similar to: Testing failover and recovery

Hi list. I am dealing with DRBD (+GFS as its DLM). GFS configuration needs a CLVMD configuration. So, after syncronized my (two) /dev/drbd0 block devices, I start the clvmd service and try to create a clustered logical volume. I get this: On "alice": [root at alice ~]# pvcreate /dev/drbd0 Physical volume "/dev/drbd0" successfully created [root at alice ~]# vgcreate

Dear list, I have a data frame like: > log2.ratios[1:3,1:4] Clone a1 a2 a3 1 GS1-232B23 -0.0207500 0.17553833 0.21939333 2 RP11-82D16 -0.1896667 0.02645167 -0.03112333 3 RP11-62M23 -0.1761700 0.08214500 -0.04877000 how to make it to look like: > log2.ratios[1:3,1:4] a1 a2

Hi Krutika, I also did one more test. I re-created another volume (single volume. Old one destroyed-deleted) then do 2 dd tests. One for 1GB other for 2GB. Both are 32MB shard and eager-lock off. Samples: sr:~# gluster volume profile testvol start Starting volume profile on testvol has been successful sr:~# dd if=/dev/zero of=/testvol/dtestfil0xb bs=1G count=1 1+0 records in 1+0

> Dear list, > I have a data frame like: > > > log2.ratios[1:3,1:4] > ID a1 a2 a3 > 1 GS1-232B23 -0.0207500 0.17553833 0.21939333 > 2 RP11-82D16 -0.1896667 0.02645167 -0.03112333 > 3 RP11-62M23 -0.1761700 0.08214500 -0.04877000 > 4 RP11-62M23 0.2761700 -0.15214500 -0.05877000 > the 3rd and

Hi Krutika, May I kindly ping to you and ask that If you have any idea yet or figured out whats the issue may? I am awaiting your reply with four eyes :) Apologies for the ping :) -Gencer. From: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] On Behalf Of gencer at gencgiyen.com Sent: Thursday, July 6, 2017 11:06 AM To: 'Krutika

Hi, Sorry for the late response. No, so eager-lock experiment was more to see if the implementation had any new bugs. It doesn't look like it does. I think having it on would be the right thing to do. It will reduce the number of fops having to go over the network. Coming to the performance drop, I compared the volume profile output for stripe and 32MB shard again. The only thing that is

http://bugzilla.mindrot.org/show_bug.cgi?id=1041 Summary: Allow the admin to specify PAM service name Product: Portable OpenSSH Version: -current Platform: All OS/Version: Linux Status: NEW Severity: enhancement Priority: P2 Component: PAM support AssignedTo: bitbucket at mindrot.org

Hi All, I am a newbie to asterisk, and here is my first problem, where I do not know any further. I have to grandstream BT100 connected to asterisk. Working fine, for calling to each other, and to call via a IAX-Link to the outside. If I try to call the initial demo from the samples.extensions.conf I have nothing to hear. The CLI fine reports: -- Executing

Hi, I understand from earlier discussions that the reason dovecot doesn't support proxying of other SASL mechanisms than those which supply the plaintext password is that in general it would be possible to proxy any SASL mechanism since it might protect against man-in-the-middle attacks (which would prevent proxying). However, that has led to choice between letting users use PLAIN (or

Great news. Is this planned to be published in next release? Il 29 mag 2017 3:27 PM, "Krutika Dhananjay" <kdhananj at redhat.com> ha scritto: > Thanks for that update. Very happy to hear it ran fine without any issues. > :) > > Yeah so you can ignore those 'No such file or directory' errors. They > represent a transient state where DHT in the client process

Hi Mahdi, Did you get a chance to verify this fix again? If this fix works for you, is it OK if we move this bug to CLOSED state and revert the rebalance-cli warning patch? -Krutika On Mon, May 29, 2017 at 6:51 PM, Mahdi Adnan <mahdi.adnan at outlook.com> wrote: > Hello, > > > Yes, i forgot to upgrade the client as well. > > I did the upgrade and created a new volume,

Hi I have defined my SIP phones like this ... [Sip1] username=gs1 callerid= "Full name" <1001> etc etc Now, when I do this in a given extension exten => nnnn,1,NoOp(${CALLERIDNUM}) then I get "<gs1>" as callerid and not "<1001>" as defined with callerid= Sure, I could set the usernames to their respective extensions, but I don't want

The fixes are already available in 3.10.2, 3.8.12 and 3.11.0 -Krutika On Sun, Jun 4, 2017 at 5:30 PM, Gandalf Corvotempesta < gandalf.corvotempesta at gmail.com> wrote: > Great news. > Is this planned to be published in next release? > > Il 29 mag 2017 3:27 PM, "Krutika Dhananjay" <kdhananj at redhat.com> ha > scritto: > >> Thanks for that update.

Great, thanks! Il 5 giu 2017 6:49 AM, "Krutika Dhananjay" <kdhananj at redhat.com> ha scritto: > The fixes are already available in 3.10.2, 3.8.12 and 3.11.0 > > -Krutika > > On Sun, Jun 4, 2017 at 5:30 PM, Gandalf Corvotempesta < > gandalf.corvotempesta at gmail.com> wrote: > >> Great news. >> Is this planned to be published in next

For whom asked me support for capi devices, that's here: http://www.junghanns.net/asterisk/ I'm using a AVM B1 card. also AVM passive card (FRITZ!PCI) works.... Then is you use SuSe all is configured by yast... Hello, probably is a feature what I'm asking for but because of my inexperience to asterisk this is my question: I've configured CAPI ISDN to receive calls. When I

On 12/06/19 1:38 PM, Alan Orth wrote: > Dear Ravi, > > Thanks for the confirmation?I replaced a brick in a volume last night > and by the morning I see that Gluster has replicated data there, > though I don't have any indication of its progress. The `gluster v > heal volume info` and `gluster v heal volume info split-brain` are all > looking good so I guess that's

I'm using the TSA package (along with all prerequisites) to do some GARCH work and for some reason, something which used to work for me has decided to up and stop. The code is as follows, after loading the package: " gs <- garch.sim(alpha=c(1.9,0.1), beta=c(0.700001, -0.0800003, -0.016),rnd = rnorm, n = 400, ntrans=500) gs1 <- garch.sim(alpha=c(1.9,0.1), beta=c(0.7, -0.08,

Krutika, I?m sorry I forgot to add logs. I attached them now. Thanks, Gencer. From: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] On Behalf Of gencer at gencgiyen.com Sent: Thursday, July 6, 2017 10:27 AM To: 'Krutika Dhananjay' <kdhananj at redhat.com> Cc: 'gluster-user' <gluster-users at gluster.org> Subject: Re:

Ki Krutika, After that setting: $ dd if=/dev/zero of=/mnt/ddfile bs=1G count=1 1+0 records in 1+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 11.7351 s, 91.5 MB/s $ dd if=/dev/zero of=/mnt/ddfile2 bs=2G count=1 0+1 records in 0+1 records out 2147479552 bytes (2.1 GB, 2.0 GiB) copied, 23.7351 s, 90.5 MB/s $ dd if=/dev/zero of=/mnt/ddfile3 bs=1G count=1 1+0 records

I am messing around with gluster management and I've added a couple bricks and did a rebalance, first fix-layout and then migrate data. When I do this I seem to get a lot of failures: gluster> volume rebalance MAIL status Node Rebalanced-files size scanned failures status --------- -----------