similar to: G729 - what happens if licences used up?

Hello Everyone, We are looking to transition our 23 channels from testing/lab into production. During testing we used the free open source g729 license using the instructions found here: http://blog.manhag.org/2010/05/installing-the-free-g729-codec-for-asterisk/ A little more about our setup. All recordings have been converted to G729, all voicemail messages are also in G729, finally

Hi, does anybody made G723 or G729 to work with a GrandStream Phone ? I've a Cisco here and it works fine with G723, but not with my asterisk. The bandwitdh is very important, since we will have our extensions at home. I know that I have what I pay, but the phone works with cisco. Trying to use G723 or G729 Asterisk says no codec available. Does anybody have it working with any compression

Hi, despite some searching I haven't found an answer to this question: Is there a way I can see in the log, or find out in the dialplan, what codec has been negotiated for a SIP channel? If possible, I'd like to do this in both Asterisk 11 and in an old 1.2 system. What I'm specifically trying to do is to determine historically the usage of the G.729 licences installed in a system,

Could anyone who has successfully configured Asterisk to use g729 to conference 10-20 people please post their configs. I purchased and successfully installed 2 g729 licenses and but when I dial into my conference number on the Asterisk box from a SPA-2000 set to allow all codecs, it always appears to connect using ULAW. My iax.conf file includes the following under the general section

Thanks for the suggestion Tony, I installed each codec for MoH, core sounds, and extra sound packages. Unfortunately the tests produce the same results. [Sep 1 20:36:45] ERROR[10081][C-00007fe5]: frame.c:343 ast_frdup: FRACK!, Failed assertion Excessive refcount 100000 reached on ao2 object 0x20380b0 ( continuously for a while followed by a [Sep 1 20:36:46] WARNING[7761][C-0000770d]:

Hi users, I have Asterisk 1.6.2.20 in Ubuntu 10.04. I am trying to convert a gsm file to G729 using file convert, but I am facing error as follows, file convert /tmp/welcome.gsm /tmp/welcome.g729 Failed to convert /tmp/welcome.gsm to /tmp/welcome.g729! Command 'file convert /tmp/welcome.gsm /tmp/welcome.g729' failed. [Dec 20 17:24:18] WARNING[2221]: translate.c:256

Hi all: I've just purchase some licences of G.729 codecs, and I like to bring up * using /etc/rc.d/init.d script. Does anyone knows how to start in the "old" way? Thanks in advance, Gus -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031016/6dd07c4b/attachment.htm

In article <20151125133008.6369360.14455.17239 at gmail.com>, Israel Gottlieb <isrlgb at gmail.com> wrote: > Try putting progress instead of answer Yes, I tried Progress already, and it didn't help. But thanks for the suggestion! Tony > I have a puzzling situation, and would be grateful for any insight. > > I have a dialplan that forwards an incoming call out to

Has anyone else experienced a problem with the LED for span 1 on a TE410P or TE405P? I had a TE410P on which the span 1 LED would not light red, but once the span was connected, it did correctly light green. I RMAed the board to our UK distrbutor and received a replacement. However, the replacement board displayed the same problem! Wondering if it was related to the computer I was putting it

Hi, I am running asterisk 1.6.1.6 with a howler screamer card. I have g729 and alaw trunks from a pbx /sip providers. The howler screamer will only transcode from g729 to alaw / ulaw but my voice prompts are in SLIN and throws errors when i try and access these applications. Is it simply a case of converting the prompts into other codecs and asterisk will pick these up? ? Thanks

I've just set up a new box with FC1+updates and the latest Stable Asterisk from CVS. Asterisk is started with the default safe_asterisk script with a console on TTY9. The coloured text on this console is made up of weird characters instead of normal. Please see http://www.softins.co.uk/dsc00018.jpg for an example. If I do "asterisk -rvvvvv" on a normal login, either via the

In article <E02FA554-9D6D-4E7D-8A78-5FBDE1DE939D at kicp.uchicago.edu>, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > > > On Sep 26, 2020, at 8:05 AM, Jerry Geis <jerry.geis at gmail.com> wrote: > > > > I have a disk that is flagging errors, attempting to rescue the data. > > > > I tried dd first - if gets about 117G of 320G disk

In article <ml1jnh$afr$1 at softins.softins.co.uk>, Tony Mountifield <tony at softins.co.uk> wrote: > When I started using CentOS 6 instead of CentOS 5, I discovered that > "less" no longer understood \< and \>, which I had been used to using > since almost forever. > > Eventually research revealed that in the Fedora version on which > RHEL 6 was

On 06/09/2015 12:48 AM, Nicolas Thierry-Mieg wrote: > On 06/09/2015 12:33 AM, tony at softins.co.uk (Tony Mountifield) wrote: >> In article <ml1jnh$afr$1 at softins.softins.co.uk>, >> Tony Mountifield <tony at softins.co.uk> wrote: >>> When I started using CentOS 6 instead of CentOS 5, I discovered that >>> "less" no longer understood \<

I have been writing a lot of AGI programs in C with good success. I would like somehow to have an AGI program continue in the background while the pbx execution returns to the dialplan and continues. Is this possible? I was thinking that perhaps I could fork or create another thread within the AGI prog. The reason I want to do so is in order to monitor external information (e.g. credit limit and

Hi! The encoding, decoding and recoding cost cpu time, that's sure. But does this time differs much depending on the used codec? Is - for example - a G729 faster than a GSM codec? Bye! Michael

Does anyone know how a program, script or shell user can best determine whether the machine is running on bare metal or is a VMware guest? Cheers Tony -- Tony Mountifield Work: tony at softins.co.uk - http://www.softins.co.uk Play: tony at mountifield.org - http://tony.mountifield.org

I want to use fail2ban on CentOS 6 to monitor Apache with the standard default logfile format ("combined"). Has anyone here succeeded in doing so? The format has the IP at the start of the line, followed by two dashes (if no authentication) and THEN the timestamp. What I've read on the fail2ban wiki seems to say that the timestamp must ALWAYS be at the start of the line, followed by

Has anyone here done any work on clustering Meetme conferences over multiple Asterisk boxes? The scenario I am thinking of is where there are two or more boxes connected to a set of PRIs that all answer to the same PSTN number, and where it's not possible to know in advance on which box a call would arrive. So it would be possible to have some calls on one box and some on another, that should

Has anyone here used Asterisk inside a WatchGuard firewall, talking via the WatchGuard SIP Application Layer Gateway to an outside SIP service? I have a customer doing just that, and I am 100% convinced there is a bug in the ALG regarding the media port number it inserts into the SDP when it rewrites it. However, either they or WatchGuard will not accept there is a bug, despite my very detailed