similar to: FreeBSD Wifi/Run0

I have been playing around with 3 ath based FreeBSD boxes and seem to have got everything going via WPA and a common PSK for 802.11x auth. However, I want to have a bit more certainty about things working properly. What tools do people recommend for sniffing and checking a wireless network ? In terms of IDS, is there any way to see if people are trying to bruteforce the network ? I see

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

HI I admit up front that I know just enough about wireless networking to know that I don't know much at all about it. That said, I'm hoping someone can help me learn a little bit... Specifically, could a laptop running Centos 5.1 be expected to (be able to) connect to a wireless access point using WPA2 security settings? I don't know if WPA depends on hardware support, or if

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

Hi! I'm messing about with an old Toshiba Tecra laptop. i've got wireless working well using NetworkManager and WEP. But I'm interested in finding out if it is possible to get WPA/TKIP or other WPA variants to work with that driver. According to dmesg, boottime diagnostics include: eth0: Hardware identity 0005:0004:0005:0000 eth0: Station identity 001f:0001:0008:000a eth0: firmware

Hello, Maybe someone will run into the same problem, so here is how it works for me. I could not get work my wlan card (ralink rt61) with the driver from rt2x00.serialmonkey.com under CentOS 5 (2.6.18-8.1.1.el5). All drivers (beta and daily cvs) from this site freezes my system. So I get the driver from the Ralink support at http://www.ralinktech.com/ralink/Home/Support/Linux.html

first, the short form of the question -- has anyone got that wireless adapter working on centos 5.5 and associated with an access point that uses WPA/WPA2 security? and the details. in a classroom where there is *no* wired networking at all, all PCs have only that wireless net adapter, which works fine on windows but, after installing centos 5.5, unsurprisingly, we have no networking. there

After reading that someone had problems with 802.11i/WPA2, I tested my iwi device, too. 802.11i (as client) works, but disconnects about every five minutes briefly, which is nothing new -- I had the same issue with 6.2-RELEASE. In contrast to 6.2-RELEASE, monitor does not work. Kismet does not receive anything, while it does with ath or ural (even at the same time). dmesg with debug.iwi=2 is

I am using a Netgear MA401 with the wi driver, and am having trouble using wpa_supplicant to set static WEP keys. I have the wlan_wep.ko module loaded with wlan and wi built into the kernel. My wpa_supplicant.conf looks like this: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="INTERNERD" scan_ssid=1 priority=1 key_mgmt=NONE

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

Hello, Does anybody knows if the rt61 driver from rt2x00.serialmonkey.com works under centos 5? And if so, what is the recommended command to build this driver from sources, 'make install' or 'make install-fedora'? Thanks a lot! I need this driver for my ralink wlan card on my notebook. I also could build this driver under a fresh centos 5 installation, but it freezes my notebook

Hi all, Finally, I have installed openvswitch from source to two CentOS hosts: one 6.x and other 7.x. I will do some tests using openvswitch bridges to my KVM machines. One of these tests is to add a wlan0 adapter from comandline but only when this wlan0 is associated with a ssid without assign an IP. Is this posible? Do I nees to add some ebtables like, for example, Debian's wiki

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

Has anyone had any experience with wireless LANs and Asterisk? We have and here are my impressions. We configured an Asterisk in the office as a precaution to see how it would work for our own retail customers. Our office is open space, about 800 sq ft. (20x40 area). We use Snom200 and Grandstream SIP phones. Using the latest Linksys wireless access point (WAP54g) and 3 wireless bridges

Well I think we all need to look at something like this first. We will be one of the first people in Europe who will be selling this. If anyone is interested do drop me an email. Picture of the phone can be found here. http://cyber-telecom.net/wifi-gsm.jpg GSM / VoIP Over WiFi Dual-Mode Phone CYBER-TELECOM released the world first commercial GSM/VoIP Over WiFi dual-mode smart phone, in

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

I realize that many on this list have likely applauded the NetworkManager package split that removed wireless stuff into its own package, NetworkManager-wifi, because for wired workstations and servers it might be desirable to not have any wifi software installed. And I believe it was a sound technical decision to do the split. However, in doing a fresh installation of what most call CentOS

Hello Tom ! You write in your guide http://shorewall.net/IPSEC-2.6.html > Warning > > As of this writing, the Netfilter+ipsec and policy match > support are broken when used with a bridge device. The problem >has been reported to the responsible Netfilter developer who has confirmed the problem. I''ve set up a bridge between my wlan (hostap) and my local net. I