similar to: g726 transcoding

Hello All, I was wondering if somebody could elaborate the change in translation of codecs specifically the amount of time increased in Asterisk 11. For example *Asterisk 11* * **alaw **speex * *gsm **15000 **15000 * *ulaw 9150 15000* * * *Asterisk 1.6.x* * **alaw **speex * *gsm **2 12002 * *ulaw 1 12002* I did recalculate the

I have no speex translation ulaw alaw gsm g726 g726aal2 adpcm slin8 slin12 slin16 slin24 slin32 slin44 slin48 slin96 slin192 lpc10 ilbc g722 testlaw ulaw - 9150 15000 15000 15000 15000 9000 17000 17000 17000 17000 17000 17000 17000 17000 15000 15000 17250 15000 alaw 9150 - 15000 15000 15000 15000 9000 17000 17000 17000 17000 17000 17000

I am not sure what you mean by the ful SIP signaling? Here is the trace for the sip.conf which works successfully. Below that, I will include the trace for the pjsip.conf which it seems Vitelity isn't accepting the ACK in response to the OK ---- SIP --- <--- Transmitting SIP request (1004 bytes) to UDP:64.2.142.93:5060 ---> INVITE sip:8005555555 at 64.2.142.93 SIP/2.0 Via: SIP/2.0/UDP

Hi all - I am using asterisk 13.27.0 with Linphone. I turned off all codes on linphone except the one I want to try. For example: opus and speex (so only one enabled at a time). Then did this same on asterisk for the linphone extension. disallow=all allow=speex (for example). Then I place my call and the call fails. if I enable something like gsm, ulaw, alaw the call works fine. Why does the

ive installed asterisk but below is what am getting proces gets killed.please help [root at localhost sounds]# asterisk -vvvvc Asterisk 13.13.1, Copyright (C) 1999 - 2014, Digium, Inc. and others. Created by Mark Spencer <markster at digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under

Dan Cropp wrote: > I had my screenshots flipped. Is there a way to make sure the Contact field is NOT included in the ACK response to the OK (for the Answer)? > > PJSIP is including the Contact for the ACK response to the OK. > Contact:<sip:1234 at xxx.xxx.xx.xxx:5060> > There is no configuration option to configure this behavior. What is the full SIP signaling? -- Joshua

hi, which file extensios are supported in mixmonitor application? https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+Application_MixMonitor can i record to Opus? -- --------------------------------------- Marek Cervenka =======================================

Hey i have an interesting topic to discuss here. The main goal here is to be able to make a video call between two WebRTC endpoints registered on asterisk 13 it is a feature that definitely asterisk 13 should support . the problems that i faced with this is the following and i hope i could get an advise here. asterisk 13 vanilla version has some issues marking the video packets this complain

Hi Gang, Hopefully somebody out there has a "doh" for this one. My dialplan announces the date and time using SayUnixTime. When I run this: exten => 36225,1,Set(ABA=999999999) exten => 36225,n,Background(telbank/${ABA}/${CHANNEL(language)}/thetimeis) exten => 36225,n,sayunixtime(,,Abe 'digits/at' IMP) I get this CLI output -- Executing

Hi, I'm trying to setup snom 710 phone with asterisk 13 with PJSIP. inbound is working fine but i cannot dial out. i don't hear anything on the phone and asterisk CLI also does not show anything. my config is. please advice. [2001] type=endpoint context=out-local disallow=all allow=ulaw allow=alaw transport=system-udp auth=2001

Le 09/09/2016 ? 18:32, Madushan Geethanga a ?crit : > Hi, If you're not using RTP encryption did you uncheck the option in your RTP TAB from identity ? > > This is the log. ex dialling 0 from snom phone > > > <--- Received SIP request (1230 bytes) from UDP:123.231.72.210:33878 > <http://123.231.72.210:33878> ---> > INVITE sip:0 at 54.206.59.252

Sorry for a possible retransmit: the first was sent from an incorrect email address. I'm trying to use the Polycom SoundStation IP 7000 with Confbridge. But the transcoding from siren14 to slin32 is via slin. First, it seems odd that there's no transcoder directly to slin32 since anything else will lower fidelity. But, more importantly, there is transcoding from siren14 to slin16 and

Using 11.4.0, trying to use SILK on the cell phone to ulaw over gv, but no success: [Jun 10 16:18:22] WARNING[4090][C-0000000a]: channel.c:6164 ast_channel_make_compatible_helper: No path to translate from SIP/ng-00000000 to Motif/+12025551212 at voice.google.com-da3c [Jun 10 16:18:22] WARNING[4090][C-0000000a]: app_dial.c:3032 dial_exec_full: Had to drop call because I couldn't make

Hi list, I have a set of 300 or so WAV files I was combining and playing using playback/background in 1.4.X. Now that I have moved on to the 10.0 set, I understand that I can replace my 8 Khz mono files with virtually unlimited Khz mono files (still no stereo, but a quantum leap forward). I've played with this and get good throughputs using SLIN44 formats on SIP. The 2 questions

Again - when Originate is run from dialplan, i get: NativeFormats: (slin192) WriteFormat: slin ReadFormat: slin192 WriteTranscode: Yes (slin at 8000)->(slin at 192000) ReadTranscode: No When it's made with a call file (no matter how a call file is created), I see NativeFormats: (slin) WriteFormat: slin ReadFormat: slin WriteTranscode: No ReadTranscode: No Please

Hi all! Asterisk 13.1.0 Ubuntu 16.04, all latest. Can anybody explain this to me - I run Originate command from dialplan: same => n,Originate(Local/${number}@mycontext,app,ConfBridge,${confnum}) and I get crazy sound distortion in the conference, and I see that transcoding takes place here: NativeFormats: (slin192) WriteFormat: slin ReadFormat: slin192 WriteTranscode: Yes (slin

hello I can't use cdex here is my error log could vorbis be the colpret? Event Type: Error Event Source: Application Error Event Category: None Event ID: 1000 Date: 7/9/2003 Time: 3:53:16 PM User: N/A Computer: HOME-XS1NC5AM3V Description: Faulting application cdex.exe, version 1.0.0.1, faulting module speex32.acm, version 1.0.0.0, fault address 0x0000b1fa. For more information, see Help

Hi, I am facing a (for me) strange problem. When placing a SIP-Call I normally get connected and the dialplan is executed. The Call-Flow is controlled by a PHP-Agi-Script. The script answers the call (via AGI-Command) and a simple voicefile is played. SOMETIMES(!) I get disconnected immediately after the Answer - without any reason. This happens about all fifth call. Later on you will find

Hi I am facing a strange problem. I have integrated speex codec's narrowband mode in my SIP based server. Then I tried to integrate the wideband mode. But the program crashes mysteriously. My encode and decode codes for wide band mode are exact similiar to that of narrowband, except the mode initialization, where I put "speex_wb_mode" instead of "speex_nb_mode". My

The Asterisk Development Team would like to announce the release of Asterisk 13.29.0. This release is available for immediate download at https://downloads.asterisk.org/pub/telephony/asterisk The release of Asterisk 13.29.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: