similar to: patlooptest output - errors

Does anyone know if patlooptest either doesn't work for fxo/fxs signaled channels or if you have to do it a different way? If I run ./patlooptest /dev/zap/25 60 with a config like: fxsks=25-32 fxoks=33-48 it gives me a bunch of output along the lines of: (Error 4071): Unexpected result, 254 != 255, 11 bytes since last error. (Error 4072): Unexpected result, 0 != 255, 1 bytes since last

Hi List. I'm running the patlooptest program I've found in dahdi_tools 2.1.0.2. The target is a TE121P board with a loopback cable inserted on the socket. I suppose that the loopback is working fine because I'm able to see the green led on and dahdi_tool reports no errors. When I run the patlooptest I've a lot of errors (the received values are completely different than the

I've been working with Digium, but hopefully someone on-list has an idea... The card will transmit audio to the T1, but everything it receives is completely unintelligible static (in place of received audio only, not all the time). I've verified everything on Digium's troubleshooting checklist and they were unable to find anything when they logged in. zttest yields 100% for the

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd

Hi, I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P card. Then I enter asterisk console, and once I do a "pri show channels", the console no longer works correctly. There's no output for any command after that. If I type "pri show" and hit tab for completion, console freezes there, I need to kill session. Any hints? new bug? known issue?

In article <CAHZ_z=w5DMg93gShtC93kuC+fnmraPgV46BS956U5BQXVgyhxg at mail.gmail.com>, Matt Fredrickson <creslin at digium.com> wrote: > On Tue, Apr 3, 2018 at 5:44 AM, Tony Mountifield <tony at softins.co.uk> wrote: > > I have some more investigation to do on this, but I wanted to see if anyone > > here had any insight into the issue I've run into. > > >

Hey, Gang! To ensure that a file hasn't been corrupted or tampered with, you can use rpm to verify the package it came from. Well, I found this: rpm -Vv util-linux .... ........ /usr/bin/cal S.?..... /usr/bin/chfn ........ /usr/bin/chrt S.?..... /usr/bin/chsh .... Does anyone else get this? And what would be the proper course of action at this point? Thanks mucho. --

I have been trying to get lowest-latency sound (with highest fidelity) to use with Dragon NaturallySpeaking. I have Jaunty and the latest RT kernel, which I know has problems for many applications but works fine to run DNS. (It will not, however, install the program nor train it.) I set up real-time audio access as follows: sudo su -c 'echo @audio - rtprio 99 >>

Dear All; I am afraid from IRQ misses: 1 The ISDN E1 was working fine on the machine, the electrical disconnected and then the Red Allarm. I checked the dahdi and I found that I have to reinstall dahdi again and I did. But still not becoming UP. The output of the cat /proc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)? [root at CC

hello: I wan to use the test tools-patgen and pattest for pri cards. according to Tzafrir Cohen from http://docs.tzafrir.org.il/man/pattest.8.html, i still does not know how to use that. do i need to connect two pri cards with two servers, or use a cable to connect two cards in one server? please give me a more details in term of cables and configurations. thanks! Chris -------------- next part

Hi, I want to use tinc for voip phones. How can i measure the overhead ? Compared to a direct connection ? How can i reduce overhead when tunneling voip over tinc ? Greeting from Amsterdam, Perry Couprie

I have some more investigation to do on this, but I wanted to see if anyone here had any insight into the issue I've run into. The hardware is a HP DL360 G6 with a TE420 gen 5 4-port T1 PRI card. It is one of several systems that have been running without issue since 2010/2011. They have all been running CentOS 4 32-bit with Zaptel 1.4.12.1 (with patch for gen 5 card), libpri 1.2.8 and

Hey there, What recommendations does anybody have as to motherboards known to work well with the Digium TE110P T1 interface cards and the TDM400P analog POTS interface cards? We currently make use of the TE110P for our T1 (esf w/ b8zs - not a PRI) and have experienced many issues caused by our PBX's motherboard. Additionally, we built a server to become our new PBX, but that machine runs

I'll keep asking weird questions here: I have two T1 WAN circuits originating at my asterisk box and terminating at Asterisk servers at remote sites. Currently I use zaptel ppp assigned to all 24 channels for data. Now I would like to split off a few of these channels for voice trunks (I should use VOIP, but at the moment I do not have fast enough servers for the codecs) At one site

This one is for the archives. I got a call today that the * at one of my clients was not working. The switchboard is set up to ring for a while and then the rest of the phones start up if the switchboard doesn't pick up. This was not happening. Instead the mobile phone of one of the people there was ringing and after the delay the internals started ringing. When I connected to the web

Out of the blue i started receiving the following error on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release

I am running Asterisk 1.16.2.13, dahdi 2.4.0 and libpri 1.4.11.4 on an HP ML110 G6 using Ubuntu Linux 10.04 LTS. I have two Digium TE121 single T1 port cards and a Digium AEX800 8-port FXS card. All PCI Express cards. Co-workers are hearing hissing sounds on some calls, and I am getting IRQ errors when running "dahdi show status". I see that sharing IRQs for Digium cards isn't

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0 DAHDI-Tools-v2.11.0 dahdi-linux-complete-2.11.0+2.11.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release adds automake