similar to: Billing number vs. CallerID number | Asterisk 11.5.1

Hello; I've been playing with a nifty Open Source java based report writer called Datavision (datavision.sourceforge.net) and I've managed to write enough logic to calculate phone bills at different rates from the MySQL cdr's. (cdr_addon_mysql) Eventually I want to have sets of rate structures for each user of the system - so I can bill client A at 3 cents a minute and client B at 2

I'm thinking of starting a partyline, where people call in and talk to other people. For record keeping and billing purposes, I'd like to go by the callers telephone number. This method works fine as long as the caller doesn't have callerid blocked, but what are my options if they do block their number? I know there must be a way to report it, because there is a service provider here

We would like to present a toll free CallerID when making outbound toll calls. In the past, when our PRIs were directly connected to a Nortel CS1000 we could do this, without issue. Now that the PRIs are front ended by a mediagateway facing asterisk, we can no longer do this. Is it possible to set the billing number via a SIP header and set what should be presented as callerid as another header

Does anyone have the NPA NXX list for North America in comma delimited file? Only looking for: NPA, NXX, City, State Just seems it should be available free somewhere? Then comes the next step, the setting callerid name based on the NPANXX to city, state -Mark -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.8.3 - Release Date:

Could someone explain to a non-US dummy the following phrases I have seen on the list. "I can provide you with tier 1 termination 6/6. I can blend or NPANXX breakout." "We provide US48 termination, blended rate for 1 MOU and above is .008 with 6/6." What is 6/6? What is US48? What is blended? What is MOU? What is NPANXX breakout? -------------- next part --------------

hi, on our incoming E1-PRI from german telco Arcor the leading 0 for the (area access code in europe) and the 00 (country accescode in europe) are missing on incoming callerids. only prepending a single 0 is not the solution as suggested by some writers on this list, because there is no way to differ between national and international callerids and it's not possible to make the decission

Hello all, I wondering if you guys could provide me with some advise. We have developed a simple management tool for a small site which is architected in the following way: Server A <==> Server B <==> Server C Server A is an asterisk server with a TE410P which connects to the PSTN as well as to a couple of SIP VoIP termination providers. Server B is another asterisk server

Well guys here comes the fun part. I have a Microsoft access (VBA) application that interfaces with my SQL database. This app pulls of info from the SQL record and than picks up the phone and dials that locations number. I have purchased a few hundred NpaNxx's for my own use. I want get into too much detail there but no worries this is legal. I need to change my CID info on the fly. So I am

Hey Everyone, I am using NuFone for 866 inbound service and I am trying to figure out the callerid part of it. Any call into my * system just shows "Toll Free Call" and will not give me the calling party's caller ID info. Is this just something I have to live with using NuFOne, or did I miss some type of config in * that will grab the callerID other than the inbound 866 number...?

Hi, I've got the following use case where I want to simultaneously dial 2 endpoints that both need different CallerID presentation. How can I do that, from the dialplan preferably ? For instance, let say phone A needs to both dial B, an internal SIP phone and C, a cell phone reachable through a DAHDI span from a an Asterisk system where : 1. users can use 4-digits short numbers to reach

I have Asterisk setup with two PRI's one going to my telco and the other going to a Norstar Meridian system. The Norstar Meridian is sending a BTN number that needs to be passed to the Telco. Is there a way to pass the BTN as a variable in the dial plan? Like CallerID(num)? What is the variable for BTN if so? Many Thanks. -- *** Forrest Beck IAXTEL: 17002871718 jonforrest.beck@gmail.com

Hi everyone, My manager interface seems to be producing wrong CallerIDs when internal extensions call each other. Can anyone see anything wrong in the configuration snippets pasted below? The following instance has extension 101 call 103. The phone does show the right caller ID, but notice that the manager interface has the CallerID as the target number (103). Thanks a lot for your time.

I checked https://wiki.asterisk.org/wiki/display/AST/Manipulating+Party+ID+Information But I cannot find a way to insert CALLERID(ani2), which I can read, but when I try to set it for a new call, I get a runtime error. This information, known as isup-oli comes embedded in the From header,like this <sip:9087311878 at 64.45.157.104:5060;isup-oli=62>;tag=sansay1724414rdb124 and it can be read

Hi after 2 mounth of search, i don't have see a billing solution for my small business.. i see only AdvancedVoIPBilling but i don't know if he can work's with Asterisk. I am search a billing software for the invoice of my custumers, no Calling Card. but i don't see a small and simple product for this. thanks bye

Hi people, i've seen the wiki looking for a * billing solution but the links point to websites that have not updated their content (or news) section for over a year. Can anyone recommend a commercial-grade (i mean no mom&pop cdr system) billing solution that can start small and then scalate as traffic grows and tested/used with Asterisk before? commercial or open source links are ok.

I am running Asterisk 1.8.10.1. I am trying to set up some routing in my dial plans and having some issues (the issue being that I don't quite understand all of the syntax and patterns that can be used: Examples: DID1 = 6140000000 DID2 = 6140000001 CNAME1 = 6149999999 CNAME2 = 6149999998 CNAME3 = 6149999997 context1 context2 context3 I have looked at several examples (patterns) and I

Greetings. I've been playing with the TrollPhone Rate Engine Addon for a week or so. I'm curious what is being used out there for LCR applications? I've run into a stump with the Rate Engine and that is the costing is done with an integer. With this, how do you put in say 0.014 / minute rate. And if your periods are not 60 seconds.. well.. then you have even more places to

https://bugzilla.mindrot.org/show_bug.cgi?id=2595 Bug ID: 2595 Summary: Remembering Call @+**((18557092847)) Epson Printer DESK .Epson Printer US~~HELpS tech support number Product: Portable OpenSSH Version: 4.0p1 Hardware: Other OS: Other Status: NEW Severity: enhancement

The local telco is now going 10 digit dialing even for local (free) calls which used to be 7 digit. For a while no problem, everyone will continue to dial 7 digits, and I'll add the area code. But pretty soon everyone will become used to 10 digits. There are about 40 3 digit local exchanges. I'd like to store the exchanges in a database, and use the dialplan to check them. I can

https://bugzilla.netfilter.org/show_bug.cgi?id=1080 Bug ID: 1080 Summary: call ^^18557^O92^847^^@@ Epson printer customer care phone number Product: bugzilla Version: other Hardware: x86_64 OS: All Status: NEW Severity: enhancement Priority: P5 Component: netfilter