similar to: Monitor Wireless Networks

On Thu, Feb 20, 2014 at 9:39 AM, Joseph Hesse <joehesse at gmail.com> wrote: > Hi, > I am having interference with my neighbouring wireless networks. > Is there a linux tool that enables me to monitor the ESSID, channel, > power output and other information for neighbouring wireless networks? > I am especially interested in the channel so I can choose a different one. >

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

Hello, I am using wireless N on a DLink-655 wireless router. It is the "A" hardware version with the latest firmware. I am using a channel that no one in my vicinity is using, according to iwlist. I checked the Statistics from the router web interface and they are shown below for a period of less than an hour. It looks like the errors are excessive, especially the "RX Packets

On 11/04/2015 09:10 AM, Bowie Bailey wrote: > If all of the routers are providing access to the same network, you > can set up the same SSID, wifi password, and security type for all the > routers and the clients should seamlessly switch between them as they > move around. As a point of clarification: The setup that you're describing isn't multiple WiFi routers, it's

Hi, i''m trying to use PCI passthrough feature on Xen 4.0 but it fails on my Wireless card. I use Xen 4.0 on a Debian 6.0 (package from repo) and try to passthrough the following PCI device root@omega:~# dpkg -l | grep xen ii libxenstore3.0 4.0.1-1 Xenstore communications library for Xen ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 Linux 2.6.32 for 64-bit PCs, Xen dom0 support ii

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

Hello, I am trying to use SNMP on a CentOS 6.2 server, and am using the 'pass_persist' configuration command: pass_persist .1.3.6.1.4.1.141.1 /usr/local/sbin/snmp-iostat I have set the file context of 'snmpd_exec_t' on the snmp-iostat program. If I disable SELinux, then it all works fine (that is, I can then snmpget/snmpwalk for OIDs in the configured pass_persist OID,

Hello, I installed the ClamAV package onto a CentOS 6.3 server using yum. I then modified the /etc/freshclam.conf file to run a perl script whenever the ClamAV databases were updated: OnUpdateExecute /usr/local/bin/xymon_event ... The 'xymon_event' command is used on several servers, and generally works with no problems. However, on this server when the /etc/cron.daily/freshclam script

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

[desktop] ----- lan ----eth0 [notebook] eth1 192.168.?.? ` ----- wlan ---- [speedport(hub and router)] -- internet 192.168.2.x So on my laptop I have eth0 beeing lan, eth1 beeing wlan ethernet card. When only using eth0/1 everything is fine. Now I want to be able to use internet from both [desktop] and [notebook]. Typically you set up a bridge with

Is there a step by step approach to securing CentOS 4X (or even RHEL 4X)? I don't mean the stuff in the docs/security guide but a working step by step guide? There used to be packages like rkhunter and tripwire but I don't know if the ones in rpmforge/kbs repo are up to date. Thanks, Josh.

Dear all, I am running squid on centos 5.Is there is any tool to calculate number of ip's hit the server for month wise. Even any command to find out the number of hits is also ok. Regards, Lingu

Please note, I reinstalled, because a virus named windows 8 spontaneously "repaired" the drive eliminating the dual-boot. This time I configured wireless in the initial stage of installation from DVD, it did connect. But after install, after reboot, it appears not to be available. Have not yet installed any extra packages. $ rfkill list 0: phy0: Wireless LAN Soft blocked: no

Dear List, I have a data frame with approximately 500000 rows that looks like this: ?Date??? time??? value ? 19.07.1956????????? 12:00:00?????????????? 4.84 19.07.1956????????? 13:00:00?????????????? 4.85 19.07.1956????????? 14:00:00?????????????? 4.89 19.07.1956????????? 15:00:00?????????????? 4.94 19.07.1956????????? 16:00:00?????????????? 4.99 19.07.1956????????? 17:00:00?????????????? 5.01

Hi all, I try to interpolate a data set in the form: time Erg 0.000000 48.650000 1.500000 56.080000 3.000000 38.330000 4.500000 49.650000 6.000000 61.390000 7.500000 51.250000 9.000000 50.450000 10.500000 55.110000 12.000000 61.120000 18.000000 61.260000 24.000000 62.670000 36.000000 63.670000 48.000000 74.880000 I want to get smoothed splines by using the class gam The first way I tried , was

I have been *manually* dealing with my wired and wireless network interfaces on my laptop. I have a pair of config files (in /etc/sysconfig/network-scripts/: ifcfg-eth0 (wired: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile)) and ifcfg-eth1 (wireless: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter), both with USERCTL=true (and ifcfg-eth0 also has ONBOOT=true). I have

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not sure if it should be there or its absence is a

All - desperate plea for help here. Overview Centos 4.5 Kernel 2.6.9.55.0.9.EL with source dell Latitude 810 Im totally at my wits end... Ive tried like mad to get ndiswrapper to work for my lynksys WPC54GS wireless card. No matter what I try ndis gives some kind of error on installing the module after about a dozen attempts 8 kernels, and 5 days- I finally GAVE UP! unreal So, I