similar to: Format big drives (4TB) in the installer?

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

Hi All; I have a new server we're setting up that supports EFI or Legacy in the bios I am a solid database guy but my SA skills are limited to what I need to get by 1) I used EFI because I wanted to create a raid 10 array with 6 4TB drives and apparently I cannot setup gpt partitions via parted in legacy mode (at least that's what I've read - is this true?) 2) I installed the OS

Hi all If we loose a drive in a raid 10 array (mdadm software raid) what are the steps needed to correctly do the following: - identify which physical drive it is - replace the drive - add the new drive to the array and force it to re-sync Thanks in advance

Hi All; I've downloaded the Cisco AnyConnect tar.gz file for one of our clients, when I untar it and then run the vpn_install script in the vpnclient directory I get the below error. Thanks in advance for any help... / //# ./vpn_install// //Cisco Systems VPN Client Version 4.8.02 (0030) Linux Installer// //Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved.// // //By

Hi, I?m doing a project for a company (my first big project in rails). The company alredy has a database schema, with lots of data, so I don?t want to change the database schema, but I don?t know how to map some associations. Example: Table: application Primary Key: idapplication Table: module Primary Key: idmodule Foreign Key: idapplication References aplicattion: idapplication Table:

Hi, I?m doing a project for a company (my first big project in rails). The company alredy has a database schema, with lots of data, so I don?t want to change the database schema, but I don?t know how to map some associations. Example: Table: application Primary Key: idapplication Table: module Primary Key: idmodule Foreign Key: idapplication References aplicattion: idapplication Table:

Hi All, Anyone know if the Intel Graphics Media Accelerator 4500MHD will support dual monitors with CentOS ? Thanks in advance /Kevin Sent from my iPad

Hi all; does anyone know if the following packages are available (via yum) for CentOS 6 and if so which repo they come from? Thanks in advance... kmymoney darktable digiKam -- --------------------------------------------- Kevin Kempter - Constent State A PostgreSQL Professional Services Company www.consistentstate.com ---------------------------------------------

Hi All; anyone have any info on setting up a L2TP over IPSEC client vpn connection? Thanks in advance

Hi, I've a question about the max. ext3 FS size. The ext3 FAQ explains that the limit is 4TB. http://batleth.sapienti-sat.org/projects/FAQs/ext3-faq.html | Ext3 can support files up to 1TB. With a 2.4 kernel the filesystem size is | limited by the maximal block device size, which is 2TB. In 2.6 the maximum | (32-bit CPU) limit is of block devices is 16TB, but ext3 supports only up | to 4TB.

Hello All, I do a 4TB filesystem for samba,but in Windows it only display 140GB,How to fix it?

Hi, Porting msan to the Cavium T99 chip requires a VMA mapping of 4TB. The brute-force way of doing this would be by collecting memory segments that weren't mapped - from the results of the msan test harness - and creating mapped segments ranges. Lather, rinse, repeat until all the addressable segments are mapped in msan.h. But I was wondering if there isn't a more efficient way of

On Thu, Aug 18, 2016 at 11:57 AM, James A. Peltier <jpeltier at sfu.ca> wrote: > Hi All, > > I have a Dell R710 that has 6x1TB in a RAID-5 configuration. This is hardware RAID 5? Because it's pretty screwy how this ends up working when using software RAID and might take additional troubleshooting. > When installing CentOS 7 using the full disk capacity and booting in

On Mon, Aug 22, 2016 at 1:24 PM, James A. Peltier <jpeltier at sfu.ca> wrote: > > > When running grub2-install from within recovery mode I can assure you it is not a user error because simply installing the grub2-efi-modules package allows for grub2-install to work. No, this logic is flawed. Running grub2-install is obsolete on UEFI, it only applies for users who know exactly what

On Fri, Aug 19, 2016 at 4:59 PM, James A. Peltier <jpeltier at sfu.ca> wrote: > > > ----- Original Message ----- > | On Thu, Aug 18, 2016 at 11:57 AM, James A. Peltier <jpeltier at sfu.ca> wrote: > | > Hi All, > | > > | > I have a Dell R710 that has 6x1TB in a RAID-5 configuration. > | > | > | This is hardware RAID 5? Because it's pretty

I need to rsync 4 TB datafiles to remote server and clone to a new oracle database..I have about 40 drives that contains this 4 TB data. I would like to do rsync from a directory level by using --files-from=FILE option. But the problem is what will happen if the network connection fails the whole rsync will fail right. rsync -a srchost:/ / --files-from=dbf-list and dbf-list would contain this:

Hi all, Thank you for your very useful product but I have a memory problem. I want use you product to migrate 4TB of data (in 150?millions files) When rsync make the list of files it full my RAM and after my SWAP and my server crash. I have 4GB of RAM and 4GB of SWAP Do you know what can I do?? Can I have an option to use an index on disk or something like this?? Thanks in advance

Hi, I've a question about the max. ext3 FS size. The ext3 FAQ explains that the limit is 4TB. http://batleth.sapienti-sat.org/projects/FAQs/ext3-faq.html | Ext3 can support files up to 1TB. With a 2.4 kernel the filesystem size is | limited by the maximal block device size, which is 2TB. In 2.6 the maximum | (32-bit CPU) limit is of block devices is 16TB, but ext3 supports only up | to 4TB.

We have a server with about 6x750Gb SATA drives setup on a hardware RAID controller. We created hardware RAID 5 on these 6x750GB HDDs. The effective size after RAID 5 implementation is 3.4TB. This server we want to use it as a data backup server. Here is the problem we are stuck with, when we use fdisk -l, we can see the drive specs and its size as 3.4TB. But when we want to create two different

Hi All, I have a Dell R710 that has 6x1TB in a RAID-5 configuration. When installing CentOS 7 using the full disk capacity and booting in UEFI mode the machine dumps me into a GRUB rescue mode prompt. error: disk `,gpt2' not found Entering rescue mode... grub rescue> If I use the PERC RAID controller to make the disk smaller ROOTDISK volume of 100GB in size and then a DATA volume