently have the need to redirect calls that come in on a DiD provisioned by my ITSP, back to the ITSP so that they can terminate the call on the PSTN. For example when an external call comes in, I often have to send it to a cell phone. I believe that this is referred to as "hairpinning" the call. I do this by answering the incoming call and then I use

Many ITSP are using loadbalancers, so if somebody registers on a sip peer with specific dns host, an incoming call may be received from a different ip and the host value in peer section doesnt match, so it will go to default context. For example Telekom or 1&1, biggest providers in Germany are using too many different addresses that its not practical to define them all (up to 50 hosts

I'm going to try and ask this again and keep it short and as too the point as I can while still providing enough info to be of use. PLEASE advise if I am going about this wrong or asking too much. I'm seriously doing my BEST to throughly read the docs and try a bunch of things BEFORE coming here to ask and possibly annoy. If is documentation that explains thsi process in terms that

I have an ITSP we are trying to work with that has an "Unusual" way of working, but that said my understanding of their behaviour is that it is fully RFC compliant. Can someone suggest how I might be able to interoperate under these circumstances: We register fine with them, and send the default asterisk Contact: header of: Contact: <sip:s at x.x.x.x> This then causes ALL

Is there a way to override the fromdomain specified in the sip.conf and instead set the value from the dialplan? If we use: Set(CALLERID(num)=user at domain.com The SIP From header turns into: user at domain.com@10.10.10.10 We want user at domain.com, and we can't have an entry in sip.conf for every provider. -- Eric Chamberlain

Hi All, When I want use Asterisk as a PBX to cooperate SIP ITSP, I can not set the caller ID, so SIP ITSP do not accept the call. In Asterisk, I set a account in sip.conf to register on ITSP SIP Server: register => 6292@218.1.121.237/6292 And I added a user 6292 in Asterisk just like the account on ITSP SIP Server: [6291] type=friend username=6291 callerid=6291 host=dynamic

Asterisk 1.2.7 Redhat 9 I have DiDs from two different ITSP both set up as IAX2. Each one works when it's the only one in my iax.conf, but when I have them both defined in iax.conf at the same time, only one will work. My iax.conf is provided below. Any ideas how to fix? I'd like to use both DiDs! Thanks, H My iax.conf is below. When I dial the DiD provided by ITSP_B, the other

Hello list, my CLI is spammed with : [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:47] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:48] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:49] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep

SetUp: - Asterisk behind a NAT, - Red Hat 9.0 - Asterisk 1.2.14 My Asterisk box is behind a NAT and I have a DiD from an ITSP. I have my dial plan set up so that when outside callers dial the DiD, the call is answered by my auto-attendant. The caller can then select who they'd like to speak to and the call is transferred to the external line associated with that person (usually a mobile

Great ! I'm gonna it try ASAP ! Is there another way (ie not using different ports) to get several trunks to a given ITSP ? Let me explain this a bit further. My setup is: ITSP <---- SIP----> Asterisk <----> Phones For various reasons, I want my Asterisk box to have several trunks/SIP account with my ITSP. First method, is to configure a specific port for each trunk: ITSP will

Hi folks I have a handset talking to Asterisk, which in turn puts the call through to an ITSP. The handsets likes to send audio in 40ms frames (even though Asterisk requests 20ms frames with a ptime header in the SDP). The ITSP doesn't request any particular frame length (with ptime) or state a maximum length (with maxptime), so when Asterisk receives the 40ms media frames from the handset,

On Fri, 2019-03-01 at 14:15 -0500, Joshua C. Colp wrote: > you can try line functionality on the outbound registration which > may or may not work[2] (requires the upstream to adhere to the RFC, > which not all do). My provider seems to implement this. However even with the line=... in the: SIP to address: sip:5555551212@<my_IP_address>:5060;line=dpnlyiu res_pjsip is still

We are using using what Cisco's Port Address Translation, so that all SIP traffic is done through %EXTERNIP%. ?To any outside box, it should look like the asterisk server is actually on %EXTERNIP%. My SIP packet gets sent to the ITSP with a Call-ID: 2fd557964ca936b66661d72f1328c918@%EXTERNIP% , but the SIP 200 OK reply from ITSP has Call-ID: 2fd557964ca936b66661d72f1328c918@%INTERNIP%. ?I can

Has anyone found an ITSP that will relay T.38 fax to an asterisk 1.6.x instance AND do it reliably? If so, I can think of a number of locations with copper loops that could be scrapped. I'm actually quite surprised at what an underwhelming number of ITSP's that say they support T.38 (zero so far among my normal go-to companies). For locations that just want to be able to send

Hi - I am looking for suggestions for ITSPs for faxing with asterisk 1.8. We are based in the US, so would need an ITSP with US DIDs. #1) We would like to use Fax For Asterisk with asterisk 1.8.4 in order to receive faxes via T.38. Sending faxes is not a requirement. Does anyone have a working asterisk 1.8.4 configuration and ITSP provider that they can recommend? We have been trying T.38

Integrics is pleased to announce the release of ITSP version 1.6. This version has the following new features: - Comes in 2 editions: * Carrier edition, for 250 to tens of thousands of users on hosted systems. Integrics sells this edition directly and through partners. * Office edition, for 10 to 250 users. This edition is sold only through our partners, for them to sell as PBX systems at

On Thu, Jun 18, 2015 at 1:26 PM, Matt Riddell <lists at venturevoip.com> wrote: > Did you buy the number from your carrier? Maybe it?s set on their side > for the trunk. > That's what I think too, but they are denying this. I think what's happening is they have a customer service guy interpreting logs (probably incorrectly). When I had a Century Link POTS line, I had a