similar to: ConfBridge 11.7 and 11.8

I have used every asterisk 11.8.X version. Have not had an issue till 11.8.0 and 11.8.1 When I use ConfBridge I am attempting to put all participants in MUTE mode and just one talker... However, since 11.8.0 I am hearing feedback in the announcement like the channel is not really muted. I dropped back to 11.7.0 and I hear no feedback. Has something changed - or - am I not correctly setting up

To all: No matter what I try, I cannot get the system to wait for the admin to join. It just dumps users into the bridge directly. I do not have a pin for users, does that matter? What am I missing? Another issue the absolute timeout is not working ? ... have recordings that last for over 24 hours... and this should not happen... All calls should hangup after 4 ? Any ideas ? Any help is much

Is the new conf bridge going to be in 1.8? or only 1.10? Jerry

I believe I am running an AGI (to put users in a conf) before the confbridge is built. So the users are not really get in the conf... exten X,1,run agi to put users in conf exten X,n,ConfBridge() How do I have in the dial plan ConfBridge() and someplace run an AGI that brings the users I want into that Conf. I cannot delay in the AGI and wait for the conf because the conf is not built until I

I have a confbridge in asterisk 11. I am using an AGI to bring people in the conf automatically. I want to speak a "pre-recorded" wave file message into the conf to all users. how might I do that? Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA

Hi All, We are currently evaluating the confbridge application while we prepare to upgrade our environment to asterisk v1.6.2.x. We have run in to two issues using it to kick/mute participants in a bridge and would like to ask for the experience of others running the application for any work-arounds. Firstly for kicking participants, would it be possible to use the softhangup application

Putting a whole bunch of people into a listen-only/muted Confbridge conference or getting the broadcaster audio into a MOH class and then just having callers attach to that MOH class? Does the the muted side of a Confbridge Room still try to mix in audio from the muted channels or does it just disregard those channels and only run mixes against unmuted channels? Now, if the answer is

I'm looking at what would be involved in converting from MeetMe to ConfBridge and there seems to be a lot of missing administrative things, but I hope I'm just missing it. We all know about the missing realtime linkage. That's a major nuisance, but can be worked around. More serious is that the CLI command to display users in a ConfBridge don't show the caller ID information, so

A very nice feature of another conferencing system that I've used is that the admin/moderator can press a star code to MUTE ALL OTHER USERS on the conference. This is great if you have several people on the call and one of the people puts the call on hold (and so the music/advertisement/your call is important/etc) message starts, or someone's cellphone handsfree unit in their car is

I use both confbridge to bring several devices into a receive only or listen mode, then allow the one person on the phone to speak live over those devices. Works great. However - now I would like to be able to "play a tone" into the conference before the person speaks. How might that be accomplished? Thanks, Jerry -------------- next part -------------- An HTML attachment was

We upgraded from asterisk 11 to asterisk 13. Recordings were working fine in 11 but nothing is being written on 13. Here is the dialplan segment same => n,ExecIF($["${TL_PHONE_CALL_RECORD}"="TRUE"]?SET(CONFBRIDGE(bridge,record_conference)=yes)) same =>

I'm trying to migrate from MeetMe to ConfBridge: [conferences] exten=>_8[1-9],1,Answer() ;;exten=>_8[1-9],1,Meetme(${EXTEN},1Ms,1234) exten=>_8[1-9],2,ConfBridge(${EXTEN},1Ms) exten=>_8[1-9],n,Hangup And that works. Also changed the hints: ;;exten => 81,hint,MeetMe:81 exten => 81,hint,ConfBridge:81 ;;exten => 82,hint,MeetMe:82 exten => 82,hint,ConfBridge:82 ;;exten

running Asterisk 1.8.9.0-rc2, what are the ways to interface with ConfBridge ? I see the CLI command 'confbridge' documented for asterisk 10, but i dont see how to interface with confbridge on 1.8 What I'm trying to do is keep track of conferences that are used. I tried something like the below, but not only does Confbridge not return, but i'd need something that erases the

Hi All, I want to set the video_mode of the confbridge dynamically in the dialplan. SO say if 5 users join the conference with follow_talker mode, it should work like that (and it does). But if 6th user changes the video_mode to first_marked and gets marked in the dial plan and joins the conference, he does not become the single video source of the conf. The video mode stays follow_talker. I

I have a confbridge setup that feeds the conference from the ALSA microphone input (this is the conference leader) and then uses app_ices to send the conference audio to icecast. I start the conference leader like this: console dial 1000_admin at conferences I join the ices user to the confbridge with a call file: Channel: Local/1000 at conferences MaxRetries: 2 RetryTime: 60 WaitTime: 30

Hi All, I am working on Asterisk 12.6.0 with ConfBridge module, when there are multiple user like admin and normal participant running with conference. When I try to kicked 2 user (Normal User), it play file "conf-kicked" and again join conference My scenario in confbridge like. 1] Admin User (e.g. SIP/8484-00000000) 2] Normal User (e.g. SIP/8484-00000001) 3] Admin User (e.g.

Hi list! ConfBridge dtmf_passthrough=no doesn't seem to have any effect. DTMF gets transmitted throughout the conference. I've tried Asterisk 10.7.1 from the official RPMs and 10.8.0 compiled from source. I've confirmed that it's disabled via the CLI "confbridge show profile user <profilename>". It's an all-SIP scenario with RFC2833 as the DTMF protocol.

Hi guys How can I record the confbridge only when after a marked user is logged in to conference ? Is there any option on the confbridge to start recording when marked user is logged in instead of when the first user logs in ? I tried setting up "same => n,Set(CONFBRIDGE(bridge,record_conference)=yes)" before sending marked user to the conference but it won't start the recording

We have a product that uses Asterisk via AMI. I am relatively certain we used to be able to play prompts by actions like the following to make asterisk play the confbridge-join prompt when a new user joins the confbridge. However, that doesn't seem to work now. Action: SetVar ActionID: C58 Channel: PJSIP/1003-00000003 Variable: CONFBRIDGE(bridge,sound_join) Value: en/confbridge-join Does