similar to: Asterisk 12 - 100rel (Prack) no 100rel Require in responses

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Dear all, I'm trying to receive a call from a VoIP provider to my Asterisk which is behind a router, with a port forwarding (5060). This configuration has already been validated with another VoIP provider, but in the present case, not. I suppose (thanks to the sip trace) my asterisk is not able to answer a call which need Prack. My asterisk answer : ' SIP/2.0 420 Bad extension ...

hello I want to know how to pass through 100rel header. and I hope that asterisk PRACK to UAS.(RFC3262 behavior) _________________________________________________________________

On 06/14/2017 at 10:17 PM, Joshua Colp wrote: > On Wed, Jun 14, 2017, at 05:09 PM, Michael Maier wrote: > > <snip> > >> >> I can now say, that asterisk / pjsip seams to work *mostly* as expected. >> Just one exception - and that's the package in question, which can't be >> seen in tcpdump. >> >> I extended the above patch by adding

OK, it stopped working. It turns out the transport and endpoints in PJSIP are ok. I can send an invite from my unregistered snom phone and I can see some activity in the CLI. However, when I dial from my snom to Kamailio and have it pass the message to asterisk, PJSIP seems to ignore the sip messages even though they are there. Is there something wrong in the invite that I'm missing? U

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

The PJSIP endpoint is configured for ulaw only. Not sure how or why we are seeing the g729 on calls for this endpoint. Would this be a case that asterisk detects the rtp stream is g729 even though it's negotiated as ulaw? Why would asterisk change the format to g729 when disallow = all and allow = ulaw are the endpoint settings? [121] type = endpoint context = IS transport = transport1 aors

Today I faced a problem. Please help to solve this problem. Asterisk 13.7 (chan_pjsip) & Zyxel Keenetic Plus DECT, firmware v2.06(AAGJ.9)C1 Outbound call from Zyxel Keenetic (pjsip endpoint) to PSTN (pjsip trunk). Call using early media (183 Session in progress) and rtp_timeout=10. After 10 seconds: [2016-12-16 13:53:15] NOTICE[6654] res_pjsip_sdp_rtp.c: Disconnecting channel

On Mon, Jun 5, 2017, at 04:26 PM, Michael Maier wrote: > On 06/05/2017 at 06:29 PM, Joshua Colp wrote: > > On Mon, Jun 5, 2017, at 01:22 PM, Michael Maier wrote: > >> > >> Do you have any idea where to start to look at? Adding additional output > >> in the source code? Which functions could be interesting? I may add own > >> debug code to see why things

Le 09/09/2016 ? 18:32, Madushan Geethanga a ?crit : > Hi, If you're not using RTP encryption did you uncheck the option in your RTP TAB from identity ? > > This is the log. ex dialling 0 from snom phone > > > <--- Received SIP request (1230 bytes) from UDP:123.231.72.210:33878 > <http://123.231.72.210:33878> ---> > INVITE sip:0 at 54.206.59.252

On Sun, Mar 15, 2015 at 5:56 PM, Sonny Rajagopalan <sonny.rajagopalan at gmail.com> wrote: > George, > > I have the detailed log below. (Resending after trimming the email to 40KB.) > > The sequence below just repeats ad-nauseam. Is this a SIP trunk issue? > > Thanks! > I don't see anything obvious. The registration works though, right? You might want to compare

I place a call into Asterisk (from SIP phone) and the To header does not have a tag. Asterisk then sends it's Trying response, still no tag in the To header. The phone then replies with OK, this time the To header includes a tag. Is there any way to retrieve this response To header (including the tag field) from the dial plan? I have tried the PJSIP-HEADER read of the To header, but it

I'm trying to set up pjsip to work with an obi202 and google voice. But I can't configure the endpoint. pjsip: [obi202-auth](!) type = auth auth_type = userpass password = <mypass> [obi202-aor](!) type = aor max_contacts = 2 ; ===== endpoints ======== [gv-voice](obi202-endpoint) auth = gv-voice aors = gv-voice identify_by=auth_username ;identify_by=username ; I also tried

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

On 06/14/2017 at 05:53 PM Joshua Colp wrote: > On Wed, Jun 14, 2017, at 12:47 PM, Michael Maier wrote: > > <snip> > >> >> I added this patch to see, if really all packages are are freed after >> they have been processed: >> >> --- b/res/res_pjsip/pjsip_distributor.c 2017-05-30 19:44:16.000000000 >> +0200 >> +++

Hello All, I've spent a day trying to get a Polycom IP500 wokring with my Asterisk box. I have several others that are working fine, but this one is getting by me. Can someone on-list tell from the following SIP debug what I've missed? Sip read: INVITE sip:2000@192.168.1.30:5060;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.1.37:5060;branch=z9hG4bK51f01c8152912F0E From: "2004"

Yes, I think the dial does get executed (sonny calling outbound 202-555-1212): core set verbose 3 Console verbose was OFF and is now 3. -- Executing [912025551212 at from-internal:1] Log("PJSIP/sonny-00000031", "NOTICE, Dialing out from "" <sonny> to 12025551212 through fromgw") in new stack [Mar 15 19:27:06] NOTICE[16648][C-00000022]: Ext. 912025551212:1 @

Hi guys, have really annoying problem with trunks when I calling over voip provider.. after awhile provider sends INFO packages but for some reason Asterisk doesn?t answer on it. after 8 packagers provider just drops the call, here is the package <--- Received SIP request (555 bytes) from UDP:192.168.53.1:5060 ---> INFO sip:c2e74184-4d23-43a3-8fd9-26ba2c5ef6c9 at 192.168.53.9:5060 SIP/2.0

Hey List I sometimes use our asterisk server to do some debugging or other PBX and SBC. Now we have a case where a PBX is replying an incomming invite with 180 ringing immediately. It looks like the SBC does not accept this. According to my understanding of the RFC 3261 any provisional (aka 1XX) reply should be good enough to make the sender stop re-sending invites and accept this as a reply

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]: