similar to: failed drive on an HP dl580 G5

If this were a Dell RAID, I could use megaraid while the system's running. Does anyone know what I need to use to manage the HP "amart array" RAID? I've got an orange light on a drive, and can't find, googling, whether I can just pull the drive, or if I have to separate it from the RAID, or.... And can't bring the system down to use the firmware interface, not without

Jason Warr wrote: > On July 10, 2015 11:47:09 AM CDT, m.roth at 5-cent.us wrote: >> Hi. Anyone working with these things? I've got a drive in "predictive >> failure" on in a RAID5. Now here's the thing: there was an issue >> yesterday when I got in, and I wound up power cycling the RAID; >> first boot of attached server had issues, and said the

Hi. Anyone working with these things? I've got a drive in "predictive failure" on in a RAID5. Now here's the thing: there was an issue yesterday when I got in, and I wound up power cycling the RAID; first boot of attached server had issues, and said the controller had a failure, and a drive had failed, and wouldn't continue booting; when I gave it the three-finger salute,

On a CentOS 6 64bit system, I added a couple prototype SAS SSDs on a HP P411 raid controller (I believe this is a rebranded LSI megaraid with HP firmware) and am trying to format them for best random IO performance with something like postgresql. so, I used the raid command tool to build a raid0 with 2 SAS SSDs # hpacucli ctrl slot=1 logicaldrive 3 show detail Smart Array P410 in Slot 1

Running CentOS 6.7, on an older HP DL580 G5. We've got a Dell 12-bay RAID box plugged into a PERC H800 (aka LSI Liberator) that we put in the HP, and that works fine. We've got a new RAID (a JetStor), and are trying to plug it in. The layout is that the Dell RAID is dual-pathed DAS. Each PERC has two DAS ports. We've got the Dell RAID in the top port of each PERC. I *thought* I could

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

On 10/07/15 10:06, John R Pierce wrote: > On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >> Got an old HP box with a P800 Smart Array controller. The HP RAID >> box >> plugged into it's failing, and we got a new JetStor. Anyone know if we >> can just plug the JetStor in and set it to passthrough, or if we have >> to use the P800's firmware to set up

I had to install C5 on a dev server for various reasons (legacy system support and so forth). This dev server is a HP DL180 G6, with a SmartArray P410 raid card... I've installed hpacucli via the RPM from HP's site, but its not finding the controller... C5 (64 bit) is using the default CCISS drivers for this card. # hpacucli ctrl all show config Error: No controllers detected.

On 10/07/15 11:13, m.roth at 5-cent.us wrote: > Jack Bailey wrote: > >>> controller that expects to talk to individual SAS or SATA drives. you >>> can manage it with hpssacli from centos. >> I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS >> 7.0, but is broken on 7.1 -- it cannot find the controller. > Can it do RAID 6? > This page

Hello all I'm gathering the output of the hpacucli program from as much configurations as possible. If you can find some free time for me, can you send me the output of: hpacucli ctrl all show detail hpacucli ctrl slot=1 show config hpacucli ctrl slot=1 array all show hpacucli ctrl slot=1 array A show hpacucli ctrl slot=1 physicaldrive all show hpacucli ctrl slot=1 physicaldrive 2I:1:1

Greetings: HP has drivers for the this controler but how do you get the drivers working for the install on Centos 4.0 ? Integrated Dual Channel Ultra ATA 100 IDE Adapter (ATA Models) I extracted the files from this RPM and placed on a CD. hpacucli-7.21-17.linux.rpm boot with the driver disk option and it does not find drivers. I'm I on the right track? Thanks -Jay

When last we saw our hero, er, sysadmin, he'd found that the "noarch" BIOS update was, in fact, a self-extracting .exe file, and he'd extracted it. Finally getting the ok to take the system down, the following hilarity (for small values of hilarity) ensued. First, booting off unetbootin to freedos was fine... except it was try to guess which version - freedos + emm386 + himem,

Valeri Galtsev wrote: > > On Fri, March 25, 2016 9:55 am, m.roth at 5-cent.us wrote: >> I don't think I've seen this with CentOS 6 or 5, but I had to repair an >> external RAID box this morning. The server, running CentOS 7, has an >> LSI HBA card in it, and it's presented to the system as /dev/sdb. >> I shut off the RAID controller, powered it off, >

I was wondering if anyone here has experience with HP MSA60 with P400 and P800 controller. How reliable are they for a 24x7 shop? TIA

Does anyone know of a card that actually works with CentOS 4 that supports Raid10? I don't think CentOS support software raid 10 from the installer. Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20050812/ab215629/attachment-0002.html>

This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for reuse... and the box refuses to see the drive. *Nothing* in

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",