similar to: The state of btrfs RAID6 as of kernel 3.13-rc1

Hi list, I am using kernel 3.9.0, btrfs-progs 0.20-rc1-253-g7854c8b. I have a three disk array of level single: # btrfs fi sh Label: none uuid: 2e905f8f-e525-4114-afa6-cce48f77b629 Total devices 3 FS bytes used 3.80TB devid 1 size 2.73TB used 2.25TB path /dev/sdd devid 2 size 2.73TB used 1.55TB path /dev/sdc devid 3 size 2.73TB used 0.00 path /dev/sdb

i am looking at using btrfs for a new project and i have a few questions:     * i have heard that as it currently stands Btrfs has some issues to be used as a Lustre file system; is he aware of the issues and any plans to address these and integrate Btrfs in to Lustre     * any plans to support native clustering on Btrfs     * on ZFS the ZIL is a separate device, any plans to implement a the

Hi, I''ve observed a rather strange behaviour while trying to mount two identical copies of the same image to different mount points. Each modification to one image is also performed in the second one. Example: dd if=/dev/sda? of=image1 bs=1M cp image1 image2 mount -o loop image1 m1 mount -o loop image2 m2 touch m2/hello ls -la m1 //will now also include a file calles "hello"

Hello guys, i try to convert ext4 volume, but btrfs-convert show me error: "No valid Btrfs found on file unable to open ctree conversion aborted." Ubuntu 13.04 Kernel: 3.11 btrfs-progs git version 0.20-git20130822~194aa4a13 way to reproduce error: $ truncate -s 4G file $ mkfs.ext4 file #say yes to create fs on non block device. $ btrfs-convert file No valid Btrfs found on file unable

I''ve just pushed out a new integration branch to my git repo. This is purely bugfix patches -- there are no new features in this issue of the integration branch. I''ve got a stack of about a dozen more patches with new features in them still to go. I''ll be working on those tomorrow. As always, there''s minimal testing involved here, but it does at least compile on

Hello list, i know what btrfs don''t support swap files. I read arch wiki and when i reading about systemd addon for auto create swapfile on btrfs, i invent the way, how create and using swap file, just see following sh code: swapfile=$(losetup -f) #free loop device truncate -s 8G /swap #create 8G sparse swap file losetup $swapfile /swap #mount file to loop mkswap $swapfile swapon

Does not load. Wondering if this should work or has been moved ? Thanks, Anand -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

I''m having some trouble working out how to make the SDL interface for HVM domUs appear. The documentation simply says "it will appear" when you start the domU, but doesn''t state what packages or libraries are needed in order for this magic to happen, or explain how to debug it if it doesn''t happen. All that I''m getting at the moment is a domU (running

I''m trying to install RHEL 4 on an HVM (Core 2 Duo). However, when the RHEL installer tries to start the kernel, it complains that the CPU doesn''t support extended mode, and that I should use a 32-bit installer. However: hrm@willow:~$ sudo xm info | grep xen_caps xen_caps : xen-3.0-x86_64 hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 Is there some magic I

Hey all, Just did a btrfs balance on a single device. Before the balance operation here is the df result: inglor@tiamat ~$ btrfs fi df /home Data: total=19.19GB, used=9.34GB System, DUP: total=32.00MB, used=4.00KB Metadata, DUP: total=896.00MB, used=227.98MB Then I issues a balance operation relocating the chunks across a single device: inglor@tiamat ~$ sudo btrfs fi balance /home [sudo]

Hi, I wanted to create a new btrfs fs for my backups. When trying to mkfs.btrfs for that device, I''m getting "error checking /dev/loop2 mount status" With strace I see where the problem is: lstat("/dev/disk/by-id/ata-INTEL_SSDSA2M160G2GC_CVPO939201JX160AGN-par", 0x7fffa30b3cf0) = -1 ENOENT (No such file or directory) The problem is there is something missing

After a reorganisation of patches, and sending a bunch of them to Chris, I''ve also updated the integration branch to match that. It''s available from: http://git.darksatanic.net/repo/btrfs-progs-unstable.git/ integration-20110630 The shortlog of 17 patches in this branch beyond the ones I''ve sent to Chris is below. Hugo. Andreas Philipp (1): print parent

Hi. I am seriously considering employing btrfs on my systems, particularly due to some space-saving features that it has (namely, deduplication and compression). In fact, I was (a few moments ago) trying to back up some of my systems to a 2TB HD that has an ext4 filesystem and, in the middle of the last one, I got the error message that the backup HD was full. Given that what I backup there are

Hi, my btrfs "hangs" when doing a balance operation. I''m using a 3.7.1 kernel from opensuse: linux-opzz 3.7.1-2.10-m4 #11 SMP PREEMPT Fri Jan 11 18:04:04 CET 2013 x86_64 x86_64 x86_64 GNU/Linux and Btrfs v0.19+ I did a scrub which completed without errors. Then I tried "btrfs filesystem balance /" which work fine for the first 23 of 46 chunks, then ist stopped

I''m trying to compile the btrfs source code but I''m getting an error. Any suggestions? Thanks Joe [root@ol6 btrfs-progs]# uname -a Linux ol6.localdomain 2.6.39-400.17.2.el6uek.x86_64 #1 SMP Wed Mar 13 12:31:05 PDT 2013 x86_64 x86_64 x86_64 GNU/Linux [root@ol6 src]# git clone git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git Initialized empty Git repository in

I came across the tidbit that ZFS has a contract guarantee that the data read back will either be correct (the checksum computed over the data read from the disk matches the checksum stored on disk), or you get an I/O error. Obviously, this greatly reduces the probability that the data is invalid. (Particularly when taken in combination with the disk firmware''s own ECC and checksumming.)

How can I verify the read speed of a btrfs raid0 pair in archlinux.? I assume raid0 means striped activity in a paralleled mode at lease similar to raid0 in mdadm. How can I measure the btrfs read speed since it is copy-on-write which is not the norm in mdadm raid0.? Perhaps I cannot use the same approach in btrfs to determine the performance. Secondly, I see a methodology for raid10 using

Hi, how can I do the following in a shell script: - check whether my file system supports cp --reflink? - check whether two files share the same data on disk, i.e. one has been created by cp --reflink of the other? Thank you! Thomas Koch -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info

Hi, the situation: Label: ''RootFS''  uuid: c87975a0-a575-405e-9890-d3f7f25bbd96     Total devices 2 FS bytes used 284.98GB     devid    2 size 311.82GB used 286.51GB path /dev/sdb3     devid    1 size 897.76GB used 286.51GB path /dev/sda3 RootFS created when sda3 was 897.76GB and sdb3 311.82GB. I have now freed other space on sdb. So I deleted sdb3 and recreated it occupying all

I have been experimenting exporting btrfs subvolumes over nfs. Main subvolume is filesys1 mounted at /filesys1. Below this is subvolume base, user1 is in base and documents is in user1. documents is mounted at /documents. /etc/exports is: /filesys1/base/user1 172.16.0.0/24(rw,no_acl,no_root_squash,fsid=0) /filesys1/user1-snapshot 172.16.0.0/24(rw,no_acl,no_root_squash,fsid=0)