similar to: replace-brick failing - transport.address-family not specified

So I messed up when building a brick on a gluster 3.3.1 filesystem. Instead of i=512 on the xfs filesystem I set i=256. I realized my mistake after I had already rebalanced the volume. I wanted to remove and replace that brick in order to rebuild it properly as it hadn't failed yet but I knew that it wasn't good to have i=256. So I attempted to do: gluster volume replace-brick

Hi, I am testing geo-replication 3.5.2 by following the instruction from https://github.com/gluster/glusterfs/blob/master/doc/admin-guide/en-US/markdown/admin_distributed_geo_rep.md All commands are executed successfully without returning any error, but no replication is done from master to the slave. Enclosed please find the logs when starting the geo-replication volume. At the end of the log,

Hello list, I'm experimenting with a little GlusterFS cluster on debian wheezy: === snip === muzzy:~# cat /etc/debian_version wheezy/sid muzzy:~# dpkg -l | grep gluster ii glusterfs-client 3.2.6-1 clustered file-system (client package) ii glusterfs-common 3.2.6-1 GlusterFS common libraries and translator modules ii glusterfs-server 3.2.6-1 clustered file-system (server package) === snip

Greetings, Legend: storage-gfs-3-prd - the first gluster. storage-1-saas - new gluster where "the first gluster" had to be migrated. storage-gfs-4-prd - the second gluster (which had to be migrated later). I've started command replace-brick: 'gluster volume replace-brick sa_bookshelf storage-gfs-3-prd:/ydp/shared storage-1-saas:/ydp/shared start' During that Virtual

Hi, I had a 2 node distributed cluster running on 3.1.1 and I added 2 more nodes. I then ran a rebalance on the cluster. Now I am getting permission denied errors and I see the following in the client logs: [2011-02-24 09:59:10.210166] I [dht-common.c:369:dht_revalidate_cbk] loader-dht: subvolume loader-client-3 returned -1 (Invalid argument) [2011-02-24 09:59:11.851656] I

Could you please send me the output of command "sysctl net.ipv4.ip_local_reserved_ports". Apart from output of command please send the logs to look into the issue. Thanks Gaurav On Thu, Jun 15, 2017 at 4:28 PM, Atin Mukherjee <amukherj at redhat.com> wrote: > +Gaurav, he is the author of the patch, can you please comment here? > > > On Thu, Jun 15, 2017 at 3:28

Hi, I have tried on my host by setting corresponding ports, but I didn't see the issue on my machine locally. However with the logs you have sent it is prety much clear issue is related to ports only. I will trying to reproduce on some other machine. Will update you as s0on as possible. Thanks Gaurav On Sun, Jun 18, 2017 at 12:37 PM, Guy Cukierman <guyc at elminda.com> wrote: >

Hi, Line 762 of efi/main.c (git firmware branch) should be changed to if (hdr->version < 0x20b) { Without this change syslinux efi64 gives out "handover protocol unimplemented error" and fails to boot. With this change syslinux boots the kernels fine (tested with 3.6.9 and 3.7rc6 kernels). Please fix this. Thanks in advance. Regards. Keshav

Hi, Below please find the reserved ports and log, thanks. sysctl net.ipv4.ip_local_reserved_ports: net.ipv4.ip_local_reserved_ports = 30000-32767 glusterd.log: [2017-06-18 07:04:17.853162] I [MSGID: 106487] [glusterd-handler.c:1242:__glusterd_handle_cli_probe] 0-glusterd: Received CLI probe req 192.168.1.17 24007 [2017-06-18 07:04:17.853237] D [MSGID: 0] [common-utils.c:3361:gf_is_local_addr]

Here is a patch that makes it possible to chainload GRUB2 core.img form chain.c32. It reuses the grub= parameter (used for chainloading GRUB Legacy stage2): - both loaded at 0x8000 - start execution at offset 0x200 (0x8200 in memory) GRUB2 allows to specify another "GRUB home dir" than the standard /boot/grub GRUB2 doesn't allow to change the configfile 'grub.cfg' name

Hi, I am able to recreate the issue and here is my RCA. Maximum value i.e 32767 is being overflowed while doing manipulation on it and it was previously not taken care properly. Hence glusterd was crashing with SIGSEGV. Issue is being fixed with " https://bugzilla.redhat.com/show_bug.cgi?id=1454418" and being backported as well. Thanks Gaurav On Tue, Jun 20, 2017 at 6:43 AM, Gaurav

Thanks Gaurav! 1. Any time estimation on to when this fix would be released? 2. Any recommended workaround? Best, Guy. From: Gaurav Yadav [mailto:gyadav at redhat.com] Sent: Tuesday, June 20, 2017 9:46 AM To: Guy Cukierman <guyc at elminda.com> Cc: Atin Mukherjee <amukherj at redhat.com>; gluster-users at gluster.org Subject: Re: [Gluster-users] gluster peer probe failing

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

When I make, I obtain the following errors Using FLAGS = -O -D_SAMBA_BUILD_ -I./popt -Iinclude -I/usr/local/src/samba-3.0. 21c/source/include -I/usr/local/src/samba-3.0.21c/source/ubiqx -I/usr/local/src/ samba-3.0.21c/source/tdb -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GN U_SOURCE -I/usr/local/src/samba-3.0.21c/source -D_SAMBA_BUILD_ LIBS = -lcrypt -lresolv -lnsl -ldl

Hello, I'm seeing this warning and oops when trying to fuzz linus v4.4-rc1-290-g3ad5d7e with trinity. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4308 at drivers/gpu/drm/nouveau/nouveau_fence.c:198 nouveau_fence_context_new+0x22e/0x270() CPU: 1 PID: 4308 Comm: trinity-c19 Tainted: G B 4.4.0-rc1+ #1 Hardware name: Dell Inc. OptiPlex 990/0D6H9T, BIOS A06 07/25/2011

Hi, I have buit Xen (32 bit) with PAE and can start multiple Paraguests with 4 gig memory, but cannot launch a single VM with more than 4 gb memory. I would like to launch 1 VM with 30GB or so memory. Are there any config paramters like kernel,/inittrd that need to be changed. I have the ramdisk set to the initrd I used to boot xen with PAE. Thanks - padma

Hi, tried to install the advanced DSP program Spectrum Lab which I have been able to install in a previous version but the latest will not work. I'm using he latest verson of Wine in Kubuntu. Error messages as follows Grateful for any help Regards TobbeR tobbe@jme:~$ wine InstallSpecLab.EXE wine: Unhandled page fault on read access to 0xc20d27f9 at address 0x7e84bc8f (t hread 0009), starting

Hi, I just want to know if somebody use 2.6.31.4 xenified kernel (aka OpenSUSE) in production? We have been testing it on new Nehalem Xeon server for few weeks w/o any problem. But as soon we tried it on production machine - after several production domUs started - hard OS failure. We had to switch back to 2.6.18.8 - xen stock kernel. Peter _______________________________________________

Hi, I'm trying to figure out the cause of a soft lockup I experienced: Mar 29 09:38:24 pstn1 kernel: BUG: soft lockup - CPU#0 stuck for 10s! [asterisk:32029] Mar 29 09:38:24 pstn1 kernel: Pid: 32029, comm: asterisk Mar 29 09:38:24 pstn1 kernel: EIP: 0060:[<c046e7fe>] CPU: 0 Mar 29 09:38:24 pstn1 kernel: EIP is at kfree+0x68/0x6c Mar 29 09:38:24 pstn1 kernel: EFLAGS:

On Mon, Jan 22, 2018 at 10:38 PM, Nathan March <nathan at gt.net> wrote: > Just a heads up that I'm seeing major stability problems on these builds. > Didn't have console capture setup unfortunately, but have seen my test > hypervisor hard lock twice over the weekend. > > This is with xpti being used, rather than the shim. Thanks for the heads-up. It's been