similar to: callfiles.call

Hi all, I've got a program that creates a callfile and most if it working great. However, when a call fails, I'm trying to capture the reason, which I'm told should be in the ${REASON} channel variable. http://www.voip-info.org/wiki/view/Asterisk+auto-dial+out Here is an excerpt from the callfile: Channel: local/155555555 Callerid:Tests <155555555> MaxRetries: 0 RetryTime:

Hi! I am trying to do a callfiel for autodialing but when I move the callfile to outdialing folder asterisk seems like if did the call but it doesnt. I put here my callfile and that I get when asterisk begins to do the call If anybody has idea, pls. Tell me TIA ;;----CallFile----- Channel: Zap/g1/8093908270 Callerid: 8093908270 MaxRetries: 2 RetryTime: 300 WaitTime: 45

Good afternoon list. I am experiencing a problem with the CDR and callfiles. What is happening is this: When generating a call with a callfile, everything works perfectly, but the CDR is recorded in the table when they answer the call destination. The field disposition is being recorded correctly, but the duration field is marked with the ring time and billsec is marked with 0. This just happens

Hi list, To make outgoing calls by skype i would like to have our crm app create callfiles like we do for normal calls. If i read the instructions it says this : ---quote--- The syntax for making an outgoing call using Skype for Asterisk is as follows: Dial(Skype/[<originator>@]<destination>) ---unquote--- So i create a callfile that looks like this: --- Channel: SIP/228

Hi there, I?ve been looking to do an outbound dialer for systems alerting, etc. and have in large part followed the recipe here: http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out That and the associated pages at voip-info give a basic set of recipes for callfiles, but nowhere there or in my copy of the O?Reilly book by Meggelen, Madsen, & Smith can I find a detailed

Using CVS from 7/12/04 and trying to get the voicemail broadcast feature to work. Voicemail.conf has [mycontext] 3722 => 1234,BroadCast Test,,,cc=*@mycontext . then many other voicemail boxes. ----- whenever I leave voicemail at box 3722, only box 3722 gets the voicemail. It is not expanding it to other voicemail boxes in the [mycontext] context. Even if I replace the cc= line with

Bear with me this is a bit long winded. I am having some issues making automated outbound calls over Broadvoice from my Asterisk 1.4.2 server. For reference, none of the below issues happen when I make the calls to VoIP phones attached to the Asterisk server. What I am trying to do is call, using a .call file, out via the SIP trunk we have setup, and when the party picks up use AMD to

I have an app that generates callfiles in the outgoing queue, which connect a channel to an AGI (Perl script) at an extension. The AGI calls the Dial command over a SIP channel. Sometimes I need to stop the outgoing calls after the requests have been made. I delete the callfiles from the outgoing directory, but there are still some calls "in the pipeline". Especially if Dials failed at

Hi all, In order to do loadbalancing between my two *, i wanted to stock all things concerning voicemail on a NFS partition... I see that the voicemail system put his files onto two differents directories : /var/spool/asterisk/voicemail/mycontext etc. and /var/lib/asterisk/voicemail/mycontext etc. I've two questions : Why ? and how can i do to centralize the destination of the messages AND

Hi folks Is it possible to turn off the native bridging on Asterisk? I've been hacking about app_disa.c to support account & pin numbers, that tag the calls depending on who logs in..... It all works fine, then dials the destination number they requested. My setup is as follows [ENDPOINT] <IAX1> [MYASTERISKBOX] < IAX1 > [TELCOBOX]<>(PSTN) If i dial

Hi, I am searching for the most effective solution for the following scenario: Our users can call into our IVR menu and dial a specific extension and immediately hang up. This event should simply trigger Asterisk to make multiple simultaneous calls through a group of zap channels (5-10 calls). When the called parties answer, Asterisk should simply play a message and hangup. So I was thinking

I am using Realtime extensions as well, in case that would matter. Following problem arises from time to time, a call will successfully terminate: [May 14 14:31:41] VERBOSE[3274] pbx_realtime.c: -- Executing [t at project_init:1] Hangup("SIP/peer-2-00002f7e", "") [May 14 14:31:41] VERBOSE[3274] pbx.c: == Spawn extension (project_init, t, 1) exited non-zero on

Hi all! Asterisk 13.1.0 Ubuntu 16.04, all latest. Can anybody explain this to me - I run Originate command from dialplan: same => n,Originate(Local/${number}@mycontext,app,ConfBridge,${confnum}) and I get crazy sound distortion in the conference, and I see that transcoding takes place here: NativeFormats: (slin192) WriteFormat: slin ReadFormat: slin192 WriteTranscode: Yes (slin

Hello, I'm using Asterisk 1.6.2.0 and I like to call extension #8 from callfile. Unfortunately the #-char ist interpreted just as comment. I got a "Invalid file contents in /var/spool/asterisk/outgoing/callfile, deleting" from asterisk. When I try to escape with \ oder use quotes, I got: \#8,1 failed so falling back to exten 's' or "#8",1 failed so falling back

I have Meetme conferencing compiled for Debian as per http://powerontech.com/freepbx-on-debian.htm . I drop a callfile in the outgoing dir, and it intitiates a call to a local extension as a channel, but the call seems to block on the Meetme() command. That extension completes the outgoing Dial(SIP) command to my phone, announcing that leg is the only member of the conference, and just waits. If I

My SIP-provider sends my a SIP-invite like this : INVITE sip:329298yyy6 at 80.XX.XX.69:5060 SIP/2.0 Via: SIP/2.0/UDP 80.XX.XX.68:5060;branch=z9hG4bKf395877e02e5aa21fd8f5a0c Max-Forwards: 70 From: <sip:321445xxx6 at 80.XX.XX.69>;tag=f395877e02bf8eb2fd8f5a0e To: <sip:329298yyy6 at 80.XX.XX.69> Call-ID: f395877e02187250fd8f5a0f at 80.XX.XX.68 CSeq: 1 INVITE User-Agent: SysMaster VoIP

Hi all, Is there any way of originating calls in future without using call files? We have 2 servers (1 active at a time). If we use call files with modification date in future, on the 1st server and it dies and, we activate the second server but we lose the call files. I could have a cronjob on both servers and create callfiles reading execution time from database, but this involves some other

Sorry to resurrect an old thread, but I finally got around to testing this approach (round tripping through bitcode in memory) and it works beautifully - and isn't that much slower than cloning. I have noticed however that the copy process isn't thread-safe. The problem is that in Function, there is lazy initialization code for arguments: void CheckLazyArguments() const { if

Im checking the wiki for call files info and seems somebody has a wake up script that runs call files at certain times. Do you know if its possible to run a call file by using some other methods different from cron jobs or at? The wiki mentions that it might be possible to do this is you modify the files creation date and time by using touch -f.. Is it true? The wakeup script creates call files

Currently using PJSIP. First, they want me to get this working with the existing PJSIP configuration, but then setup a second box using chan_sip performing similar work. For PJSIP... I currently have an endpoint configured to a system using IP based authentication. It is configured with a match setting in the endpoint section. All channels coming from that IP address go to this endpoint. They