similar to: DAHDI compile problem

I was successful in compiling asterisk in raspbien except for the following error If I enable the gsm codec. It appears there is something in the Makefile n this directory that needs to be changed. Probably involving optimization. Not sure why it does not recognize the processor since it is one that is mentioned in the Makefile.? Any help would be appreciated. make[2]: Entering directory

Not sure how I should officially report this, but I'm getting a compile error with DAHDI-linux 2.7 when I define CONFIG_DAHDI_NET in include/dahdi/dahdi_config.h. I am able to compile successfully when I leave it undefined, but I need to be able to use the network support. <snipped> /oct6100_api/oct6100_tsst.o AR /tmp/dahdi-linux-2.7.0-net/drivers/dahdi/oct612x/lib.a

Hello, Getting this error on dahdi_cfg. Reverting to 2.8 the error goes away: *line 15: Unable to create 'dahdi_cfg' mutex.* Is this a problem? Thanks in advance. Full detail: [ebox]> dahdi_cfg -vvvvvvv DAHDI Tools Version - 2.9.0.1 DAHDI Version: 2.9.0 Echo Canceller(s): HWEC Configuration ====================== SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2:

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0 DAHDI-Tools-v2.9.0.1 dahdi-linux-complete-2.9.0+2.9.0.1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete This hotfix corrects a rare race

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0 DAHDI-Tools-v2.9.0.1 dahdi-linux-complete-2.9.0+2.9.0.1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete This hotfix corrects a rare race

Greetings- I'm wondering if the Digium PRI cards can be used for data (Cisco HDLC, PPP, etc) or if they're for voice circuits only. I haven't been able to find any information on this. All documentation direct from Digium seems to indicate their hardware is for voice applications only. Sangoma's cards work in either voice or data mode but of course this is configured in their

The Asterisk development team is pleased to announce the first offical release of the Digium Asterisk Hardware Device Interface (DAHDI). The list of packages released today includes: dahdi-linux 2.0.0 dahdi-tools 2.0.0 dahdi-linux-complete 2.0.0+2.0.0 Both dahdi-linux and dahdi-tools are required to enable DAHDI support in your system. You will need to install dahdi-linux first, then

Hello, I am running Asterisk 11.17 with DAHDI 2.9.0 and an OpenVox A800P with 8x analog POTS lines coming into my Asterisk server from the phone company. Internally, I have about 180 SIP clients defined in sip.conf. What appears to be happening is that if existing calls are consuming all 8 external lines and a new SIP client attempts to make a call, an existing call gets dropped. The asterisk

Hi, I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P card. Then I enter asterisk console, and once I do a "pri show channels", the console no longer works correctly. There's no output for any command after that. If I type "pri show" and hit tab for completion, console freezes there, I need to kill session. Any hints? new bug? known issue?

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0-rc1 DAHDI-Tools-v2.9.0-rc1 dahdi-linux-complete-2.9.0-rc1+2.9.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0-rc1 DAHDI-Tools-v2.9.0-rc1 dahdi-linux-complete-2.9.0-rc1+2.9.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0 DAHDI-Tools-v2.9.0 dahdi-linux-complete-2.9.0+2.9.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support for

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.0 DAHDI-Tools-v2.9.0 dahdi-linux-complete-2.9.0+2.9.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete - Introduces support for

I have two servers, each connected to the PTSN via PRI. When I call from site A (951-999-9999) to site B (555-1212) and the phone at site B is on the phone, I hear the normal ring tone for about 20 seconds, then the message "all circuits are busy now. please try your call again latter" followed by the congestion tone. Instead, I want this to busy ring and then hang up without any

Ok, Way too many requests. SO..... here's my Mini How-To. Use of this is at your own risk, Blah Blah Blah legal disclaimer applies..... ;-) Download from either: http://secure.netroedge.com/~lm78/ or http://www.integratedsolutions.org/downloads/i2c-2.8.7.tar.gz http://www.integratedsolutions.org/downloads/i2c-2.9.0.1.patch http://www.integratedsolutions.org/downloads/i2c-2.9.0.tar.gz

Dear Folks, I'm not able hearing the voice of client but on other hand client able to hearing my voice.I'm not able to find out the problem where is i'm wrong. I'm getting continues following error: chan_sip.c:10391 check_via: '' is not a valid host Configuration DAHDI Tools Version - 2.9.0.1 DAHDI Version: 2.9.0 Regards akihlesh -------------- next part

What is dahdi.auto_assign_spans and why should you care? In later versions the kernel module dahdi[Q] includes a new parameter: auto_assign_spans. It defaults to 1, and if you set it to 0, DAHDI can start behaving in strange and completely expected ways. Chances are the default will be set to 1 in a future version. Here is why you'll want to set it yourself. Up until DAHDI 2.5, hardware

Hello, I am trying to diagnose an intermittent error when a call comes in over our PRI lines. The problem appears random, however I have feeling it has something to do with the call volume, as the frequency increases with more calls on the system. I am not an expert when it comes to reading the PRI Span Debug statements but here is a call that had a problem and I bolded, italicized, and